# XP24 end point does not send beacon requests

**URL:** <https://forums.digi.com/t/xp24-end-point-does-not-send-beacon-requests/1600>\
**Category:** XBee - 802.15.4\
**Created:** [December 2, 2010, 6:27am UTC](https://forums.digi.com/t/xp24-end-point-does-not-send-beacon-requests/1600 "2010-12-02T06:27:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![butasan](https://avatars.discourse-cdn.com/v4/letter/b/74df32/32.png) [@butasan](https://forums.digi.com/u/butasan)\
**Post date:** [December 2, 2010, 6:27am UTC](https://forums.digi.com/t/xp24-end-point-does-not-send-beacon-requests/1600/1 "2010-12-02T06:27:47Z")

</div>

My coordinator is a XStick1 and the end device is a XP24. I configure XP24 as below but it does not send any beacon request (the sniffer can’t capture any packet). I use a Jennic module as an end device, it can assoicate to XStick1 and the sniffer can capture all packets. Any suggestion?

xb24\_15\_4\_10e8.mxi  
FE  
0  
231  
10E8  
0  
[A]CH=B  
[A]ID=A55  
[A]DH=0  
[A]DL=FFFF  
[A]MY=3  
[A]MM=0  
[A]RR=0  
[A]RN=0  
[A]NT=19  
[A]NO=0  
[A]CE=0  
[A]SC=1FFE  
[A]SD=4  
[A]A1=7  
[A]A2=0  
[A]EE=0  
[A]NI=  
[A]PL=4  
[A]CA=2C  
[A]SM=0  
[A]ST=1388  
[A]SP=0  
[A]DP=3E8  
[A]SO=0  
[A]BD=6  
[A]NB=0  
[A]RO=3  
[A]AP=0  
[A]PR=FF  
[A]D8=0  
[A]D7=1  
[A]D6=0  
[A]D5=1  
[A]D4=0  
[A]D3=0  
[A]D2=0  
[A]D1=0  
[A]D0=0  
[A]IU=1  
[A]IT=1  
[A]IC=0  
[A]IR=0  
[A]IA=FFFFFFFFFFFFFFFF  
[A]T0=7  
[A]T1=FF  
[A]T2=FF  
[A]T3=FF  
[A]T4=FF  
[A]T5=FF  
[A]T6=FF  
[A]T7=FF  
[A]P0=1  
[A]P1=0  
[A]PT=FF  
[A]RP=28  
[A]DD=10000  
[A]CT=64  
[A]GT=3E8  
[A]CC=2B