# XStick work with Thirdparty components (atmel)

**URL:** <https://forums.digi.com/t/xstick-work-with-thirdparty-components-atmel/785>\
**Category:** XBee - Zigbee\
**Created:** [November 10, 2011, 5:45pm UTC](https://forums.digi.com/t/xstick-work-with-thirdparty-components-atmel/785 "2011-11-10T17:45:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![chrisK](https://avatars.discourse-cdn.com/v4/letter/c/6de8d8/32.png) [@chrisK](https://forums.digi.com/u/chrisK)\
**Post date:** [November 10, 2011, 5:45pm UTC](https://forums.digi.com/t/xstick-work-with-thirdparty-components-atmel/785/1 "2011-11-10T17:45:20Z")

</div>

Hello,

I have an digi Xstick 2-ZB, which should receive data frames from atmel (Atmega1281).

This stick had to work as Coordinator in the zigbee network and hat to transmit the incomming data frames to the VCP (Virtual Com Port).

Both (digi and atmel) use the zibee standard … Are they compatible to each other?

How could I receive every sended telegrams?  
And if there any sniffer, too look up the sending telegrams?

Kind regards  
chrisK

---

<div class="post-metadata">

**Author:** ![shahrj1988](https://avatars.discourse-cdn.com/v4/letter/s/c4cdca/32.png) [@shahrj1988](https://forums.digi.com/u/shahrj1988)\
**Post date:** [November 14, 2011, 12:43am UTC](https://forums.digi.com/t/xstick-work-with-thirdparty-components-atmel/785/2 "2011-11-14T00:43:23Z")

</div>

Only ZigBee 2006 mode can help to communicate with each other for interoperability to some extend where ZS=1