# XStick XU-A11 to XA-A14 485 Adapter, severe response timing issues.

**URL:** <https://forums.digi.com/t/xstick-xu-a11-to-xa-a14-485-adapter-severe-response-timing-issues/13021>\
**Category:** XBee - 802.15.4\
**Tags:** xstick, delay, 4, 15, 802\
**Created:** [May 23, 2014, 11:05am UTC](https://forums.digi.com/t/xstick-xu-a11-to-xa-a14-485-adapter-severe-response-timing-issues/13021 "2014-05-23T11:05:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jsisson01](https://avatars.discourse-cdn.com/v4/letter/j/858c86/32.png) [@jsisson01](https://forums.digi.com/u/jsisson01)\
**Post date:** [May 23, 2014, 11:05am UTC](https://forums.digi.com/t/xstick-xu-a11-to-xa-a14-485-adapter-severe-response-timing-issues/13021/1 "2014-05-23T11:05:44Z")

</div>

I’m using the XA-A14 RS485 converter with a matching XStick XU-A11 to use as a serial cable replacement. The problem I’m having is that they are causing response delays for the information my application needs. I’m wondering what settings would need to be changed in order to reduce or eliminate any delays/overhead that might be holding it back. Thanks for the help.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [May 23, 2014, 1:56pm UTC](https://forums.digi.com/t/xstick-xu-a11-to-xa-a14-485-adapter-severe-response-timing-issues/13021/2 "2014-05-23T13:56:23Z")

</div>

Try setting the DL and DH of the XStick to the SL and SH of the RS485 adapter.
