# Zigbee network with arduino **URL:** \ **Category:** XBee Programamble (S2C & 900 HP)\ **Tags:** arduino, xbee\ **Created:** [February 25, 2015, 1:46pm UTC](https://forums.digi.com/t/zigbee-network-with-arduino/14431 "2015-02-25T13:46:10Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![ousan35](https://avatars.discourse-cdn.com/v4/letter/o/a698b9/32.png) [@ousan35](https://forums.digi.com/u/ousan35)\ **Post date:** [February 25, 2015, 1:46pm UTC](https://forums.digi.com/t/zigbee-network-with-arduino/14431/1 "2015-02-25T13:46:10Z")
Hi friends, i try to set a wireless sensor network. i use 5 xbee modules. 4 enddevice,1 coordinator. 1 enddevice has 1 digital input(AT Mode) 1 enddevice has 2 digital input(AT Mode) 1 enddevice has 1 analog and 1 digital input(AT Mode) 1 enddevice is connected to arduino(AT Mode) 1 coordinator is connected to arduino (API Mode) i try to receive data from all of enddevices. sometimes i get data from 3 of 4. sometimes one e.d. send data two times before other devices send.why it happens? ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [February 25, 2015, 2:10pm UTC](https://forums.digi.com/t/zigbee-network-with-arduino/14431/2 "2015-02-25T14:10:36Z")
What other settings do you have the end devices set to? ---
**Author:** ![ousan35](https://avatars.discourse-cdn.com/v4/letter/o/a698b9/32.png) [@ousan35](https://forums.digi.com/u/ousan35)\ **Post date:** [February 25, 2015, 11:21pm UTC](https://forums.digi.com/t/zigbee-network-with-arduino/14431/3 "2015-02-25T23:21:27Z")
there are 4 pictures which contains my enddevice configuration. [http://i59.tinypic.com/2saz0d5.jpg](http://i59.tinypic.com/2saz0d5.jpg) [http://i59.tinypic.com/1qjw9x.jpg](http://i59.tinypic.com/1qjw9x.jpg) [http://i57.tinypic.com/9pwbw2.jpg](http://i57.tinypic.com/9pwbw2.jpg) [http://i60.tinypic.com/2z50wzs.jpg](http://i60.tinypic.com/2z50wzs.jpg) actually i don’t have any problem about xbee modules. i think my problem is communication. i tried to communicate end devices with coordinator individually, i ve done. there is a picture below which is my test result. all of them were done before and i used 1 enddevice and a coordinator. [http://i59.tinypic.com/e5k8cl.jpg](http://i59.tinypic.com/e5k8cl.jpg) but when i set the network i can’t receive data properly. ---
**Author:** ![Sumer](https://avatars.discourse-cdn.com/v4/letter/s/8baadc/32.png) [@Sumer](https://forums.digi.com/u/Sumer)\ **Post date:** [February 26, 2015, 8:49am UTC](https://forums.digi.com/t/zigbee-network-with-arduino/14431/4 "2015-02-26T08:49:15Z")
May I ask is there anyway we are able to view the data in a specific location in the memory of RCM6750 especially the RAM? Someone suggest me to view the .org files after compilation but it only stated the memory range and used range for a specific type of memory. * * * Sumer ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [March 3, 2015, 2:58pm UTC](https://forums.digi.com/t/zigbee-network-with-arduino/14431/5 "2015-03-03T14:58:26Z")
You will need to asks that question in the Rabbit Support area or contact Rabbit support direct. ---
**Author:** ![tiabarber](https://avatars.discourse-cdn.com/v4/letter/t/50afbb/32.png) [@tiabarber](https://forums.digi.com/u/tiabarber)\ **Post date:** [April 16, 2015, 7:59am UTC](https://forums.digi.com/t/zigbee-network-with-arduino/14431/6 "2015-04-16T07:59:23Z")
with ZigBee, XBee, Arduino, and Processing … guide, you’ll have built a series of useful projects, including a complete ZigBee [six sigma](http://www.esixsigma.org) wireless network that delivers.