# ZigBee-S2-PRO

**URL:** <https://forums.digi.com/t/zigbee-s2-pro/19420>\
**Category:** XBee - DigiMesh\
**Tags:** zigbee-s2-pro\
**Created:** [April 24, 2018, 11:57am UTC](https://forums.digi.com/t/zigbee-s2-pro/19420 "2018-04-24T11:57:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rodrivenc](https://avatars.discourse-cdn.com/v4/letter/r/5fc32e/32.png) [@rodrivenc](https://forums.digi.com/u/rodrivenc)\
**Post date:** [April 24, 2018, 11:57am UTC](https://forums.digi.com/t/zigbee-s2-pro/19420/1 "2018-04-24T11:57:04Z")

</div>

good! I am trying to create a mesh network (mesh network) with xbee S2 PRO, the question is as follows, can I configure the coordinator in AT mode ?, or in this mode, does it support the type of topology that I want to build?
