# \#- **URL:** https://forums.digi.com/tag/548-tag/548.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [For embedded linux 9210 do we need a linux machine](https://forums.digi.com/t/for-embedded-linux-9210-do-we-need-a-linux-machine/23013)
**Author:** [@Prabha](https://forums.digi.com/u/Prabha)\ **Replies:** 3\ **Last updated:** [May 24, 2022, 8:48am UTC](https://forums.digi.com/t/for-embedded-linux-9210-do-we-need-a-linux-machine/23013 "2022-05-24T08:48:55Z")
I would like to know if for a ConnectMe9210 Embedded Linux platform we need a dedicated linux machine for development. I would also like to know if the libraries supporting FTP, Serial communication and similar services … --- ## [XBee3 delay receiving data when destination address is 0x00....FFFF (broadcast)](https://forums.digi.com/t/xbee3-delay-receiving-data-when-destination-address-is-0x00-ffff-broadcast/20057)
**Author:** [@pirobotics](https://forums.digi.com/u/pirobotics)\ **Replies:** 2\ **Last updated:** [January 25, 2024, 1:37pm UTC](https://forums.digi.com/t/xbee3-delay-receiving-data-when-destination-address-is-0x00-ffff-broadcast/20057 "2024-01-25T13:37:26Z")
Hi, Been testing a couple of Xbee 3’s that we’d like to use and I’ve noticed a problem with broadcast mode when in transparent mode. I’ll outline the setup below: latest firmware on both units xbee1: set to controller … --- ## [Xbee3 802.15.4 - problem - I'm migrating to XBEE3.](https://forums.digi.com/t/xbee3-802-15-4-problem-im-migrating-to-xbee3/20208)
**Author:** [@EduTruck](https://forums.digi.com/u/EduTruck)\ **Replies:** 7\ **Last updated:** [July 21, 2023, 3:06pm UTC](https://forums.digi.com/t/xbee3-802-15-4-problem-im-migrating-to-xbee3/20208 "2023-07-21T15:06:56Z")
I already use the XBEE S1 and S2 module in my product, I’m migrating to XBEE3. With the XBEE S1 / S2 modules, everything works fine. In XBEE3 with the UART firmware 802.15.4, either it works for a while and stops, or w… --- ## [Problems with System State Backup because of Anywhere USB](https://forums.digi.com/t/problems-with-system-state-backup-because-of-anywhere-usb/16317)
**Author:** [@mkruege](https://forums.digi.com/u/mkruege)\ **Replies:** 4\ **Last updated:** [July 19, 2023, 6:33pm UTC](https://forums.digi.com/t/problems-with-system-state-backup-because-of-anywhere-usb/16317 "2023-07-19T18:33:43Z")
We are experiencing systemstate backup-problems of a windows 2008 x64-server with anywhere usb-drivers (V2.70 installed in 2010, updated to V3.51 in the meantime.) Reviewing the logs it looks like: https://www.veritas.… --- ## [Is it possible for XBee PRO S2C to communicate with stm32WB55 with zigbee protocol?](https://forums.digi.com/t/is-it-possible-for-xbee-pro-s2c-to-communicate-with-stm32wb55-with-zigbee-protocol/23177)
**Author:** [@sreekumarcmet](https://forums.digi.com/u/sreekumarcmet)\ **Replies:** 5\ **Last updated:** [August 9, 2022, 7:18am UTC](https://forums.digi.com/t/is-it-possible-for-xbee-pro-s2c-to-communicate-with-stm32wb55-with-zigbee-protocol/23177 "2022-08-09T07:18:00Z")
If so what changes to be done in XCTU to bring this interoperability? --- ## [The Ethernet activity after application update](https://forums.digi.com/t/the-ethernet-activity-after-application-update/23030)
**Author:** [@pshih](https://forums.digi.com/u/pshih)\ **Replies:** 2\ **Last updated:** [April 18, 2022, 11:20am UTC](https://forums.digi.com/t/the-ethernet-activity-after-application-update/23030 "2022-04-18T11:20:17Z")
We have implemented a custom application Version 2.0.0 based on the NetOS7.3 for Digi Connect ME -C module. A few month ago, We have upgrade the application version 2.1.0 with Net+OS to 7.5 and other bug fix. Recently w… --- ## [XBee 3 timing (reset and sleep)](https://forums.digi.com/t/xbee-3-timing-reset-and-sleep/23045)
**Author:** [@johndoe404](https://forums.digi.com/u/johndoe404)\ **Replies:** 1\ **Last updated:** [April 15, 2022, 9:15am UTC](https://forums.digi.com/t/xbee-3-timing-reset-and-sleep/23045 "2022-04-15T09:15:52Z")
Hello everyone, I’m using XBEE3 modules (xb3-2478pt-J), with latest 802.15.4 firmware. When my system starts, it resets XBEE module (using RESET pin). I have search through user manual (90002273) and hardware reference… --- ## [Xbee3 won't transmit data](https://forums.digi.com/t/xbee3-wont-transmit-data/22956)
**Author:** [@UTG](https://forums.digi.com/u/UTG)\ **Replies:** 1\ **Last updated:** [February 18, 2022, 10:48am UTC](https://forums.digi.com/t/xbee3-wont-transmit-data/22956 "2022-02-18T10:48:10Z")
Xbee3 micro stopped sending data , receives data okay , BT connects to Phone, Device Set as router as is other units that work , running 300D firmware , packet size only 5 bytes , hardware flow control off. regards Ric… --- ## [Digi One IAP not recieving data RS485 two wire half duplex 9600 bd no echo](https://forums.digi.com/t/digi-one-iap-not-recieving-data-rs485-two-wire-half-duplex-9600-bd-no-echo/22845)
**Author:** [@marcm9870](https://forums.digi.com/u/marcm9870)\ **Replies:** 2\ **Last updated:** [December 15, 2021, 10:53am UTC](https://forums.digi.com/t/digi-one-iap-not-recieving-data-rs485-two-wire-half-duplex-9600-bd-no-echo/22845 "2021-12-15T10:53:33Z")
i cannot seem to get a connection when using the DIGIone IAP. I can take the same two wires to a 485-usb convertor and read everything on modscan but when i hook those up to 3&4 or 6&7 or both 3 jumped to 6 and 4 jumped… --- ## [Why does DigiOne IAP not accept address bit data files B20/16 ?](https://forums.digi.com/t/why-does-digione-iap-not-accept-address-bit-data-files-b20-16/22650)
**Author:** [@Max\_Tomassian](https://forums.digi.com/u/Max_Tomassian)\ **Replies:** 1\ **Last updated:** [September 8, 2021, 12:35am UTC](https://forums.digi.com/t/why-does-digione-iap-not-accept-address-bit-data-files-b20-16/22650 "2021-09-08T00:35:59Z")
Hi team, I sent a number of emails but no reply to date since early morning/AM US time 3rd Sept-2021. I have also tried to call this afternoon US time 4.15pm 6th Sept-2021 with no ability to speak to anyone. Customer s… --- ## [Port Isolate can all LANs have the same subnet addresses? WR44.](https://forums.digi.com/t/port-isolate-can-all-lans-have-the-same-subnet-addresses-wr44/22589)
**Author:** [@basicdave](https://forums.digi.com/u/basicdave)\ **Replies:** 0\ **Last updated:** [August 9, 2021, 9:37am UTC](https://forums.digi.com/t/port-isolate-can-all-lans-have-the-same-subnet-addresses-wr44/22589 "2021-08-09T09:37:02Z")
I am trying to create redundant LANs for a lab with multiple benches. I want to be able to move instruments from one bench to another so need to create multiple LANs that they can plug into with the same address. I curr… --- ## [TS4 Upgrade failure - Upload status: Not a proper FEP image](https://forums.digi.com/t/ts4-upgrade-failure-upload-status-not-a-proper-fep-image/22467)
**Author:** [@jayjay](https://forums.digi.com/u/jayjay)\ **Replies:** 2\ **Last updated:** [July 21, 2021, 9:13am UTC](https://forums.digi.com/t/ts4-upgrade-failure-upload-status-not-a-proper-fep-image/22467 "2021-07-21T09:13:53Z")
Hi, Attempts to upgrade my Portserver TS4 to the latest POST (and Firmware) builds are failing. Both HTTP and TFTP upgrade methods come back with the “Upload status: Not a proper FEP image.” msg. Is this is truly an ima… --- ## [HUBPORT 7C causes devices to fail FW upgrade via Segger JLINK](https://forums.digi.com/t/hubport-7c-causes-devices-to-fail-fw-upgrade-via-segger-jlink/22546)
**Author:** [@cuwittrock](https://forums.digi.com/u/cuwittrock)\ **Replies:** 1\ **Last updated:** [July 20, 2021, 10:21am UTC](https://forums.digi.com/t/hubport-7c-causes-devices-to-fail-fw-upgrade-via-segger-jlink/22546 "2021-07-20T10:21:37Z")
Hi, We have just purchased a HUBPORT 7C with power supply. To this we have connected a NRF58240 eval board. But when we want to flash this board with JLINK (Segger) it fails. It works without the hub and it works with o… --- ## ['\\xFF' is transmitted twice under profile "TCP Sockets"](https://forums.digi.com/t/xff-is-transmitted-twice-under-profile-tcp-sockets/22465)
**Author:** [@LTTEY](https://forums.digi.com/u/LTTEY)\ **Replies:** 0\ **Last updated:** [June 9, 2021, 9:13am UTC](https://forums.digi.com/t/xff-is-transmitted-twice-under-profile-tcp-sockets/22465 "2021-06-09T09:13:52Z")
I am using following Digi PortServer Model: PortServer TS 4 MEI Firmware Version: Version 82000747\_X 02/07/2018 My current system requirement is to communicate with a serial device through ethernet connection, so we a… --- ## [Since I deleted UART module in Codewarrior, I get this error](https://forums.digi.com/t/since-i-deleted-uart-module-in-codewarrior-i-get-this-error/18197)
**Author:** [@herrmattoon](https://forums.digi.com/u/herrmattoon)\ **Replies:** 3\ **Last updated:** [April 28, 2021, 9:54pm UTC](https://forums.digi.com/t/since-i-deleted-uart-module-in-codewarrior-i-get-this-error/18197 "2021-04-28T21:54:47Z")
Hi all, Today, I wanted to delete the UART of my project to use the pins 3 and 4 (SMT module) as gpios. Unfortunately, after I started the project’s building, I got this message : Symbol TERMIO\_PutChar in file C:/Frees… --- ## [WR44, pcap to USB](https://forums.digi.com/t/wr44-pcap-to-usb/22365)
**Author:** [@S-conne](https://forums.digi.com/u/S-conne)\ **Replies:** 0\ **Last updated:** [April 20, 2021, 12:37pm UTC](https://forums.digi.com/t/wr44-pcap-to-usb/22365 "2021-04-20T12:37:59Z")
Hi We need to do an extended loggin on a wr44. For this we will use an usb stick. We know how to set up logging and redirect both the eventlog and the analyzer to usb. But my question is if there are any way to also au… --- ## [Anyone used a XBee3 CAT-M/NB-IoT modem in the UK on Vodafone?](https://forums.digi.com/t/anyone-used-a-xbee3-cat-m-nb-iot-modem-in-the-uk-on-vodafone/22230)
**Author:** [@ravenb72](https://forums.digi.com/u/ravenb72)\ **Replies:** 6\ **Last updated:** [March 22, 2021, 10:28am UTC](https://forums.digi.com/t/anyone-used-a-xbee3-cat-m-nb-iot-modem-in-the-uk-on-vodafone/22230 "2021-03-22T10:28:19Z")
We sent a device to the UK that is supposed to use Vodafone’s NB-IoT network. It’s not working and to make things worse we don’t have access to any kind of user interface. Is there any fundamental reason why the modem m… --- ## [How to use Binary command mode?](https://forums.digi.com/t/how-to-use-binary-command-mode/22229)
**Author:** [@majellan](https://forums.digi.com/u/majellan)\ **Replies:** 3\ **Last updated:** [February 23, 2021, 10:15am UTC](https://forums.digi.com/t/how-to-use-binary-command-mode/22229 "2021-02-23T10:15:39Z")
In command mode if we want to change the network ID we do the following: 1- enter command mode through serial port and write ‘+++’, and wait for ok response. 2- Write ‘ATID 3223’ to change ID to 3223. 3- Exit command … --- ## [Connecting a DHT11 sensor with XBee Series 2 without external microcontroller using Java](https://forums.digi.com/t/connecting-a-dht11-sensor-with-xbee-series-2-without-external-microcontroller-using-java/18684)
**Author:** [@Jserra](https://forums.digi.com/u/Jserra)\ **Replies:** 7\ **Last updated:** [January 28, 2021, 7:44am UTC](https://forums.digi.com/t/connecting-a-dht11-sensor-with-xbee-series-2-without-external-microcontroller-using-java/18684 "2021-01-28T07:44:58Z")
Hi! I am working in a project with Xbee Series 2 and Java, and I would to know how can I connect the digital output of DHT11 to a Xbee module’s input and read the samples from my Java app, because I have been looking for… --- ## [How to connect XBEE3 to UART with another controller?](https://forums.digi.com/t/how-to-connect-xbee3-to-uart-with-another-controller/20336)
**Author:** [@yash023](https://forums.digi.com/u/yash023)\ **Replies:** 1\ **Last updated:** [October 22, 2020, 9:55am UTC](https://forums.digi.com/t/how-to-connect-xbee3-to-uart-with-another-controller/20336 "2020-10-22T09:55:37Z")
Hello, My self Yash Shah and I will start communicating an XBEE3 to UART Communication with another controller so can you just suggest me some step and AT command of UART communication? Regards Yash Shah --- ## [fat\_delete does not delete files with zero length](https://forums.digi.com/t/fat-delete-does-not-delete-files-with-zero-length/21779)
**Author:** [@pfitze](https://forums.digi.com/u/pfitze)\ **Replies:** 3\ **Last updated:** [September 22, 2020, 11:18am UTC](https://forums.digi.com/t/fat-delete-does-not-delete-files-with-zero-length/21779 "2020-09-22T11:18:30Z")
fat\_delete fails with errno EFAULT (-14) if the file has a size of 0 bytes. The file is copied to the Rabbit via FTP. The result is, that the file cannot be deleted at all. What is wrong? --- ## [DNS Server Spoofing](https://forums.digi.com/t/dns-server-spoofing/21725)
**Author:** [@xtri001](https://forums.digi.com/u/xtri001)\ **Replies:** 0\ **Last updated:** [August 31, 2020, 8:52am UTC](https://forums.digi.com/t/dns-server-spoofing/21725 "2020-08-31T08:52:40Z")
Any suggestions in stopping the spoofing on a WR21 using the firewall? --- ## [Connect Core 6UL start daemon with systemd](https://forums.digi.com/t/connect-core-6ul-start-daemon-with-systemd/17850)
**Author:** [@dLagnie](https://forums.digi.com/u/dLagnie)\ **Replies:** 3\ **Last updated:** [July 30, 2020, 8:12am UTC](https://forums.digi.com/t/connect-core-6ul-start-daemon-with-systemd/17850 "2020-07-30T08:12:57Z")
Hello, i need to use the command systemctl for start a daemon, i add the systemd recipes MAGE\_INSTALL\_append = " strace systemd" i have this error: digi@digi-vm:~/workspace/EthV2$ bitbake core-image-base NOTE: Start… --- ## [XBee 3 modules no longer recognized by XCTU](https://forums.digi.com/t/xbee-3-modules-no-longer-recognized-by-xctu/21429)
**Author:** [@tw.lewis](https://forums.digi.com/u/tw.lewis)\ **Replies:** 6\ **Last updated:** [June 25, 2020, 10:26am UTC](https://forums.digi.com/t/xbee-3-modules-no-longer-recognized-by-xctu/21429 "2020-06-25T10:26:21Z")
I have two XBee3 SMT Grove Development boards. When I run XCTU, they don’t show up. I suspect that they are running MicroPython flash programs and won’t connect to the PC. Is there a ‘master reset’ or some other way to s… --- ## [does rabbitcore support USB OTG](https://forums.digi.com/t/does-rabbitcore-support-usb-otg/21447)
**Author:** [@Integrator](https://forums.digi.com/u/Integrator)\ **Replies:** 2\ **Last updated:** [June 10, 2020, 2:06pm UTC](https://forums.digi.com/t/does-rabbitcore-support-usb-otg/21447 "2020-06-10T14:06:03Z")
USB --- ## [Send and receive failed](https://forums.digi.com/t/send-and-receive-failed/21408)
**Author:** [@christopher](https://forums.digi.com/u/christopher)\ **Replies:** 2\ **Last updated:** [May 28, 2020, 9:39am UTC](https://forums.digi.com/t/send-and-receive-failed/21408 "2020-05-28T09:39:29Z")
Hello I have a XTP9B-DPS-001 board, and although it is properly connected to XCTU software, its transmitter is damaged. I replaced the ADF 7023 transceiver, but it still doesn’t send or receive data. Is this transceiver… --- ## [XBEE PRO SX 900 : Compatibility Between XBP9X-DMUS-011 and XBP9X-DMRS-001](https://forums.digi.com/t/xbee-pro-sx-900-compatibility-between-xbp9x-dmus-011-and-xbp9x-dmrs-001/21383)
**Author:** [@barrera](https://forums.digi.com/u/barrera)\ **Replies:** 1\ **Last updated:** [May 19, 2020, 2:25pm UTC](https://forums.digi.com/t/xbee-pro-sx-900-compatibility-between-xbp9x-dmus-011-and-xbp9x-dmrs-001/21383 "2020-05-19T14:25:36Z")
Dear all, First of all, we evaluated the XBEE SX PRO trough the development kit XK9X-DMS-0, which comes with two boards containing the XBP9X-DMRS-001 module. After aproving the solution, we designed and built our appli… --- ## [Xbee to Arduino setup is only communicating one way](https://forums.digi.com/t/xbee-to-arduino-setup-is-only-communicating-one-way/17197)
**Author:** [@acuteangle](https://forums.digi.com/u/acuteangle)\ **Replies:** 8\ **Last updated:** [May 19, 2020, 11:22am UTC](https://forums.digi.com/t/xbee-to-arduino-setup-is-only-communicating-one-way/17197 "2020-05-19T11:22:35Z")
Hi, I am trying to control a robot wirelessly using XBees. I am using two XBees of the function set Xbee pro 900HP and the product family XBP9B-DPST-001. I have one XBee connected to my laptop via a USB dongle, and the … --- ## [How to set up da9063 watchdog for ConnectCore 6](https://forums.digi.com/t/how-to-set-up-da9063-watchdog-for-connectcore-6/21206)
**Author:** [@borgebjo](https://forums.digi.com/u/borgebjo)\ **Replies:** 1\ **Last updated:** [March 23, 2020, 7:36pm UTC](https://forums.digi.com/t/how-to-set-up-da9063-watchdog-for-connectcore-6/21206 "2020-03-23T19:36:45Z")
The ConnectCore6 SBCs have three watchdogs, two on the imx6 chip (where one is reserved for TrustZone stuff, which I haven’t looked into) and one on the DA9063 PMIC. DA9063 has regulators that powers the IMX6, DRAM, peri… --- ## [Can you transfer data collected from a dev board of the xbee3 directly to the USB port?](https://forums.digi.com/t/can-you-transfer-data-collected-from-a-dev-board-of-the-xbee3-directly-to-the-usb-port/21160)
**Author:** [@TrentJ](https://forums.digi.com/u/TrentJ)\ **Replies:** 1\ **Last updated:** [March 3, 2020, 9:36am UTC](https://forums.digi.com/t/can-you-transfer-data-collected-from-a-dev-board-of-the-xbee3-directly-to-the-usb-port/21160 "2020-03-03T09:36:24Z")
I am trying to store and forward temperature reading so that i can keep a log on a flashdrive as well as forward the data to a PC [Next page](https://forums.digi.com/tag/548-tag/548.md?match_all_tags=true&page=1&tags%5B%5D=-)