# \#adapter **URL:** https://forums.digi.com/tag/adapter/382.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [xbee 3 usb adapter as a Zigbee co-ordinator to linux gateway](https://forums.digi.com/t/xbee-3-usb-adapter-as-a-zigbee-co-ordinator-to-linux-gateway/21650)
**Author:** [@digesh](https://forums.digi.com/u/digesh)\ **Replies:** 2\ **Last updated:** [August 11, 2020, 7:51am UTC](https://forums.digi.com/t/xbee-3-usb-adapter-as-a-zigbee-co-ordinator-to-linux-gateway/21650 "2020-08-11T07:51:41Z")
Hi As a newbie on xbee community, I have few questions regarding the Xbee 3 USB adapter: Is the USB dongle meant for only sniffing the zigbee network? What is the zigbee radio chip being used in Xbee 3 USB adapter? If… --- ## [Sensor adapter](https://forums.digi.com/t/sensor-adapter/20575)
**Author:** [@Martin91](https://forums.digi.com/u/Martin91)\ **Replies:** 0\ **Last updated:** [June 21, 2019, 9:42am UTC](https://forums.digi.com/t/sensor-adapter/20575 "2019-06-21T09:42:51Z")
HI i have these products ; sensor adapter XA-B14-CS1R and watchport h . Can someone give me directions how to connect them ? Can I use digi esp for python to run them? Digi esp? Do i need Gateway x4? https://www.digikey… --- ## [And adapters for RF modules with 20 pin dip headers? How to connect to computer for programming?](https://forums.digi.com/t/and-adapters-for-rf-modules-with-20-pin-dip-headers-how-to-connect-to-computer-for-programming/20174)
**Author:** [@torriem](https://forums.digi.com/u/torriem)\ **Replies:** 0\ **Last updated:** [January 15, 2019, 8:21am UTC](https://forums.digi.com/t/and-adapters-for-rf-modules-with-20-pin-dip-headers-how-to-connect-to-computer-for-programming/20174 "2019-01-15T08:21:15Z")
I have some old 9xtend modules that I’d like to test to see if they are working. They have the 20 pin dip header on them. How do I connect these to a computer’s serial port so I can work with them from the the XCTU soft… --- ## [Modbus over Zigbee using XBee-Pro Zigbee RS485 Adapter and Xbee Gateway](https://forums.digi.com/t/modbus-over-zigbee-using-xbee-pro-zigbee-rs485-adapter-and-xbee-gateway/19950)
**Author:** [@andreastaran](https://forums.digi.com/u/andreastaran)\ **Replies:** 0\ **Last updated:** [October 17, 2018, 8:18am UTC](https://forums.digi.com/t/modbus-over-zigbee-using-xbee-pro-zigbee-rs485-adapter-and-xbee-gateway/19950 "2018-10-17T08:18:32Z")
Hi, I’m trying to get Modbus over Zigbee using “XBee-Pro Zigbee RS485 Adapter” and “Xbee Gateway”. I other words: Read and write Modbus registers on an external device connected to XBEE-Pro Zigbee Adapter from(/through… --- ## [How to configure my Xbee RS-485 adapter](https://forums.digi.com/t/how-to-configure-my-xbee-rs-485-adapter/19569)
**Author:** [@prasanna3ram](https://forums.digi.com/u/prasanna3ram)\ **Replies:** 0\ **Last updated:** [May 31, 2018, 12:12pm UTC](https://forums.digi.com/t/how-to-configure-my-xbee-rs-485-adapter/19569 "2018-05-31T12:12:11Z")
Hi, I would like to send data from my gateway to my end device through the Xbee RS-485 adapter. The gateway also has a xbee module and it can be programmed to send data to any particular destination. Now, I would like t… --- ## [Connecting XBee Modules to a Breadboard](https://forums.digi.com/t/connecting-xbee-modules-to-a-breadboard/18870)
**Author:** [@silver2row](https://forums.digi.com/u/silver2row)\ **Replies:** 1\ **Last updated:** [October 31, 2017, 9:20pm UTC](https://forums.digi.com/t/connecting-xbee-modules-to-a-breadboard/18870 "2017-10-31T21:20:35Z")
Hello, I am running Linux on a BeagleBone Black, i.e. Debian. Now, that is not the issue. I am having complications finding header pins that are premade to make my XBee modules accessible via a breadboard. I do not need… --- ## [Best way to determine whether a remote XBee is awake?](https://forums.digi.com/t/best-way-to-determine-whether-a-remote-xbee-is-awake/17367)
**Author:** [@ayoungpe](https://forums.digi.com/u/ayoungpe)\ **Replies:** 3\ **Last updated:** [December 1, 2016, 2:06pm UTC](https://forums.digi.com/t/best-way-to-determine-whether-a-remote-xbee-is-awake/17367 "2016-12-01T14:06:12Z")
The details: Python scripts are run from ConnectPortX2 The remote sleeping nodes are DigiMesh 2.4 drop-in networking adapters (analog, digital I/O, RS-485, etc.) The ConnectPortX2 is the sleep coordinator. The challe… --- ## [How to see XBee data on a terminal program?](https://forums.digi.com/t/how-to-see-xbee-data-on-a-terminal-program/17494)
**Author:** [@tcostello](https://forums.digi.com/u/tcostello)\ **Replies:** 4\ **Last updated:** [October 6, 2016, 5:01pm UTC](https://forums.digi.com/t/how-to-see-xbee-data-on-a-terminal-program/17494 "2016-10-06T17:01:11Z")
I have two XBee PRO S1 modules. One module is connected to an analog device, the other module is in a USB adapter. The modules are communicating, and I am receiving data, but the data is gibberish and keeps rapidly scrol… --- ## [How to use the data received from an XBee Pro S1 to a S1 USB adapter?](https://forums.digi.com/t/how-to-use-the-data-received-from-an-xbee-pro-s1-to-a-s1-usb-adapter/17475)
**Author:** [@tcostello](https://forums.digi.com/u/tcostello)\ **Replies:** 2\ **Last updated:** [September 29, 2016, 8:10pm UTC](https://forums.digi.com/t/how-to-use-the-data-received-from-an-xbee-pro-s1-to-a-s1-usb-adapter/17475 "2016-09-29T20:10:19Z")
I am new to XBee development, and have a XBee module hooked up to an analog device and is being sent to an XBee USB adapter. What I would like to know is: now that the devices are communicating, what do I do with the dat… --- ## [CAN I CHANGE THE FRIMWARE USING ARDIUNO SHIELD?](https://forums.digi.com/t/can-i-change-the-frimware-using-ardiuno-shield/15980)
**Author:** [@mahesh7393](https://forums.digi.com/u/mahesh7393)\ **Replies:** 2\ **Last updated:** [August 4, 2016, 3:39pm UTC](https://forums.digi.com/t/can-i-change-the-frimware-using-ardiuno-shield/15980 "2016-08-04T15:39:26Z")
CAN I CHANGE THE FRIMWARE USING ARDIUNO SHIELD? OR I MUST BUY A XBEE USB ADAPTER . OR ANY OTHER WAY PLEASE SUGGEST. --- ## [Sleeping AIO adapter](https://forums.digi.com/t/sleeping-aio-adapter/14970)
**Author:** [@progloverfan](https://forums.digi.com/u/progloverfan)\ **Replies:** 1\ **Last updated:** [June 12, 2015, 2:16pm UTC](https://forums.digi.com/t/sleeping-aio-adapter/14970 "2015-06-12T14:16:35Z")
Hi, I want to install a AIO Adapters DigiMesh as an End Device with batteries to send some periodic samples. Is it possible to sleep the adapter when the end device is off power? i.e can I use the sleep commands? I ask… --- ## [RS-485 Analog I/O Digital I/O works properly coupled to resistors, however when sensors 4-20mA are coupled didn’t work](https://forums.digi.com/t/rs-485-analog-i-o-digital-i-o-works-properly-coupled-to-resistors-however-when-sensors-4-20ma-are-coupled-didn-t-work/13702)
**Author:** [@srlager](https://forums.digi.com/u/srlager)\ **Replies:** 2\ **Last updated:** [October 13, 2014, 10:33am UTC](https://forums.digi.com/t/rs-485-analog-i-o-digital-i-o-works-properly-coupled-to-resistors-however-when-sensors-4-20ma-are-coupled-didn-t-work/13702 "2014-10-13T10:33:05Z")
Please, See test result at link: http://www.dec.uem.br/mbr/arq/test\_A\_I\_adpater.docx --- ## [xbee S2B pro won't communicate](https://forums.digi.com/t/xbee-s2b-pro-wont-communicate/13591)
**Author:** [@johnchua2005](https://forums.digi.com/u/johnchua2005)\ **Replies:** 3\ **Last updated:** [September 22, 2014, 8:36am UTC](https://forums.digi.com/t/xbee-s2b-pro-wont-communicate/13591 "2014-09-22T08:36:40Z")
I have a pair of xbee pro s2b set up with node ID = 2005 DH and DL addressed correspondingly ZS=0, i also tried ZS=2 for both the two modules just can’t seem to find each other, i use the adafruit xbee adapter as my b… --- ## [Adapter won't receive power when XBee series 1 is plugged in! HELP! (There's power when XBEE Series 2 is plugged in)](https://forums.digi.com/t/adapter-wont-receive-power-when-xbee-series-1-is-plugged-in-help-theres-power-when-xbee-series-2-is-plugged-in/13055)
**Author:** [@dinkymonkey](https://forums.digi.com/u/dinkymonkey)\ **Replies:** 1\ **Last updated:** [June 2, 2014, 8:07am UTC](https://forums.digi.com/t/adapter-wont-receive-power-when-xbee-series-1-is-plugged-in-help-theres-power-when-xbee-series-2-is-plugged-in/13055 "2014-06-02T08:07:36Z")
I have a little problem with XBee Series 1 and 2, or better to say: with the adapter! Days ago, I have tried to establish a network with XBee Series 2, which worked fine. Then I wanted to let XBee Series 1 communicate w… --- ## [Difference between USB XBee-PRO interface board PN XBIB-U and USB XBee-PRO professional interface board PN XBIB-U-DEV](https://forums.digi.com/t/difference-between-usb-xbee-pro-interface-board-pn-xbib-u-and-usb-xbee-pro-professional-interface-board-pn-xbib-u-dev/11696)
**Author:** [@Puskvor](https://forums.digi.com/u/Puskvor)\ **Replies:** 1\ **Last updated:** [May 13, 2014, 11:56am UTC](https://forums.digi.com/t/difference-between-usb-xbee-pro-interface-board-pn-xbib-u-and-usb-xbee-pro-professional-interface-board-pn-xbib-u-dev/11696 "2014-05-13T11:56:58Z")
What is difference between USB XBee-PRO interface board PN XBIB-U and USB XBee-PRO professional interface board PN XBIB-U-DEV --- ## [Wireless USB with XBee Pro](https://forums.digi.com/t/wireless-usb-with-xbee-pro/12606)
**Author:** [@ryfitzger227](https://forums.digi.com/u/ryfitzger227)\ **Replies:** 1\ **Last updated:** [March 3, 2014, 1:51pm UTC](https://forums.digi.com/t/wireless-usb-with-xbee-pro/12606 "2014-03-03T13:51:21Z")
Hello everyone. I’m very new to XBee and have finally gotten them to work how I wanted them to. I’d like to expand my use of XBees in my project and use them as a “Wireless USB Cord.” If that’s what I should call it. Ba… --- ## [Is Zigbee series 2(2mW) communicate with Pro S2B](https://forums.digi.com/t/is-zigbee-series-2-2mw-communicate-with-pro-s2b/12196)
**Author:** [@Bhagirath](https://forums.digi.com/u/Bhagirath)\ **Replies:** 0\ **Last updated:** [November 17, 2013, 11:44pm UTC](https://forums.digi.com/t/is-zigbee-series-2-2mw-communicate-with-pro-s2b/12196 "2013-11-17T23:44:33Z")
--- ## [Communication problem between BL4S230 and XBee Pro USB adapter](https://forums.digi.com/t/communication-problem-between-bl4s230-and-xbee-pro-usb-adapter/12063)
**Author:** [@pingyu](https://forums.digi.com/u/pingyu)\ **Replies:** 0\ **Last updated:** [October 15, 2013, 12:11am UTC](https://forums.digi.com/t/communication-problem-between-bl4s230-and-xbee-pro-usb-adapter/12063 "2013-10-15T00:11:52Z")
Hardware: BL4S230(20-101-1261) XBee USB Adapter ZB(PRO S2B) I program on BL4S230 board,send data from BL4S230 to XBee USB Adapter every 100mS. The Problem is : the data stream paused frequently on USB Adapter side. … --- ## [what to do when xctu indicates unable to connect to com port?](https://forums.digi.com/t/what-to-do-when-xctu-indicates-unable-to-connect-to-com-port/11761)
**Author:** [@Maheen](https://forums.digi.com/u/Maheen)\ **Replies:** 4\ **Last updated:** [September 28, 2013, 9:14am UTC](https://forums.digi.com/t/what-to-do-when-xctu-indicates-unable-to-connect-to-com-port/11761 "2013-09-28T09:14:55Z")
I am working on xbee pro modules for wireless communication. I purchased the adapter board and a breakout board for that too. previously when I connected my xbee with the adapter it worked fine and I was able to configur… --- ## [Firmware update bricked XBee Series 1 pro (parallax USB adapter) (noob)](https://forums.digi.com/t/firmware-update-bricked-xbee-series-1-pro-parallax-usb-adapter-noob/11826)
**Author:** [@DrVonTrap](https://forums.digi.com/u/DrVonTrap)\ **Replies:** 4\ **Last updated:** [September 28, 2013, 8:30am UTC](https://forums.digi.com/t/firmware-update-bricked-xbee-series-1-pro-parallax-usb-adapter-noob/11826 "2013-09-28T08:30:03Z")
hey, I updated the firmware on one of my Xbees. The update process failed near the end and I can no longer communicate with my modem. After a bit of research it seems this might be a common problem that solved by reflas… --- ## [xbee adapter compatible for XBee Pro 50mW RPSMA - Series 2 (ZigBee Mesh)](https://forums.digi.com/t/xbee-adapter-compatible-for-xbee-pro-50mw-rpsma-series-2-zigbee-mesh/11967)
**Author:** [@babayaro](https://forums.digi.com/u/babayaro)\ **Replies:** 1\ **Last updated:** [September 27, 2013, 4:36pm UTC](https://forums.digi.com/t/xbee-adapter-compatible-for-xbee-pro-50mw-rpsma-series-2-zigbee-mesh/11967 "2013-09-27T16:36:46Z")
Hello everyone! I would like to know if this xbee adapter (http://www.adafruit.com/products/126#Description) is compatible with xbee pro series 2. and if it’s not can you send me a link for a compatible one? --- ## [getting data from analog adapter (XBee AIO Adapter)](https://forums.digi.com/t/getting-data-from-analog-adapter-xbee-aio-adapter/11806)
**Author:** [@Madina888](https://forums.digi.com/u/Madina888)\ **Replies:** 0\ **Last updated:** [August 2, 2013, 4:58am UTC](https://forums.digi.com/t/getting-data-from-analog-adapter-xbee-aio-adapter/11806 "2013-08-02T04:58:11Z")
Hello! I have XBee AIO Adapter ZB Pro and connected it with temperature sensor LM335. Now I want to get data from an Analog adapter by API frames. In remote configuration I can see AIO adapter as a router. But I can’t… --- ## [How to read modbus data from RS-485 Adapter](https://forums.digi.com/t/how-to-read-modbus-data-from-rs-485-adapter/11475)
**Author:** [@sergiojgl](https://forums.digi.com/u/sergiojgl)\ **Replies:** 1\ **Last updated:** [May 10, 2013, 7:58am UTC](https://forums.digi.com/t/how-to-read-modbus-data-from-rs-485-adapter/11475 "2013-05-10T07:58:33Z")
Hello, I have a ConnectPort X4 and a RS-485 Adapter with 2 current sensors connected. I made what says this tutorial (Modbus Bridge on CPX4) but I don’t know what to do next. I tried to create a socket to send and get…