# \#adc **URL:** https://forums.digi.com/tag/adc/267.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [How to get ADC value in python from 6ul-start kit](https://forums.digi.com/t/how-to-get-adc-value-in-python-from-6ul-start-kit/22540)
**Author:** [@WaveSim](https://forums.digi.com/u/WaveSim)\ **Replies:** 1\ **Last updated:** [March 13, 2024, 1:23pm UTC](https://forums.digi.com/t/how-to-get-adc-value-in-python-from-6ul-start-kit/22540 "2024-03-13T13:23:59Z")
Hi guys, Deeply thanks for your support always. I am trying to set my 6ul-start board for my data logger project. And done almost all functions for it including uarts, sd, USB etc. however, I am confused getting ADC … --- ## [What is xbee s2c 802.15.4 ADC range](https://forums.digi.com/t/what-is-xbee-s2c-802-15-4-adc-range/23221)
**Author:** [@bastien](https://forums.digi.com/u/bastien)\ **Replies:** 5\ **Last updated:** [September 7, 2022, 10:46am UTC](https://forums.digi.com/t/what-is-xbee-s2c-802-15-4-adc-range/23221 "2022-09-07T10:46:04Z")
Hi I have xbees s2c 802.15.4 (XB24CAPIT-001) I have now issues reading ADC, and I suspect that the range I assumed (0 to 3.3V) is actually less (1.2V ?) I have been looking at the doc and I have found: The user manu… --- ## [What do my printed ADC values from my moisture sensor really mean?](https://forums.digi.com/t/what-do-my-printed-adc-values-from-my-moisture-sensor-really-mean/21558)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 4\ **Last updated:** [July 15, 2020, 1:27pm UTC](https://forums.digi.com/t/what-do-my-printed-adc-values-from-my-moisture-sensor-really-mean/21558 "2020-07-15T13:27:29Z")
Ok so here are my brief setup details: xbee coordinator communicating with xbee remote router module both in API mode. I have a YL-69 moisture sensor connected to the YL-38 meter. On the YL-38 meter I have pin “D0” conn… --- ## [Analog/digitial ground on XBee SX 868](https://forums.digi.com/t/analog-digitial-ground-on-xbee-sx-868/21420)
**Author:** [@marius\_xbee](https://forums.digi.com/u/marius_xbee)\ **Replies:** 2\ **Last updated:** [June 4, 2020, 9:32am UTC](https://forums.digi.com/t/analog-digitial-ground-on-xbee-sx-868/21420 "2020-06-04T09:32:39Z")
Hello, does anybody know if there is a seperate analog ground PIN on the XBee SX 868 module? Or are these two grounds (digital and analog) tight together on the same PINs? What is the total accuracy of the 4 ADCs? I m… --- ## [SX 868 ADC with PT1000](https://forums.digi.com/t/sx-868-adc-with-pt1000/21107)
**Author:** [@marius\_xbee](https://forums.digi.com/u/marius_xbee)\ **Replies:** 7\ **Last updated:** [May 7, 2020, 1:57pm UTC](https://forums.digi.com/t/sx-868-adc-with-pt1000/21107 "2020-05-07T13:57:00Z")
Hello, has anybody successfully read out a PT100 or PT1000 temperature sensor on a XBee ADC yet? There is a 12-Bit ADC on the Cortex M3 µC, the XBee has only a 10-Bit ADC at 4 PINs, so the resolution would be 1.25V/1023… --- ## [Xbee S2C Zigbee freezes and module stop receiving ADC Samples](https://forums.digi.com/t/xbee-s2c-zigbee-freezes-and-module-stop-receiving-adc-samples/21308)
**Author:** [@danielaid](https://forums.digi.com/u/danielaid)\ **Replies:** 16\ **Last updated:** [April 30, 2020, 1:35pm UTC](https://forums.digi.com/t/xbee-s2c-zigbee-freezes-and-module-stop-receiving-adc-samples/21308 "2020-04-30T13:35:44Z")
I’m using modules Xbee S2C PRO Zigbee to make a wireless sensor network, it is already with a newest firmware version (4061). The end-device module is measuring temperature through ADC Reads. It has IR selected on a grea… --- ## [Where is this file examples/io/RemoteADCSample?](https://forums.digi.com/t/where-is-this-file-examples-io-remoteadcsample/20909)
**Author:** [@adarsh](https://forums.digi.com/u/adarsh)\ **Replies:** 1\ **Last updated:** [November 19, 2019, 11:14am UTC](https://forums.digi.com/t/where-is-this-file-examples-io-remoteadcsample/20909 "2019-11-19T11:14:17Z")
While reading how to use the digi-xbee library, i was reading how to get analog data from remote modules. It mentions the following lines several times: You can locate the example in the following path: examples/io/Rem… --- ## [Incorret ADC read from Xbee3 micropython](https://forums.digi.com/t/incorret-adc-read-from-xbee3-micropython/20771)
**Author:** [@Teos81](https://forums.digi.com/u/Teos81)\ **Replies:** 0\ **Last updated:** [September 18, 2019, 3:05pm UTC](https://forums.digi.com/t/incorret-adc-read-from-xbee3-micropython/20771 "2019-09-18T15:05:45Z")
Hi, i have a strange problem using the Xbee3 embedded micropython and ADC read. I have the pin D0 configured as ADC with vref set to vcc. If i read the acd value via transparent mode, i get a good value; if a make a r… --- ## [Read supply voltage of remote device](https://forums.digi.com/t/read-supply-voltage-of-remote-device/20706)
**Author:** [@MariusS](https://forums.digi.com/u/MariusS)\ **Replies:** 0\ **Last updated:** [August 15, 2019, 10:18am UTC](https://forums.digi.com/t/read-supply-voltage-of-remote-device/20706 "2019-08-15T10:18:01Z")
Hello, i want to ask, how is it possible to read the right board supply voltage of a remote xbee device with python. The supply voltage read with %V is 0,02 V above the right supply voltage at the VCC pin of the module… --- ## [BL4S210 poor counts per Volt on AIn](https://forums.digi.com/t/bl4s210-poor-counts-per-volt-on-ain/20563)
**Author:** [@wvmstr](https://forums.digi.com/u/wvmstr)\ **Replies:** 1\ **Last updated:** [June 14, 2019, 3:31pm UTC](https://forums.digi.com/t/bl4s210-poor-counts-per-volt-on-ain/20563 "2019-06-14T15:31:44Z")
We recently upgraded from BL2100 to BL4S210, due to poor availability issues with the former. Now we are wondering if we made a mistake, because if appears the whole 2048 raw value span is not available. In fact we only… --- ## [XBC-M5-UT-001 ADC 2.5V internal voltage reference accuracy](https://forums.digi.com/t/xbc-m5-ut-001-adc-2-5v-internal-voltage-reference-accuracy/20272)
**Author:** [@jcalderon](https://forums.digi.com/u/jcalderon)\ **Replies:** 0\ **Last updated:** [February 20, 2019, 3:40pm UTC](https://forums.digi.com/t/xbc-m5-ut-001-adc-2-5v-internal-voltage-reference-accuracy/20272 "2019-02-20T15:40:42Z")
What is the accuracy of the 2.5V internal voltage reference for the Analog to Digital Converter for the XBC-M5-UT-001 (3G Xbee Cellular). --- ## [Programmable S2C : ADC drifts with temperature?](https://forums.digi.com/t/programmable-s2c-adc-drifts-with-temperature/20235)
**Author:** [@BMeekers](https://forums.digi.com/u/BMeekers)\ **Replies:** 0\ **Last updated:** [February 6, 2019, 12:18pm UTC](https://forums.digi.com/t/programmable-s2c-adc-drifts-with-temperature/20235 "2019-02-06T12:18:36Z")
Using the programmable xbee with an NTC thermistor attached to input AD2. Measures correctly when electronics is at room temperature and varying NTC temp in oil bath. Tested with a fixed 3k48/15k resistor and used cold … --- ## [Which python example receives ADC samples sent by remote XBee?](https://forums.digi.com/t/which-python-example-receives-adc-samples-sent-by-remote-xbee/19998)
**Author:** [@squarej](https://forums.digi.com/u/squarej)\ **Replies:** 0\ **Last updated:** [November 2, 2018, 6:03pm UTC](https://forums.digi.com/t/which-python-example-receives-adc-samples-sent-by-remote-xbee/19998 "2018-11-02T18:03:26Z")
I am using a pair of 900HP modules. The remote is configured for async cyclic sleep and sends ADC samples every 5 seconds. Which python sample will capture that incoming information and print it for example? I have ha… --- ## [Is there a way to configure the ADC of an XBee module?](https://forums.digi.com/t/is-there-a-way-to-configure-the-adc-of-an-xbee-module/19732)
**Author:** [@cory.mosiman12](https://forums.digi.com/u/cory.mosiman12)\ **Replies:** 0\ **Last updated:** [July 19, 2018, 12:20pm UTC](https://forums.digi.com/t/is-there-a-way-to-configure-the-adc-of-an-xbee-module/19732 "2018-07-19T12:20:08Z")
I have multiple XBee s1 modules connected to a USB explorer acting as a SENDER, and a single XBee s1 module acting as the RECEIVER. The SENDER’s are all reading in both digital and analog inputs from their pins, and I w… --- ## [How to get remote Xbee's ADC values in Transparent mode (both) ?(Xbee S2C)](https://forums.digi.com/t/how-to-get-remote-xbees-adc-values-in-transparent-mode-both-xbee-s2c/19492)
**Author:** [@Hitheshkaranth](https://forums.digi.com/u/Hitheshkaranth)\ **Replies:** 11\ **Last updated:** [June 26, 2018, 12:05pm UTC](https://forums.digi.com/t/how-to-get-remote-xbees-adc-values-in-transparent-mode-both-xbee-s2c/19492 "2018-06-26T12:05:07Z")
Greetings, I’m fairly new to these topic and want to know more. I have been using Xbee S2C module in transparent mode and has been successful in transfering via UART from both ends. Now that I have acheived that I want… --- ## [\[Solved\]:I'm unable to read accurate ADC values (I can't think of anything else to do)](https://forums.digi.com/t/solved-im-unable-to-read-accurate-adc-values-i-cant-think-of-anything-else-to-do/19383)
**Author:** [@sruedat](https://forums.digi.com/u/sruedat)\ **Replies:** 2\ **Last updated:** [April 17, 2018, 6:47am UTC](https://forums.digi.com/t/solved-im-unable-to-read-accurate-adc-values-i-cant-think-of-anything-else-to-do/19383 "2018-04-17T06:47:10Z")
Hi everybody, I’m trying to read analog voltages with an XBee S2C TH from different kind of temp sensor, and the values obtained by the ADC are inaccurate (a small shift of 20-30 ma appears) and they are very oscillatin… --- ## [Doubts regarding sensor input to Xbee](https://forums.digi.com/t/doubts-regarding-sensor-input-to-xbee/19350)
**Author:** [@kavic](https://forums.digi.com/u/kavic)\ **Replies:** 0\ **Last updated:** [March 30, 2018, 3:28pm UTC](https://forums.digi.com/t/doubts-regarding-sensor-input-to-xbee/19350 "2018-03-30T15:28:21Z")
If we give level shifted sinusoid to the ADC pin of the transmitter Xbee, how to check what reaches the receiver Xbee? --- ## [Xbee s2c read ADC wrong values](https://forums.digi.com/t/xbee-s2c-read-adc-wrong-values/19261)
**Author:** [@sruedat](https://forums.digi.com/u/sruedat)\ **Replies:** 0\ **Last updated:** [March 5, 2018, 1:15pm UTC](https://forums.digi.com/t/xbee-s2c-read-adc-wrong-values/19261 "2018-03-05T13:15:58Z")
Hi, I’m trying to do my first test with XBee Zigbee Mesh Kit.(XB24c Family,Due I want to do a temperature sensors network). My first test consist in a coordinator node and an end device node connecting by mean of Xbee … --- ## [ADC wrong value on IS command](https://forums.digi.com/t/adc-wrong-value-on-is-command/18930)
**Author:** [@braghettos](https://forums.digi.com/u/braghettos)\ **Replies:** 3\ **Last updated:** [November 30, 2017, 4:22pm UTC](https://forums.digi.com/t/adc-wrong-value-on-is-command/18930 "2017-11-30T16:22:10Z")
Hi everyone, issuing an IS command on an XBEE that: is connected to VIN (5V) and GND has D1 set as a digital output low, connected to nothing has D2 set as an ADC, connected to nothing This is the result I got: Remo… --- ## [Iam getting default 'except:' must be last how can i fix the error and give me the necode the explanation?](https://forums.digi.com/t/iam-getting-default-except-must-be-last-how-can-i-fix-the-error-and-give-me-the-necode-the-explanation/18811)
**Author:** [@SShankaR135](https://forums.digi.com/u/SShankaR135)\ **Replies:** 0\ **Last updated:** [October 20, 2017, 1:04pm UTC](https://forums.digi.com/t/iam-getting-default-except-must-be-last-how-can-i-fix-the-error-and-give-me-the-necode-the-explanation/18811 "2017-10-20T13:04:04Z")
class SIException(Exception): def init(self,length,atleast): Exception.init(self) self.length=length self.atleast=atleast try: s=input(“Enter something:”) if len(s)\<3: raise SIException(len(s),3) except: print(… --- ## [Programmable S2C : ADC not accurate](https://forums.digi.com/t/programmable-s2c-adc-not-accurate/18790)
**Author:** [@Mark\_Kestens](https://forums.digi.com/u/Mark_Kestens)\ **Replies:** 6\ **Last updated:** [October 13, 2017, 10:42am UTC](https://forums.digi.com/t/programmable-s2c-adc-not-accurate/18790 "2017-10-13T10:42:29Z")
Programmable S2C TH : stabile vref 2500 at pin 14 / hardware circuit with precission resistances 7k5 and 15k that give us voltages at pin 17/18/20. The resistance-measurements (avg of 10 adc-measurements) : 7k5 : 738… --- ## [XBee ADC is always 03FF](https://forums.digi.com/t/xbee-adc-is-always-03ff/18460)
**Author:** [@halahmadi](https://forums.digi.com/u/halahmadi)\ **Replies:** 2\ **Last updated:** [June 21, 2017, 10:12am UTC](https://forums.digi.com/t/xbee-adc-is-always-03ff/18460 "2017-06-21T10:12:06Z")
Hello, I am using XBee 1 and trying to send an analog value. I have DIO4 set to ADC and ranged the input from 0 to 3 V. The received analog value is always 0x03FF (1023). Can you help to figure out why this is happening… --- ## [Xbee unable to change IOMode of DIO3\_AD3 to ADC for remote analog](https://forums.digi.com/t/xbee-unable-to-change-iomode-of-dio3-ad3-to-adc-for-remote-analog/18377)
**Author:** [@rmus](https://forums.digi.com/u/rmus)\ **Replies:** 11\ **Last updated:** [June 20, 2017, 10:07am UTC](https://forums.digi.com/t/xbee-unable-to-change-iomode-of-dio3-ad3-to-adc-for-remote-analog/18377 "2017-06-20T10:07:25Z")
Hi guys, I am currently have 2 XBee-PRO 900HP modules with the Grove Development Boards. I’m using one as a base, connected via a USB cable to my laptop and one that is powered by batteries with a voltage stabilizer giv… --- ## [Im Using an XBEE Zigbee S1 module and When I input Vref of 2.5V into Pin 14 the pin clamps the Vref to 1.44 Volts?](https://forums.digi.com/t/im-using-an-xbee-zigbee-s1-module-and-when-i-input-vref-of-2-5v-into-pin-14-the-pin-clamps-the-vref-to-1-44-volts/13696)
**Author:** [@mladenik](https://forums.digi.com/u/mladenik)\ **Replies:** 5\ **Last updated:** [May 8, 2017, 10:40am UTC](https://forums.digi.com/t/im-using-an-xbee-zigbee-s1-module-and-when-i-input-vref-of-2-5v-into-pin-14-the-pin-clamps-the-vref-to-1-44-volts/13696 "2017-05-08T10:40:19Z")
--- ## [ConnectCore for i.MX6UL MCA ADC channel assignment](https://forums.digi.com/t/connectcore-for-i-mx6ul-mca-adc-channel-assignment/18097)
**Author:** [@cgamboni](https://forums.digi.com/u/cgamboni)\ **Replies:** 2\ **Last updated:** [March 8, 2017, 1:48pm UTC](https://forums.digi.com/t/connectcore-for-i-mx6ul-mca-adc-channel-assignment/18097 "2017-03-08T13:48:25Z")
I apologize for the silly question if I have overlooked something but I am looking for documentation outlining the MCA\_IO pin number to the cciMX6ULsbc ADC channel number. I see that in dey 2.0-r5 support was added for … --- ## [Incorrect XBee S2C ADC Reading for 0 voltage](https://forums.digi.com/t/incorrect-xbee-s2c-adc-reading-for-0-voltage/17993)
**Author:** [@kushal992](https://forums.digi.com/u/kushal992)\ **Replies:** 3\ **Last updated:** [February 13, 2017, 9:10am UTC](https://forums.digi.com/t/incorrect-xbee-s2c-adc-reading-for-0-voltage/17993 "2017-02-13T09:10:21Z")
I’m using a XBee S2C module to make a wireless joystick controller. I have successfully setup the module in End Device AT mode which reads ADC values from the joystick module and sends it to the coordinator XBee module, … --- ## [Using Uart to Output Analog Input](https://forums.digi.com/t/using-uart-to-output-analog-input/15699)
**Author:** [@CarloBenussi](https://forums.digi.com/u/CarloBenussi)\ **Replies:** 1\ **Last updated:** [November 30, 2015, 1:26pm UTC](https://forums.digi.com/t/using-uart-to-output-analog-input/15699 "2015-11-30T13:26:21Z")
Hello, I would like to use the Xbee S1 board to read an analog voltage (so using the ADC) and send it out to a board (STM32) through the USART interface. All would be done using one Xbee module It is possible? --- ## [XBee S2C ADC Problem](https://forums.digi.com/t/xbee-s2c-adc-problem/15659)
**Author:** [@AndyDale](https://forums.digi.com/u/AndyDale)\ **Replies:** 10\ **Last updated:** [November 9, 2015, 9:12am UTC](https://forums.digi.com/t/xbee-s2c-adc-problem/15659 "2015-11-09T09:12:02Z")
I have the new XBee S2C RP-SMA and I’m wanting to accurately and remotely read the ambient temperature so I’ve connected up an MCP9700A Linear Active Thermistor to the XBee S2C ADC port. I needed to calibrate the system… --- ## [Problems using XBee S2C ADC Channels](https://forums.digi.com/t/problems-using-xbee-s2c-adc-channels/15636)
**Author:** [@AndyDale](https://forums.digi.com/u/AndyDale)\ **Replies:** 4\ **Last updated:** [October 27, 2015, 9:34am UTC](https://forums.digi.com/t/problems-using-xbee-s2c-adc-channels/15636 "2015-10-27T09:34:45Z")
I’m having problems using XBee S2C ADC Channels? I’m trying to make sense of the results I’m getting from my ADC when measuring voltage. The documentation suggests using the formula found on page 131 of the XBee / XBee… --- ## [How one can run real-time linux in ConnectCard Wi-iMX28?](https://forums.digi.com/t/how-one-can-run-real-time-linux-in-connectcard-wi-imx28/15166)
**Author:** [@areis](https://forums.digi.com/u/areis)\ **Replies:** 2\ **Last updated:** [July 26, 2015, 5:47pm UTC](https://forums.digi.com/t/how-one-can-run-real-time-linux-in-connectcard-wi-imx28/15166 "2015-07-26T17:47:50Z")
In this requirement the iMX28 module must read an ADC through its SPI interface at 1k sample/s and must assure to complete in at most a second. I’m not sure that spi.h interface will allow this to happen due almost any c… [Next page](https://forums.digi.com/tag/adc/267.md?match_all_tags=true&page=1&tags%5B%5D=adc)