# \#analog-read

**URL:** https://forums.digi.com/tag/analog-read/583.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [Analog/digitial ground on XBee SX 868](https://forums.digi.com/t/analog-digitial-ground-on-xbee-sx-868/21420)

<div class="topic-metadata">

**Author:** [@marius\_xbee](https://forums.digi.com/u/marius_xbee)\
**Replies:** 2\
**Last updated:** [June 4, 2020, 9:32am UTC](https://forums.digi.com/t/analog-digitial-ground-on-xbee-sx-868/21420 "2020-06-04T09:32:39Z")

</div>

Hello, does anybody know if there is a seperate analog ground PIN on the XBee SX 868 module? Or are these two grounds (digital and analog) tight together on the same PINs? What is the total accuracy of the 4 ADCs? I m…

---

## [Wiring Example XB-PRO SX 4-20mA Analog Input](https://forums.digi.com/t/wiring-example-xb-pro-sx-4-20ma-analog-input/20924)

<div class="topic-metadata">

**Author:** [@willpoll](https://forums.digi.com/u/willpoll)\
**Replies:** 3\
**Last updated:** [November 25, 2019, 8:50am UTC](https://forums.digi.com/t/wiring-example-xb-pro-sx-4-20ma-analog-input/20924 "2019-11-25T08:50:27Z")

</div>

Is there an actual wiring diagram available for the XBee-PRO SX Analog/Digital RF Modem? Specifically for wiring current loop inputs to A1 - A4, I am unable to get expected result. Thanks!

---

## [How to read 2 analog input from xbee in python at a same time?](https://forums.digi.com/t/how-to-read-2-analog-input-from-xbee-in-python-at-a-same-time/20004)

<div class="topic-metadata">

**Author:** [@dkafley](https://forums.digi.com/u/dkafley)\
**Replies:** 0\
**Last updated:** [November 12, 2018, 12:20pm UTC](https://forums.digi.com/t/how-to-read-2-analog-input-from-xbee-in-python-at-a-same-time/20004 "2018-11-12T12:20:51Z")

</div>

Hi, I am using 4 XBee series 2 for my project 1 is coordinator & rest 3 are routers. Now I have a problem with reading 2 analog input at the same time in python. I have been using temperature & gas sensors at the same ti…

---

## [XBee + TMP36 temperature sensor - returning inaccurate values](https://forums.digi.com/t/xbee-tmp36-temperature-sensor-returning-inaccurate-values/12221)

<div class="topic-metadata">

**Author:** [@Fistameeny](https://forums.digi.com/u/Fistameeny)\
**Replies:** 10\
**Last updated:** [June 5, 2018, 9:28am UTC](https://forums.digi.com/t/xbee-tmp36-temperature-sensor-returning-inaccurate-values/12221 "2018-06-05T09:28:01Z")

</div>

I have rigged up a basic circuit as follows: Fritzing image The XBee is a Pro, series 2. It is configured as a Router using the AT firmware. Pin 20 (D0) is configured as an analog input. There is a co-ordinator XBee ru…

---

## [Aquire Analog XBeeS1-Transmitt - Read Value via XBeeS1 on UNO](https://forums.digi.com/t/aquire-analog-xbees1-transmitt-read-value-via-xbees1-on-uno/18886)

<div class="topic-metadata">

**Author:** [@Mogaraghu](https://forums.digi.com/u/Mogaraghu)\
**Replies:** 2\
**Last updated:** [November 10, 2017, 1:27pm UTC](https://forums.digi.com/t/aquire-analog-xbees1-transmitt-read-value-via-xbees1-on-uno/18886 "2017-11-10T13:27:34Z")

</div>

I just bought 3 nos XBee S1 modules. Read all the tutorials on this site / YouTube etc. Established a basic chat between two XBees. I am looking for a link to a tutorial where in I can read Two analog values in a stan…

---

## [Analog value not changing on local device](https://forums.digi.com/t/analog-value-not-changing-on-local-device/18152)

<div class="topic-metadata">

**Author:** [@albe](https://forums.digi.com/u/albe)\
**Replies:** 3\
**Last updated:** [March 20, 2017, 3:42pm UTC](https://forums.digi.com/t/analog-value-not-changing-on-local-device/18152 "2017-03-20T15:42:31Z")

</div>

Hi, We are reading AD1 off local xbee (S2C - through hole) setup as coordinator using API AP =1 AO = 0 AD1 = 2 PR = 80 PD = 0 IR = 1770 (set to send samples). We get constant values from AD1 range of 518-520. Even when…

---

## [In connectcore6 sbc, how to read analog input in Yocto 1.6.8](https://forums.digi.com/t/in-connectcore6-sbc-how-to-read-analog-input-in-yocto-1-6-8/16229)

<div class="topic-metadata">

**Author:** [@jegan](https://forums.digi.com/u/jegan)\
**Replies:** 1\
**Last updated:** [February 11, 2016, 3:57pm UTC](https://forums.digi.com/t/in-connectcore6-sbc-how-to-read-analog-input-in-yocto-1-6-8/16229 "2016-02-11T15:57:27Z")

</div>

---

## [constant analog sample values for varying sensor values](https://forums.digi.com/t/constant-analog-sample-values-for-varying-sensor-values/16116)

<div class="topic-metadata">

**Author:** [@kahoko](https://forums.digi.com/u/kahoko)\
**Replies:** 5\
**Last updated:** [January 22, 2016, 10:48pm UTC](https://forums.digi.com/t/constant-analog-sample-values-for-varying-sensor-values/16116 "2016-01-22T22:48:11Z")

</div>

In a project I am doing, I have to send analog readings of a soil moisture sensor through zigbee. I have connected the sensor Vcc to 5v and ground; the zigbee Vcc to 3.3v and ground. The analog pin of sensor to Txx pin o…

---

## [XBee S1 - cannot read values from analog sensor, configuration problem](https://forums.digi.com/t/xbee-s1-cannot-read-values-from-analog-sensor-configuration-problem/15925)

<div class="topic-metadata">

**Author:** [@tripleG](https://forums.digi.com/u/tripleG)\
**Replies:** 4\
**Last updated:** [December 14, 2015, 3:29pm UTC](https://forums.digi.com/t/xbee-s1-cannot-read-values-from-analog-sensor-configuration-problem/15925 "2015-12-14T15:29:49Z")

</div>

Thank you for your reply. I configured the IO lines and I receive data. However, the information that I receive is completly false- it consists of 14 bits and the characters that I recceive are illisible(I get a sequenc…

---

## [How to read two analog inputs from XBee series 2?](https://forums.digi.com/t/how-to-read-two-analog-inputs-from-xbee-series-2/13802)

<div class="topic-metadata">

**Author:** [@Ferrerovi](https://forums.digi.com/u/Ferrerovi)\
**Replies:** 6\
**Last updated:** [June 23, 2015, 10:37am UTC](https://forums.digi.com/t/how-to-read-two-analog-inputs-from-xbee-series-2/13802 "2015-06-23T10:37:24Z")

</div>

I would like to know how I can control the data from two analog in put in my XBee Series 2. I have a sensor that sends data using a LDR (AD0) and a LM35(AD2) temperature sensor. I do not know how can I get the correct an…

---

## [Problem with Xbee pro series 2 and DHT11 temperature sensor](https://forums.digi.com/t/problem-with-xbee-pro-series-2-and-dht11-temperature-sensor/13937)

<div class="topic-metadata">

**Author:** [@Marek.SVK](https://forums.digi.com/u/Marek.SVK)\
**Replies:** 2\
**Last updated:** [November 18, 2014, 4:28pm UTC](https://forums.digi.com/t/problem-with-xbee-pro-series-2-and-dht11-temperature-sensor/13937 "2014-11-18T16:28:42Z")

</div>

Hi to all. I really need your help. I will go throught all my steps which was done. First of all, I would like to do the project with temperature sensor- classic project. However, here started my problems. Firstly, I’ve …

---

## [XBee temperature sensor problem](https://forums.digi.com/t/xbee-temperature-sensor-problem/13804)

<div class="topic-metadata">

**Author:** [@Ferrerovi](https://forums.digi.com/u/Ferrerovi)\
**Replies:** 1\
**Last updated:** [October 29, 2014, 2:14pm UTC](https://forums.digi.com/t/xbee-temperature-sensor-problem/13804 "2014-10-29T14:14:29Z")

</div>

I would like to know how to read correctly data from XBee analog input (AD0) where I have and LM35. I show the results in a GLCD but they are wrong. I think I am not reading correctly the data. This is the loop code: v…

---

## [How do I read values using remote AT commands](https://forums.digi.com/t/how-do-i-read-values-using-remote-at-commands/12939)

<div class="topic-metadata">

**Author:** [@Alisson\_Oliveira](https://forums.digi.com/u/Alisson_Oliveira)\
**Replies:** 6\
**Last updated:** [May 15, 2014, 10:43am UTC](https://forums.digi.com/t/how-do-i-read-values-using-remote-at-commands/12939 "2014-05-15T10:43:16Z")

</div>

How do I read analog ports Xbee S6 with frame type 0x07? Example: I want to read the voltage applied to pin 20 (D0) of Xbee. The ip on the network it is 192.168.25.90. How would the frame?

---

## [LP3500 Analog Calibration](https://forums.digi.com/t/lp3500-analog-calibration/12128)

<div class="topic-metadata">

**Author:** [@JJEsp08](https://forums.digi.com/u/JJEsp08)\
**Replies:** 1\
**Last updated:** [November 11, 2013, 6:11pm UTC](https://forums.digi.com/t/lp3500-analog-calibration/12128 "2013-11-11T18:11:14Z")

</div>

Hello and good day. I’m using an LP3500 kit to read a signal from a sensor. The signal is amplified using the internal PGA; so the normal behavior should be that at a low voltage (generally 0 volts) returns 0 bits on t…

---

## [Its possible to use more then one analogig sensor in one XBee module?](https://forums.digi.com/t/its-possible-to-use-more-then-one-analogig-sensor-in-one-xbee-module/11995)

<div class="topic-metadata">

**Author:** [@Vrgds](https://forums.digi.com/u/Vrgds)\
**Replies:** 1\
**Last updated:** [September 30, 2013, 5:49am UTC](https://forums.digi.com/t/its-possible-to-use-more-then-one-analogig-sensor-in-one-xbee-module/11995 "2013-09-30T05:49:02Z")

</div>

Its possible to use more then one analogig sensor in one XBee module? For instance, one temperature sensor in AD0 and one LDR sensor in AD1? I already tried but the package with the data seems to have only the AD0 value…

---

## [Analog input hiccup](https://forums.digi.com/t/analog-input-hiccup/11648)

<div class="topic-metadata">

**Author:** [@snouwakpo](https://forums.digi.com/u/snouwakpo)\
**Replies:** 4\
**Last updated:** [July 1, 2013, 8:14am UTC](https://forums.digi.com/t/analog-input-hiccup/11648 "2013-07-01T08:14:36Z")

</div>

My network: I need to collect analog readings at about 5Hz on remote end devices for maybe 10 min and then put them into energy saving mode. Essentially, I am trying to have the end devices go into sleep mode when I am …
