# \#api **URL:** https://forums.digi.com/tag/api/26.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Problem configuring XBEE 2 API Coordinator without XCTU](https://forums.digi.com/t/problem-configuring-xbee-2-api-coordinator-without-xctu/13288)
**Author:** [@devWarrior](https://forums.digi.com/u/devWarrior)\ **Replies:** 6\ **Last updated:** [August 18, 2014, 2:13pm UTC](https://forums.digi.com/t/problem-configuring-xbee-2-api-coordinator-without-xctu/13288 "2014-08-18T14:13:16Z")
I am having my microcontroller configure my Xbee series 2 as an API coordinator. When I write the PAN ID, it writes the 0x08 AT command like this: 0x7E //start byte 0x00 0x06 //6 bytes long 0x08 //AT command 0x00 /… --- ## [Read in and save API packets via python](https://forums.digi.com/t/read-in-and-save-api-packets-via-python/31478)
**Author:** [@lukeod](https://forums.digi.com/u/lukeod)\ **Replies:** 5\ **Last updated:** [June 30, 2024, 7:06pm UTC](https://forums.digi.com/t/read-in-and-save-api-packets-via-python/31478 "2024-06-30T19:06:55Z")
Hi I have two digi xbee 3s. One a coordinator, connected to laptop via USB and the second set up as a remote sensor - it has a potentiometer on it and sends to value to the coordinator. They can communicate via 2.4GHz R… --- ## [Socket Bind/Listen API Frame just won't provide any response](https://forums.digi.com/t/socket-bind-listen-api-frame-just-wont-provide-any-response/30842)
**Author:** [@macroniom](https://forums.digi.com/u/macroniom)\ **Replies:** 1\ **Last updated:** [May 9, 2024, 12:17pm UTC](https://forums.digi.com/t/socket-bind-listen-api-frame-just-wont-provide-any-response/30842 "2024-05-09T12:17:33Z")
I have a Digi XBee 3 Cellular Module that I am trying to get to create a socket, and then bind a port with that socket. I was trying to follow this tutorial, and upon creating the socket, I get a “Socket Created Successf… --- ## [Full Duplex SPI on XBee modules](https://forums.digi.com/t/full-duplex-spi-on-xbee-modules/21161)
**Author:** [@John\_Adriaan](https://forums.digi.com/u/John_Adriaan)\ **Replies:** 2\ **Last updated:** [February 6, 2024, 3:01pm UTC](https://forums.digi.com/t/full-duplex-spi-on-xbee-modules/21161 "2024-02-06T15:01:36Z")
All of my experience with SPI to date has been effectively half-duplex: the Master sends the known-size command (ignoring the data received from the Slave), then when it receives an interrupt from the Slave it re-starts … --- ## [Xbee S2C Issues](https://forums.digi.com/t/xbee-s2c-issues/23278)
**Author:** [@berkayapali](https://forums.digi.com/u/berkayapali)\ **Replies:** 5\ **Last updated:** [November 11, 2022, 10:37am UTC](https://forums.digi.com/t/xbee-s2c-issues/23278 "2022-11-11T10:37:20Z")
Hello all, I have Xbee S2C and I am having an issue with these xbees. I am trying to run these xbees on arduino in API mode but I can not. The point is that the arduino code is the code that I could run in arduino six m… --- ## [How can I change my xbee setup for AP = 0 from API mode (AP = 1 or AP =2) by using digi module in python ?](https://forums.digi.com/t/how-can-i-change-my-xbee-setup-for-ap-0-from-api-mode-ap-1-or-ap-2-by-using-digi-module-in-python/23168)
**Author:** [@Kyle\_case](https://forums.digi.com/u/Kyle_case)\ **Replies:** 4\ **Last updated:** [July 26, 2022, 3:30pm UTC](https://forums.digi.com/t/how-can-i-change-my-xbee-setup-for-ap-0-from-api-mode-ap-1-or-ap-2-by-using-digi-module-in-python/23168 "2022-07-26T15:30:54Z")
I am using XBee PRO S3B for wireless radio communication. Currently I am configuring it by XCTU, however, sometimes I need to reset or re configure with non graphical interface. Using digi module with python seemed goo… --- ## [Using Xbee in API mode](https://forums.digi.com/t/using-xbee-in-api-mode/23021)
**Author:** [@berkayapali](https://forums.digi.com/u/berkayapali)\ **Replies:** 1\ **Last updated:** [April 1, 2022, 10:29am UTC](https://forums.digi.com/t/using-xbee-in-api-mode/23021 "2022-04-01T10:29:40Z")
Hello, I am having an issue about my Xbees. I want to communicate 3 Xbee in API mode but in a special way. What I mean is that every xbee has to communicate only one xbee and while 2 Xbee have same PAN ID the other one … --- ## [Why is my ConnectionStatus works but the Connect and Disconnect not?](https://forums.digi.com/t/why-is-my-connectionstatus-works-but-the-connect-and-disconnect-not/22936)
**Author:** [@tamadi](https://forums.digi.com/u/tamadi)\ **Replies:** 0\ **Last updated:** [February 3, 2022, 9:44am UTC](https://forums.digi.com/t/why-is-my-connectionstatus-works-but-the-connect-and-disconnect-not/22936 "2022-02-03T09:44:23Z")
Greatings! I have a problem with using the AwUsbApi. I tried to create a c# windows form app where i can control the AnywhereUsb/14. I use the v3.99.350 dll provided by the driver. I was able to use the ConnectionStatus … --- ## [Determining the product family through an AT command request](https://forums.digi.com/t/determining-the-product-family-through-an-at-command-request/14893)
**Author:** [@jon1544](https://forums.digi.com/u/jon1544)\ **Replies:** 2\ **Last updated:** [September 13, 2021, 3:51pm UTC](https://forums.digi.com/t/determining-the-product-family-through-an-at-command-request/14893 "2021-09-13T15:51:56Z")
When I open a XBee device in XCTU, it displays a product family string in the firmware information (such as XBP24BZ7). I am wondering if there is a way to query the XBee using an AT command request to obtain the product … --- ## [Sending API frame to control light](https://forums.digi.com/t/sending-api-frame-to-control-light/22327)
**Author:** [@Mohamad-Badr](https://forums.digi.com/u/Mohamad-Badr)\ **Replies:** 2\ **Last updated:** [April 7, 2021, 8:39am UTC](https://forums.digi.com/t/sending-api-frame-to-control-light/22327 "2021-04-07T08:39:52Z")
Hello, I have the xbee3 module connect to light in the Zigbee network and I am trying to send a frame to change the status of the light, I determined the des. address and the frame type “0x11” and in the Data payload I … --- ## [XBee 3s routers not joining coordinator, not all seeing each other](https://forums.digi.com/t/xbee-3s-routers-not-joining-coordinator-not-all-seeing-each-other/22251)
**Author:** [@RguStudent](https://forums.digi.com/u/RguStudent)\ **Replies:** 1\ **Last updated:** [March 3, 2021, 8:10am UTC](https://forums.digi.com/t/xbee-3s-routers-not-joining-coordinator-not-all-seeing-each-other/22251 "2021-03-03T08:10:03Z")
I am at a loss with my XBee 3s and XCTU. I have 5 XBee3s, one set up as a coordinator, the other 4 are routers They were created from clean, i.e. reset to default Only changes were PAN ID is 8088 Scan Channels for a… --- ## [Can we use (read & write) the characteristics request & response of XBee API BLE Service directly?](https://forums.digi.com/t/can-we-use-read-write-the-characteristics-request-response-of-xbee-api-ble-service-directly/22239)
**Author:** [@Manel\_LOUATI](https://forums.digi.com/u/Manel_LOUATI)\ **Replies:** 3\ **Last updated:** [March 1, 2021, 7:56am UTC](https://forums.digi.com/t/can-we-use-read-write-the-characteristics-request-response-of-xbee-api-ble-service-directly/22239 "2021-03-01T07:56:41Z")
--- ## [How can I set the remote XBEE3 to Transparent mode using an API packet then save it to non volatile memory?](https://forums.digi.com/t/how-can-i-set-the-remote-xbee3-to-transparent-mode-using-an-api-packet-then-save-it-to-non-volatile-memory/21894)
**Author:** [@Bruce\_Mc](https://forums.digi.com/u/Bruce_Mc)\ **Replies:** 3\ **Last updated:** [October 16, 2020, 7:16am UTC](https://forums.digi.com/t/how-can-i-set-the-remote-xbee3-to-transparent-mode-using-an-api-packet-then-save-it-to-non-volatile-memory/21894 "2020-10-16T07:16:49Z")
I want to set up remote XBEE3s remotely. I can set the coordinator and router both to API mode and send API packets to set it up. This works and I can write it to memory. I then need to set the coordinator and remote b… --- ## [What parameter settings for XBP9B running the DP firmare in API mode for several nodes and one repeater](https://forums.digi.com/t/what-parameter-settings-for-xbp9b-running-the-dp-firmare-in-api-mode-for-several-nodes-and-one-repeater/21895)
**Author:** [@Jonathan\_Walther](https://forums.digi.com/u/Jonathan_Walther)\ **Replies:** 1\ **Last updated:** [October 15, 2020, 1:15pm UTC](https://forums.digi.com/t/what-parameter-settings-for-xbp9b-running-the-dp-firmare-in-api-mode-for-several-nodes-and-one-repeater/21895 "2020-10-15T13:15:20Z")
We are using the XBP9B with the DP firmware running in API mode to try to provide communications between a small number of XBee-equipped computers located along a stretch of highway. We would like to use one or more r… --- ## [network ACK failure in API response](https://forums.digi.com/t/network-ack-failure-in-api-response/13515)
**Author:** [@sarathtv2](https://forums.digi.com/u/sarathtv2)\ **Replies:** 3\ **Last updated:** [September 8, 2020, 8:20am UTC](https://forums.digi.com/t/network-ack-failure-in-api-response/13515 "2020-09-08T08:20:27Z")
while trying to communicate with a router node in api mode the controller returns the status with 0x21 corresponding to ntwrk ack failure…can any one shed some light on this…? thanks in advance saratha --- ## [Method to get Wireless IP address from WR11](https://forums.digi.com/t/method-to-get-wireless-ip-address-from-wr11/21566)
**Author:** [@shmorgan](https://forums.digi.com/u/shmorgan)\ **Replies:** 2\ **Last updated:** [August 22, 2020, 8:59pm UTC](https://forums.digi.com/t/method-to-get-wireless-ip-address-from-wr11/21566 "2020-08-22T20:59:50Z")
Is there a method to get Info from the WR11 via an API or some other IP based method to get things like IP address and Data Received/Data Sent. --- ## [Unable to Serial.read() using Arduino and XBee](https://forums.digi.com/t/unable-to-serial-read-using-arduino-and-xbee/21496)
**Author:** [@AntonioGR96](https://forums.digi.com/u/AntonioGR96)\ **Replies:** 1\ **Last updated:** [June 29, 2020, 8:11am UTC](https://forums.digi.com/t/unable-to-serial-read-using-arduino-and-xbee/21496 "2020-06-29T08:11:45Z")
Hi everyone. I am developing a program in which I use an Arduino MEGA and a Wireless Proto Shield with an XBee mounted (API2).In the program I am working on I create a kind of ‘menu’ with different options, which is sho… --- ## [Wrong network address over API](https://forums.digi.com/t/wrong-network-address-over-api/21398)
**Author:** [@Shulyaka](https://forums.digi.com/u/Shulyaka)\ **Replies:** 3\ **Last updated:** [June 1, 2020, 9:57am UTC](https://forums.digi.com/t/wrong-network-address-over-api/21398 "2020-06-01T09:57:41Z")
Hi, I have an XBee3 (fw 100A) as a coordinator for my Zigbee network and a couple of xbees as routers in my network (an S2C fw 4061 and another xbee3 fw 100A). When an end device (xiaomi humidity and temperature sensor)… --- ## [Noob needs simple csharp library example. Not Xamarin](https://forums.digi.com/t/noob-needs-simple-csharp-library-example-not-xamarin/21388)
**Author:** [@jrgert](https://forums.digi.com/u/jrgert)\ **Replies:** 1\ **Last updated:** [May 19, 2020, 2:13pm UTC](https://forums.digi.com/t/noob-needs-simple-csharp-library-example-not-xamarin/21388 "2020-05-19T14:13:13Z")
I am trying to make a C# dialog app that uses the XBeeLibrary.Core. No luck for me. Are there any example apps available that are not xamarin? --- ## [Java ExplicitDataListener stops listening](https://forums.digi.com/t/java-explicitdatalistener-stops-listening/21274)
**Author:** [@wdtj](https://forums.digi.com/u/wdtj)\ **Replies:** 1\ **Last updated:** [April 20, 2020, 7:46am UTC](https://forums.digi.com/t/java-explicitdatalistener-stops-listening/21274 "2020-04-20T07:46:06Z")
I am writing a Java program using the Java API (xbee-java-library-1.3.0.jar) that will connect a XBee2/3 to a SmartThings Hub. I have been following the packet layout listed in https://nzfalco.jimdofree.com/electronic-p… --- ## [Is there a 64 bit version of AwUSBApi.dll?](https://forums.digi.com/t/is-there-a-64-bit-version-of-awusbapi-dll/15951)
**Author:** [@aneves](https://forums.digi.com/u/aneves)\ **Replies:** 9\ **Last updated:** [April 8, 2020, 1:31pm UTC](https://forums.digi.com/t/is-there-a-64-bit-version-of-awusbapi-dll/15951 "2020-04-08T13:31:37Z")
I just installed the 64-bit drivers for the Anywhere USB-2. I was looking in the Advanced folder where all of the api dlls and documentation are. However, the API DLL included with the 64-bit driver appears to be only 32… --- ## [API Explorer](https://forums.digi.com/t/api-explorer/21256)
**Author:** [@Martin91](https://forums.digi.com/u/Martin91)\ **Replies:** 3\ **Last updated:** [April 8, 2020, 8:15am UTC](https://forums.digi.com/t/api-explorer/21256 "2020-04-08T08:15:13Z")
Hi Can i use API Explorer, in the digi manager, to sent data from X4 and sensors to cloud like Thingspeak ? Maybe to write some code like this, in order to get the API key at which we will send the data: Enter Your A… --- ## [Xbee S2 - when ACK in sent?](https://forums.digi.com/t/xbee-s2-when-ack-in-sent/21113)
**Author:** [@Curl](https://forums.digi.com/u/Curl)\ **Replies:** 3\ **Last updated:** [February 13, 2020, 1:42pm UTC](https://forums.digi.com/t/xbee-s2-when-ack-in-sent/21113 "2020-02-13T13:42:10Z")
When operating in API mode, I would like to know when exactly the ACK is sent to the transmitting module. (1) As soon as the incoming packet was received in the buffer or (2) after it was transferred by UART to the des… --- ## [Packetization in API mode (Xbee S2)](https://forums.digi.com/t/packetization-in-api-mode-xbee-s2/21112)
**Author:** [@Curl](https://forums.digi.com/u/Curl)\ **Replies:** 3\ **Last updated:** [February 13, 2020, 1:39pm UTC](https://forums.digi.com/t/packetization-in-api-mode-xbee-s2/21112 "2020-02-13T13:39:14Z")
The packetization rules (entering command mode, 100 bytes in buffer and RO timeout) for Xbee S2 (for example) also apply when operating in API mode? I think that API packets are never splited as long as it does not excee… --- ## [cannot find router's parent address (in API)](https://forums.digi.com/t/cannot-find-routers-parent-address-in-api/11435)
**Author:** [@ln1990](https://forums.digi.com/u/ln1990)\ **Replies:** 6\ **Last updated:** [February 7, 2020, 8:38am UTC](https://forums.digi.com/t/cannot-find-routers-parent-address-in-api/11435 "2020-02-07T08:38:25Z")
hello, i am a student ,i use xbee-pro-S2B.In my project,there is one coordinator and seven router, the router can send data to the coordinator ,i want to find the 16-bit parent address ,but i cannot use the MY command i… --- ## [why M0 parameter is not showing in xctu xbee terminal.](https://forums.digi.com/t/why-m0-parameter-is-not-showing-in-xctu-xbee-terminal/20941)
**Author:** [@Praveen\_Sharma](https://forums.digi.com/u/Praveen_Sharma)\ **Replies:** 1\ **Last updated:** [December 3, 2019, 3:56am UTC](https://forums.digi.com/t/why-m0-parameter-is-not-showing-in-xctu-xbee-terminal/20941 "2019-12-03T03:56:48Z")
To control the duty cycle of the PWM output everywhere in the documentations it is given to use the M0 parameter but in the XCTU terminal we are not getting such option. Also in the P0 parameter we are getting the option… --- ## [AT mode vs API mode](https://forums.digi.com/t/at-mode-vs-api-mode/20713)
**Author:** [@joseph11](https://forums.digi.com/u/joseph11)\ **Replies:** 0\ **Last updated:** [August 21, 2019, 4:11pm UTC](https://forums.digi.com/t/at-mode-vs-api-mode/20713 "2019-08-21T16:11:54Z")
Hi guys, I’m working for send more than one sensor data with XBEE, I use STM32F4 Discovery Module. But I’m not sure Should I use Xbees AT mode or API mode? Thanks for help. --- ## [Can not find remote hub](https://forums.digi.com/t/can-not-find-remote-hub/20041)
**Author:** [@bigcat](https://forums.digi.com/u/bigcat)\ **Replies:** 1\ **Last updated:** [August 13, 2019, 2:48am UTC](https://forums.digi.com/t/can-not-find-remote-hub/20041 "2019-08-13T02:48:30Z")
Hi, I’m getting Device Status : Can not find remote hub at x.x.x.x when using the utility. same when I’m using its API (AwUsbApi.dll) I’m using AnywhereUSB/14 with it’s latest driver 40002668\_S and firmware 82002081\_R.… --- ## [Device disassociated after long sleep time](https://forums.digi.com/t/device-disassociated-after-long-sleep-time/16597)
**Author:** [@NicolasvTB](https://forums.digi.com/u/NicolasvTB)\ **Replies:** 4\ **Last updated:** [July 2, 2019, 9:30am UTC](https://forums.digi.com/t/device-disassociated-after-long-sleep-time/16597 "2019-07-02T09:30:25Z")
Hello everyone, I am facing a problem using the XBEE DigiMesh modules. My project consists in several sensor nodes configured as end devices. in each node there is an MCU that handles all the sleep timing (\>1min) and se… --- ## [Series 3 Legacy API Frame AO not available](https://forums.digi.com/t/series-3-legacy-api-frame-ao-not-available/20487)
**Author:** [@RobotGrrl](https://forums.digi.com/u/RobotGrrl)\ **Replies:** 0\ **Last updated:** [May 13, 2019, 8:00am UTC](https://forums.digi.com/t/series-3-legacy-api-frame-ao-not-available/20487 "2019-05-13T08:00:36Z")
Hi there, I have an XBee Pro Series 3 B (XBP9B-DPWT). I need to use this as a drop in replacement for some older Series 2 modules. I looked at the migration guide, and to my understanding, if AO (API options) is set to … [Next page](https://forums.digi.com/tag/api/26.md?match_all_tags=true&page=1&tags%5B%5D=api)