# \#at **URL:** https://forums.digi.com/tag/at/484.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Pro S2B to Pro S2B AT Coordinator to Router problems](https://forums.digi.com/t/pro-s2b-to-pro-s2b-at-coordinator-to-router-problems/32725)
**Author:** [@Steve\_L](https://forums.digi.com/u/Steve_L)\ **Replies:** 4\ **Last updated:** [October 22, 2024, 2:26pm UTC](https://forums.digi.com/t/pro-s2b-to-pro-s2b-at-coordinator-to-router-problems/32725 "2024-10-22T14:26:18Z")
I cant get my two XBee Pro XBP24BZ7 to communicate with each other over XCTU : One has ZigBee Router AT 22A7 the other has ZigBee Coordinator AT 20A7 firmware. Both have the same Pan ID and Baud rates Both have SH & … --- ## [Remote AT Commands not receiving an ack and fails](https://forums.digi.com/t/remote-at-commands-not-receiving-an-ack-and-fails/23312)
**Author:** [@dekelvaknin](https://forums.digi.com/u/dekelvaknin)\ **Replies:** 1\ **Last updated:** [December 7, 2022, 1:26pm UTC](https://forums.digi.com/t/remote-at-commands-not-receiving-an-ack-and-fails/23312 "2022-12-07T13:26:16Z")
Hi, I am using the python xbee library to communicate with an xbee-pro sx device. I am trying to test remote AT commands between two xbees on two different computers and i want to change the device’s network ID and HP w… --- ## [How can I change my xbee setup for AP = 0 from API mode (AP = 1 or AP =2) by using digi module in python ?](https://forums.digi.com/t/how-can-i-change-my-xbee-setup-for-ap-0-from-api-mode-ap-1-or-ap-2-by-using-digi-module-in-python/23168)
**Author:** [@Kyle\_case](https://forums.digi.com/u/Kyle_case)\ **Replies:** 4\ **Last updated:** [July 26, 2022, 3:30pm UTC](https://forums.digi.com/t/how-can-i-change-my-xbee-setup-for-ap-0-from-api-mode-ap-1-or-ap-2-by-using-digi-module-in-python/23168 "2022-07-26T15:30:54Z")
I am using XBee PRO S3B for wireless radio communication. Currently I am configuring it by XCTU, however, sometimes I need to reset or re configure with non graphical interface. Using digi module with python seemed goo… --- ## [How to send AT command to zigbee device using Python](https://forums.digi.com/t/how-to-send-at-command-to-zigbee-device-using-python/22311)
**Author:** [@sp\_trainee\_31](https://forums.digi.com/u/sp_trainee_31)\ **Replies:** 3\ **Last updated:** [July 3, 2022, 9:46am UTC](https://forums.digi.com/t/how-to-send-at-command-to-zigbee-device-using-python/22311 "2022-07-03T09:46:46Z")
Hi, I’m completely new to Python programming and I’d appreciate any assistance and advices given. I’m currently working on Zigbee device where I need to send a request command to get the result back. I have a python cod… --- ## [Using Xbee in API mode](https://forums.digi.com/t/using-xbee-in-api-mode/23021)
**Author:** [@berkayapali](https://forums.digi.com/u/berkayapali)\ **Replies:** 1\ **Last updated:** [April 1, 2022, 10:29am UTC](https://forums.digi.com/t/using-xbee-in-api-mode/23021 "2022-04-01T10:29:40Z")
Hello, I am having an issue about my Xbees. I want to communicate 3 Xbee in API mode but in a special way. What I mean is that every xbee has to communicate only one xbee and while 2 Xbee have same PAN ID the other one … --- ## [XBEE XBP24C digimesh DN (disocvery node) command](https://forums.digi.com/t/xbee-xbp24c-digimesh-dn-disocvery-node-command/22849)
**Author:** [@accacca](https://forums.digi.com/u/accacca)\ **Replies:** 0\ **Last updated:** [December 10, 2021, 10:51am UTC](https://forums.digi.com/t/xbee-xbp24c-digimesh-dn-disocvery-node-command/22849 "2021-12-10T10:51:16Z")
We have this digimesh network configuration Coordinator–\>Repeater–\>Endpoint2 | | Endpoint1 All devices are PRO S2C, always ON and communicate each others Repeater was removed from the network (powered off) Endpoin… --- ## [WR31 - problem with sending SMS (no response to ATZ command)](https://forums.digi.com/t/wr31-problem-with-sending-sms-no-response-to-atz-command/22486)
**Author:** [@jacek\_pl](https://forums.digi.com/u/jacek_pl)\ **Replies:** 0\ **Last updated:** [June 15, 2021, 1:15pm UTC](https://forums.digi.com/t/wr31-problem-with-sending-sms-no-response-to-atz-command/22486 "2021-06-15T13:15:41Z")
Hi guys, I’m using DIGI WR31 to send SMS messages. I’m using RealPort to send AT commands via Virtual COM Port. After the reboot of the modem it seems to be working fine, however after some time it seems to stop accepti… --- ## [How can I set the remote XBEE3 to Transparent mode using an API packet then save it to non volatile memory?](https://forums.digi.com/t/how-can-i-set-the-remote-xbee3-to-transparent-mode-using-an-api-packet-then-save-it-to-non-volatile-memory/21894)
**Author:** [@Bruce\_Mc](https://forums.digi.com/u/Bruce_Mc)\ **Replies:** 3\ **Last updated:** [October 16, 2020, 7:16am UTC](https://forums.digi.com/t/how-can-i-set-the-remote-xbee3-to-transparent-mode-using-an-api-packet-then-save-it-to-non-volatile-memory/21894 "2020-10-16T07:16:49Z")
I want to set up remote XBEE3s remotely. I can set the coordinator and router both to API mode and send API packets to set it up. This works and I can write it to memory. I then need to set the coordinator and remote b… --- ## [Troubles configuring Xbee with AT commands from microcontroller](https://forums.digi.com/t/troubles-configuring-xbee-with-at-commands-from-microcontroller/20760)
**Author:** [@henmill](https://forums.digi.com/u/henmill)\ **Replies:** 2\ **Last updated:** [September 12, 2019, 2:40pm UTC](https://forums.digi.com/t/troubles-configuring-xbee-with-at-commands-from-microcontroller/20760 "2019-09-12T14:40:42Z")
I am working on a battery-powered remote control project using XBee Pro S2C (intend to use XBEE3 in future. The goal is to not have to use XCTU to configure the modules, and instead have an 8-bit PIC send AT commands ove… --- ## [AT mode vs API mode](https://forums.digi.com/t/at-mode-vs-api-mode/20713)
**Author:** [@joseph11](https://forums.digi.com/u/joseph11)\ **Replies:** 0\ **Last updated:** [August 21, 2019, 4:11pm UTC](https://forums.digi.com/t/at-mode-vs-api-mode/20713 "2019-08-21T16:11:54Z")
Hi guys, I’m working for send more than one sensor data with XBEE, I use STM32F4 Discovery Module. But I’m not sure Should I use Xbees AT mode or API mode? Thanks for help. --- ## [Cellular Network Time via ATDT](https://forums.digi.com/t/cellular-network-time-via-atdt/20636)
**Author:** [@ehughes](https://forums.digi.com/u/ehughes)\ **Replies:** 1\ **Last updated:** [July 16, 2019, 3:43pm UTC](https://forums.digi.com/t/cellular-network-time-via-atdt/20636 "2019-07-16T15:43:00Z")
I am using an XBEE3 CAT-M1 device. Currently I do NTP requests to get time. In my current firmware I sync time to my local flywheel at boot and then once every 24 hours. I am considering using the result of ATDT. 1… --- ## [How to triangulate XBee3 Nb-IoT module using cellular network ?](https://forums.digi.com/t/how-to-triangulate-xbee3-nb-iot-module-using-cellular-network/20625)
**Author:** [@rajib](https://forums.digi.com/u/rajib)\ **Replies:** 1\ **Last updated:** [July 11, 2019, 3:56pm UTC](https://forums.digi.com/t/how-to-triangulate-xbee3-nb-iot-module-using-cellular-network/20625 "2019-07-11T15:56:22Z")
Trying to use cellular networks to give me an approximate idea about the location of the device. So that we can save money by not using a GPS module. I know about the AS AT-command ( https://www.digi.com/resources/docum… --- ## [cellular location](https://forums.digi.com/t/cellular-location/20445)
**Author:** [@amitkumar](https://forums.digi.com/u/amitkumar)\ **Replies:** 1\ **Last updated:** [May 9, 2019, 10:40am UTC](https://forums.digi.com/t/cellular-location/20445 "2019-05-09T10:40:07Z")
Hello Everyone, I am working on XB3-C-A2-UT-001 module. I want how can i get cellular location? i have refer the digi document link www.digi.com/resources/documentation/Digidocs/90002258/#Containers/cont\_at\_cmd\_descri… --- ## [XBee S6B API AT Comunication.](https://forums.digi.com/t/xbee-s6b-api-at-comunication/19876)
**Author:** [@Marco\_Polisel](https://forums.digi.com/u/Marco_Polisel)\ **Replies:** 0\ **Last updated:** [September 14, 2018, 3:43pm UTC](https://forums.digi.com/t/xbee-s6b-api-at-comunication/19876 "2018-09-14T15:43:17Z")
Hi, Guys. I’d like to send and receive AT Commands in API mode to/from a XBee S6B/Pro logged on my home network thru my internet router. Is is possible to do this ? Can I read the XBee pin state using simply the putty … --- ## [Xbee S2 with DHT22](https://forums.digi.com/t/xbee-s2-with-dht22/19570)
**Author:** [@VijayKRao](https://forums.digi.com/u/VijayKRao)\ **Replies:** 0\ **Last updated:** [May 31, 2018, 12:11pm UTC](https://forums.digi.com/t/xbee-s2-with-dht22/19570 "2018-05-31T12:11:29Z")
Hi Folks, I have just started experimenting with Xbee radios and I have hit the wall. Here, is my project story. I am trying to receive Temperature and Humidity data from remote XBee-S2 (Router AT) Connected with DHT… --- ## [Failed at step EXEC spawning](https://forums.digi.com/t/failed-at-step-exec-spawning/19327)
**Author:** [@coromim](https://forums.digi.com/u/coromim)\ **Replies:** 0\ **Last updated:** [March 22, 2018, 12:39pm UTC](https://forums.digi.com/t/failed-at-step-exec-spawning/19327 "2018-03-22T12:39:55Z")
Hello host OS version: CentOS Linux release 7.4.1708 (Core) device concerned: PortServer TS2 After following steps described in https://forms.na1.netsuite.com/app/site/hosting/scriptlet.nl?script=457&deploy=2&… --- ## [xBEE PRO S1 UNABLE TO SEND OK RESPONSE TO MCU](https://forums.digi.com/t/xbee-pro-s1-unable-to-send-ok-response-to-mcu/18965)
**Author:** [@karan1990](https://forums.digi.com/u/karan1990)\ **Replies:** 1\ **Last updated:** [December 29, 2017, 10:17am UTC](https://forums.digi.com/t/xbee-pro-s1-unable-to-send-ok-response-to-mcu/18965 "2017-12-29T10:17:10Z")
HI , AM USING XBE PRO S1 WITH ATMEL MCU TO TEST AT COMMAND.FIRMWARE IS 8073 FOR PDT FAMILY XBP24-DM FUNCTION SET :XBEE PRO DIGIMESH2.4. AM UNABLE TO GET OK RESPONSE FOR +++ HARDWARE CONFIG: VCC TO MCU 3.3 & GND TO GN… --- ## [unable to get response from Xbee Pro s1 for +++ command](https://forums.digi.com/t/unable-to-get-response-from-xbee-pro-s1-for-command/18970)
**Author:** [@SHYAM\_NARAYAN\_PATEL](https://forums.digi.com/u/SHYAM_NARAYAN_PATEL)\ **Replies:** 4\ **Last updated:** [December 22, 2017, 11:19am UTC](https://forums.digi.com/t/unable-to-get-response-from-xbee-pro-s1-for-command/18970 "2017-12-22T11:19:19Z")
AM USING XBE PRO S1 WITH ATMEL MCU TO TEST AT COMMAND.FIRMWARE IS 8073 FOR PDT FAMILY XBP24-DM FUNCTION SET :XBEE PRO DIGIMESH2.4. AM UNABLE TO GET OK RESPONSE FOR +++ HARDWARE CONFIG: VCC TO MCU 3.3 & GND TO GND TX … --- ## [Does Anyone Have a Good "Cheat Sheet" on AT Commands for Serial Interfacing?](https://forums.digi.com/t/does-anyone-have-a-good-cheat-sheet-on-at-commands-for-serial-interfacing/18820)
**Author:** [@silver2row](https://forums.digi.com/u/silver2row)\ **Replies:** 1\ **Last updated:** [October 24, 2017, 9:37am UTC](https://forums.digi.com/t/does-anyone-have-a-good-cheat-sheet-on-at-commands-for-serial-interfacing/18820 "2017-10-24T09:37:47Z")
Hello, I have found some resources on AT Commands for serial interfacing w/ the BeagleBone Black, my PC, and the Wireless Connectivity Kit (two XBee modules w/ adapter boards). I have not found a good solution for conn… --- ## [Missing Supply Voltage option - XBee S1](https://forums.digi.com/t/missing-supply-voltage-option-xbee-s1/17925)
**Author:** [@trefrosk](https://forums.digi.com/u/trefrosk)\ **Replies:** 2\ **Last updated:** [January 23, 2017, 10:12am UTC](https://forums.digi.com/t/missing-supply-voltage-option-xbee-s1/17925 "2017-01-23T10:12:29Z")
The AT command for viewing supply voltage according to all documentation I’ve ready is AT%V. I however get an error on my XBee Series 1. It does not appear in XCTU either, as it does for my ZigBees. --- ## [Can an XBee in API mode receive data through serial?](https://forums.digi.com/t/can-an-xbee-in-api-mode-receive-data-through-serial/16714)
**Author:** [@lilyhack](https://forums.digi.com/u/lilyhack)\ **Replies:** 2\ **Last updated:** [December 29, 2016, 10:12am UTC](https://forums.digi.com/t/can-an-xbee-in-api-mode-receive-data-through-serial/16714 "2016-12-29T10:12:52Z")
Following the python-Xbee library I am trying to communicate between 2 XBees Using XBee S2C Setup: Coordinator API=2, running the code in python @ Mac Router AT mode, running python code @ Mac Below data sending cod… --- ## [Node discovery does't return desired response.](https://forums.digi.com/t/node-discovery-doest-return-desired-response/17283)
**Author:** [@Noel](https://forums.digi.com/u/Noel)\ **Replies:** 1\ **Last updated:** [August 24, 2016, 3:45am UTC](https://forums.digi.com/t/node-discovery-doest-return-desired-response/17283 "2016-08-24T03:45:40Z")
I have configured three XBee’s with each other.One of the XB-S2C (API) is configured as a Coordinator and another XB-S2C and XB-S2 (both AT) as End Devices. They communicate with each other as normal, and I have no issu… --- ## [Point me to frame format(s) for ATND command in API mode?](https://forums.digi.com/t/point-me-to-frame-format-s-for-atnd-command-in-api-mode/17049)
**Author:** [@circularfire](https://forums.digi.com/u/circularfire)\ **Replies:** 1\ **Last updated:** [July 18, 2016, 9:18am UTC](https://forums.digi.com/t/point-me-to-frame-format-s-for-atnd-command-in-api-mode/17049 "2016-07-18T09:18:46Z")
I’ve been trying to figure out what responses come back from ATND in API mode, and the frame format(s). I found plenty for ‘ATND’ in transparent mode, but I can’t seem to come up with the right search keywords to get de… --- ## [Does the node need a delay for other operations after ATND command?](https://forums.digi.com/t/does-the-node-need-a-delay-for-other-operations-after-atnd-command/17048)
**Author:** [@MianTang](https://forums.digi.com/u/MianTang)\ **Replies:** 3\ **Last updated:** [July 8, 2016, 3:03pm UTC](https://forums.digi.com/t/does-the-node-need-a-delay-for-other-operations-after-atnd-command/17048 "2016-07-08T15:03:55Z")
Hi, I’m using XBee Pro 538, say I have three nodes. I sent ATND command to one node in order to find another two nodes. Then I wait for probably 20 seconds and get info of other two. After that, I want to configure both… --- ## [Bee S2 + Arduino AT Command problems with less than 50ms](https://forums.digi.com/t/bee-s2-arduino-at-command-problems-with-less-than-50ms/17033)
**Author:** [@luisfelipeyb](https://forums.digi.com/u/luisfelipeyb)\ **Replies:** 1\ **Last updated:** [July 8, 2016, 11:14am UTC](https://forums.digi.com/t/bee-s2-arduino-at-command-problems-with-less-than-50ms/17033 "2016-07-08T11:14:17Z")
Hello!. I am working on a prototype of light tower for trail running, and I am using an Arduino One, and 10 Xbee S2. The coordinator API with the arduino I use a Xbee Shield from SainSmart. The problem is with a very b… --- ## [AT command to scan inside pan1234](https://forums.digi.com/t/at-command-to-scan-inside-pan1234/17022)
**Author:** [@DrDoggy](https://forums.digi.com/u/DrDoggy)\ **Replies:** 1\ **Last updated:** [July 4, 2016, 4:43am UTC](https://forums.digi.com/t/at-command-to-scan-inside-pan1234/17022 "2016-07-04T04:43:32Z")
bump… I set up the Pan to 1234, but then how do i scan it for modules using at commands ie… there is a button at the top right of xctu that looks like a bunch of bubbles, inside there is a scan button , when i press it… --- ## [Transparent mode no comms](https://forums.digi.com/t/transparent-mode-no-comms/16948)
**Author:** [@simonpearce](https://forums.digi.com/u/simonpearce)\ **Replies:** 4\ **Last updated:** [June 28, 2016, 3:46pm UTC](https://forums.digi.com/t/transparent-mode-no-comms/16948 "2016-06-28T15:46:37Z")
Hi there, I am having issues with a 900HP unit on a custom board. I cannot get the radio to communicate in transparent mode. The MCU is running at 5v with a level shifter between the RX/TX and Xbee RX/TX. Converts to 3.… --- ## [Transparent mode not working in one direction](https://forums.digi.com/t/transparent-mode-not-working-in-one-direction/16894)
**Author:** [@simonpearce](https://forums.digi.com/u/simonpearce)\ **Replies:** 1\ **Last updated:** [June 7, 2016, 9:15am UTC](https://forums.digi.com/t/transparent-mode-not-working-in-one-direction/16894 "2016-06-07T09:15:22Z")
I am trying to connect two Xbee S3B units together using transparent mode. The purpose is for purely direct serial comms. When I use them in explorer bases I can communicate using minicom across both units in either dire… --- ## [Select band/channel on Transport - Sierra Module](https://forums.digi.com/t/select-band-channel-on-transport-sierra-module/16870)
**Author:** [@nicodm](https://forums.digi.com/u/nicodm)\ **Replies:** 1\ **Last updated:** [June 3, 2016, 2:27am UTC](https://forums.digi.com/t/select-band-channel-on-transport-sierra-module/16870 "2016-06-03T02:27:16Z")
I’m using my transport WR44R with a Sierra Module I would like to manually select the frequency for connecting to the cellular network. The module supports selecting the frequency using AT commands, how can I send AT c… --- ## [ATMY (or ATAM) equivalent for XBEE 900 HP](https://forums.digi.com/t/atmy-or-atam-equivalent-for-xbee-900-hp/16599)
**Author:** [@ssinfod](https://forums.digi.com/u/ssinfod)\ **Replies:** 1\ **Last updated:** [April 18, 2016, 8:20am UTC](https://forums.digi.com/t/atmy-or-atam-equivalent-for-xbee-900-hp/16599 "2016-04-18T08:20:54Z")
Hello, I was using the XSTREAM RF modem in previous projects. Now, for a new project, I’m using the XBEE 900 HP in transparent mode. I would like to know what is the equivalent of the ATMY (or ATAM) command on the XBE… [Next page](https://forums.digi.com/tag/at/484.md?match_all_tags=true&page=1&tags%5B%5D=at)