# \#cli **URL:** https://forums.digi.com/tag/cli/236.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [EZ Connect not being discovered after reset from button](https://forums.digi.com/t/ez-connect-not-being-discovered-after-reset-from-button/32637)
**Author:** [@FelixPerez1](https://forums.digi.com/u/FelixPerez1)\ **Replies:** 1\ **Last updated:** [October 3, 2024, 7:55pm UTC](https://forums.digi.com/t/ez-connect-not-being-discovered-after-reset-from-button/32637 "2024-10-03T19:55:17Z")
After resetting a Digi EZ Connect 8 using the rear button, the Digi Navigator does not find the product, regardless of whether the app filters (HTTP, HTTPS, SSH) are enabled or disabled. If I perform a reset and keep a P… --- ## [Cli anywhereusb 24 plus client-side cli](https://forums.digi.com/t/cli-anywhereusb-24-plus-client-side-cli/22862)
**Author:** [@Sergey\_Serov](https://forums.digi.com/u/Sergey_Serov)\ **Replies:** 2\ **Last updated:** [December 28, 2022, 11:30am UTC](https://forums.digi.com/t/cli-anywhereusb-24-plus-client-side-cli/22862 "2022-12-28T11:30:44Z")
I’ve seen in the documentation that it is possible to use the client-side cli. Is this feature preserved in anywhereusb 24 plus? AwConsole.exe https://www.digi.com/support/knowledge-base/about-awconsole-cli-command-li… --- ## [I want to run a cli 'display serial' command from the shell pompt](https://forums.digi.com/t/i-want-to-run-a-cli-display-serial-command-from-the-shell-pompt/22993)
**Author:** [@jonhedberg](https://forums.digi.com/u/jonhedberg)\ **Replies:** 0\ **Last updated:** [March 14, 2022, 8:50am UTC](https://forums.digi.com/t/i-want-to-run-a-cli-display-serial-command-from-the-shell-pompt/22993 "2022-03-14T08:50:55Z")
the cli commmand ‘display serial’ shows some important info for monitoring serial ports. I would like to script this by using ssh to run remote commands. Problem is, ‘display serial’ is not a UNIX type command. Is the… --- ## [CLI - Show model and part number](https://forums.digi.com/t/cli-show-model-and-part-number/22979)
**Author:** [@k0r3](https://forums.digi.com/u/k0r3)\ **Replies:** 1\ **Last updated:** [March 2, 2022, 8:03am UTC](https://forums.digi.com/t/cli-show-model-and-part-number/22979 "2022-03-02T08:03:21Z")
Hi, I’m looking for a command to show the model and part number via the command line interface. If anyone is able to advise, it would be much appreciated! Thanks --- ## [ikev2 status from CLI](https://forums.digi.com/t/ikev2-status-from-cli/21889)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 1\ **Last updated:** [November 19, 2020, 3:23am UTC](https://forums.digi.com/t/ikev2-status-from-cli/21889 "2020-11-19T03:23:16Z")
CLI commands: I have a Digi that is using IKEV2 and I want to check the IKEV2 SAs, I get this: CORS15\>ikestat No IKE SAs OK This works fine: CORS15\>sastat IPsec SAs (total:1). Eroute 0 -\> 4 Outbound V1 SAs List … --- ## [Digitransport CLI commands list](https://forums.digi.com/t/digitransport-cli-commands-list/21616)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 0\ **Last updated:** [August 1, 2020, 5:15am UTC](https://forums.digi.com/t/digitransport-cli-commands-list/21616 "2020-08-01T05:15:00Z")
Is there a document with all the CLI commands and their explanation for the Digi Transport? The current manual is quite lacking in this regard. Specifically, the sastat command…on the router UI is shows me which interfa… --- ## [is there a cli command to set the destination IP and Port for multitx?](https://forums.digi.com/t/is-there-a-cli-command-to-set-the-destination-ip-and-port-for-multitx/21359)
**Author:** [@dbweiner](https://forums.digi.com/u/dbweiner)\ **Replies:** 1\ **Last updated:** [May 13, 2020, 10:54am UTC](https://forums.digi.com/t/is-there-a-cli-command-to-set-the-destination-ip-and-port-for-multitx/21359 "2020-05-13T10:54:09Z")
--- ## [How to send CLI commands through serial connection in a WR21?](https://forums.digi.com/t/how-to-send-cli-commands-through-serial-connection-in-a-wr21/19790)
**Author:** [@JoaoMRocha](https://forums.digi.com/u/JoaoMRocha)\ **Replies:** 1\ **Last updated:** [August 17, 2018, 5:56am UTC](https://forums.digi.com/t/how-to-send-cli-commands-through-serial-connection-in-a-wr21/19790 "2018-08-17T05:56:33Z")
I’m trying to send CLI commands from a PLC to a Digi Transport WR21 in order to have it send an SMS to the number specified in the command and with the text also specified in the command. Ex: sendSMS (telephone nº) “text… --- ## [How can I send CLI commands to a Transport WR21 using the serial port?](https://forums.digi.com/t/how-can-i-send-cli-commands-to-a-transport-wr21-using-the-serial-port/19789)
**Author:** [@JoaoMRocha](https://forums.digi.com/u/JoaoMRocha)\ **Replies:** 1\ **Last updated:** [August 17, 2018, 5:56am UTC](https://forums.digi.com/t/how-can-i-send-cli-commands-to-a-transport-wr21-using-the-serial-port/19789 "2018-08-17T05:56:21Z")
I need to use a Transport WR21 to receive CLI commands through the serial port from a PLC so that it sends an SMS to the number and with text I define in the command. How can I achieve this? Thanks in advance --- ## [Can I add a static DHCP lease from the CLI?](https://forums.digi.com/t/can-i-add-a-static-dhcp-lease-from-the-cli/18887)
**Author:** [@SuicidalLabRat](https://forums.digi.com/u/SuicidalLabRat)\ **Replies:** 1\ **Last updated:** [November 8, 2017, 3:39am UTC](https://forums.digi.com/t/can-i-add-a-static-dhcp-lease-from-the-cli/18887 "2017-11-08T03:39:40Z")
We have a fleet of WR11’s in the field that need additional device MAC addresses added to their DHCP static lease tables. We have remote access to the units and are hoping to remotely make additions to the static lease … --- ## [list of CLI Commands](https://forums.digi.com/t/list-of-cli-commands/14779)
**Author:** [@NicoPeeters](https://forums.digi.com/u/NicoPeeters)\ **Replies:** 3\ **Last updated:** [October 5, 2017, 2:50am UTC](https://forums.digi.com/t/list-of-cli-commands/14779 "2017-10-05T02:50:06Z")
is there a list of commands I can use, and what their purpose is? --- ## [How use Ping command via SMS on DIGI transport WR31?](https://forums.digi.com/t/how-use-ping-command-via-sms-on-digi-transport-wr31/18284)
**Author:** [@Lecajj](https://forums.digi.com/u/Lecajj)\ **Replies:** 1\ **Last updated:** [May 30, 2017, 3:44am UTC](https://forums.digi.com/t/how-use-ping-command-via-sms-on-digi-transport-wr31/18284 "2017-05-30T03:44:12Z")
Hello, I exactly configured my Digi Transport WR31 to send/receive SMS as it explain this doc : http://ftp1.digi.com/support/documentation/QN\_018\_Configuring%20a%20Digi%20TransPort%20router%20to.pdf Most commands work … --- ## [shutdown interface eth 0](https://forums.digi.com/t/shutdown-interface-eth-0/17855)
**Author:** [@jjssn](https://forums.digi.com/u/jjssn)\ **Replies:** 1\ **Last updated:** [January 6, 2017, 4:44am UTC](https://forums.digi.com/t/shutdown-interface-eth-0/17855 "2017-01-06T04:44:43Z")
Hi, Is it possible to shutdown (disable) a ethernet port so the ethernet interface returns as down instead of up? I have link on eth 0 but due to troubleshooting I want to take it offline. Model: WR44v2 --- ## [How to disable CLI on Serial 0 for WR21](https://forums.digi.com/t/how-to-disable-cli-on-serial-0-for-wr21/17701)
**Author:** [@sulliwk06](https://forums.digi.com/u/sulliwk06)\ **Replies:** 1\ **Last updated:** [November 30, 2016, 2:20am UTC](https://forums.digi.com/t/how-to-disable-cli-on-serial-0-for-wr21/17701 "2016-11-30T02:20:19Z")
I am using a WR21 to accept a telnet connection and access a device connected to Serial 0. The connection works great, but after I disconnect, the connected device is sending some data to the serial port which gets inter… --- ## [Automatic activation of relay switch via Digi Transport WR31](https://forums.digi.com/t/automatic-activation-of-relay-switch-via-digi-transport-wr31/17152)
**Author:** [@a.thompson](https://forums.digi.com/u/a.thompson)\ **Replies:** 1\ **Last updated:** [July 29, 2016, 4:10am UTC](https://forums.digi.com/t/automatic-activation-of-relay-switch-via-digi-transport-wr31/17152 "2016-07-29T04:10:58Z")
I have connected a 12V relay to the WR31 unit and can control the switch using the standard I/O commands via the CLI. I would like the relay to automatically switch on and off when any equipment the relay is connected t… --- ## [How does one programatically determine a SIM card's activation status?](https://forums.digi.com/t/how-does-one-programatically-determine-a-sim-cards-activation-status/15426)
**Author:** [@gcanderson](https://forums.digi.com/u/gcanderson)\ **Replies:** 0\ **Last updated:** [September 18, 2015, 11:59am UTC](https://forums.digi.com/t/how-does-one-programatically-determine-a-sim-cards-activation-status/15426 "2015-09-18T11:59:15Z")
Our customer has a fleet of trucks with a WR44 gateway that records information from the truck and sends it over the cellular network to a service running on a webserver that stores the relevant information in a database… --- ## [Portserver TS 16 not getting SNMP login traps after login using web browser](https://forums.digi.com/t/portserver-ts-16-not-getting-snmp-login-traps-after-login-using-web-browser/15182)
**Author:** [@orbinl](https://forums.digi.com/u/orbinl)\ **Replies:** 1\ **Last updated:** [July 31, 2015, 10:11am UTC](https://forums.digi.com/t/portserver-ts-16-not-getting-snmp-login-traps-after-login-using-web-browser/15182 "2015-07-31T10:11:25Z")
We have several Portserver TS 16 Model#50001207-01 AD running POST ver:82000685\_G and Firmware ver #82000684\_T1 I am trying to send the snmp user login success/fail traps to an snmp manager application. Currently I … --- ## [Configuration of ospf.conf via serial console](https://forums.digi.com/t/configuration-of-ospf-conf-via-serial-console/14867)
**Author:** [@towdie](https://forums.digi.com/u/towdie)\ **Replies:** 1\ **Last updated:** [May 22, 2015, 8:55am UTC](https://forums.digi.com/t/configuration-of-ospf-conf-via-serial-console/14867 "2015-05-22T08:55:26Z")
Hello, we need to configure many routers at same time so we are using generated configs and paste them via serial console. As we need to use also OSPF, is there any possibility to configure/edit/transfer ospf.conf file… --- ## [FTP Cli on WR44](https://forums.digi.com/t/ftp-cli-on-wr44/14222)
**Author:** [@digiuser833](https://forums.digi.com/u/digiuser833)\ **Replies:** 1\ **Last updated:** [January 23, 2015, 4:51am UTC](https://forums.digi.com/t/ftp-cli-on-wr44/14222 "2015-01-23T04:51:42Z")
Any examples on how to user the FTP cli on the router? ftp USAGE: FTP |‘.’ … I tried but keep returning error, I want to download and upload file from remote ftp server etc… ftp ftp.server.com.sg anonymous blank… --- ## [Command line device discovery?](https://forums.digi.com/t/command-line-device-discovery/13179)
**Author:** [@glenncsimon](https://forums.digi.com/u/glenncsimon)\ **Replies:** 1\ **Last updated:** [June 27, 2014, 9:06am UTC](https://forums.digi.com/t/command-line-device-discovery/13179 "2014-06-27T09:06:27Z")
--- ## [Command line device discovery?](https://forums.digi.com/t/command-line-device-discovery/13180)
**Author:** [@glenncsimon](https://forums.digi.com/u/glenncsimon)\ **Replies:** 2\ **Last updated:** [June 25, 2014, 12:30pm UTC](https://forums.digi.com/t/command-line-device-discovery/13180 "2014-06-25T12:30:36Z")
I need a windows command line version of the GUI device discovery tool. I need it for an automation program I am working on, to identify the correspondence of MAC address to IP address. After searching the digi web sit… --- ## [User scripts don't run despite following instructions in the user manual.](https://forums.digi.com/t/user-scripts-dont-run-despite-following-instructions-in-the-user-manual/12949)
**Author:** [@Marcus1](https://forums.digi.com/u/Marcus1)\ **Replies:** 2\ **Last updated:** [May 13, 2014, 10:28am UTC](https://forums.digi.com/t/user-scripts-dont-run-despite-following-instructions-in-the-user-manual/12949 "2014-05-13T10:28:26Z")
I’m trying to save my iptables rules and I’m having no luck, despite following the instructions found in the user manual. I’ve tried adding a symlink in rc2.d, I’ve tried adding the commands to the rc.user file in the /u… --- ## [NET+OS 7.5 CLI Telnet problem](https://forums.digi.com/t/net-os-7-5-cli-telnet-problem/4269)
**Author:** [@ppatierno](https://forums.digi.com/u/ppatierno)\ **Replies:** 0\ **Last updated:** [November 2, 2010, 4:28pm UTC](https://forums.digi.com/t/net-os-7-5-cli-telnet-problem/4269 "2010-11-02T16:28:04Z")
Hello, I have a Digi Connect ME module with Plug-and-Play firmware and I can execute the following command : set service range=5 nodelay=on without any problems using Telnet session. I have bought a Jump Start Kit wi…