# \#clone

**URL:** https://forums.digi.com/tag/clone/1174.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [How to clone program from flash memory, from RCM3200 to another RCM3200?](https://forums.digi.com/t/how-to-clone-program-from-flash-memory-from-rcm3200-to-another-rcm3200/20143)

<div class="topic-metadata">

**Author:** [@btc888](https://forums.digi.com/u/btc888)\
**Replies:** 3\
**Last updated:** [January 14, 2019, 4:28pm UTC](https://forums.digi.com/t/how-to-clone-program-from-flash-memory-from-rcm3200-to-another-rcm3200/20143 "2019-01-14T16:28:04Z")

</div>

I would like to obtain the code from the board and flash it to another board, to make a clone. This is for repair of device where the manufacturer has gone out of business.

---

## [Copy compiled code?](https://forums.digi.com/t/copy-compiled-code/17159)

<div class="topic-metadata">

**Author:** [@danielleoh](https://forums.digi.com/u/danielleoh)\
**Replies:** 1\
**Last updated:** [August 2, 2016, 6:14pm UTC](https://forums.digi.com/t/copy-compiled-code/17159 "2016-08-02T18:14:43Z")

</div>

Working with a legacy product where the client has lost their source code but have a working unit. They bought the cloning board, but apparently the “okay to clone” bit wasn’t set when the code was initially compiled. I…

---

## [Rabbit 3000 cloning issues](https://forums.digi.com/t/rabbit-3000-cloning-issues/15837)

<div class="topic-metadata">

**Author:** [@kevtd](https://forums.digi.com/u/kevtd)\
**Replies:** 4\
**Last updated:** [November 25, 2015, 2:57pm UTC](https://forums.digi.com/t/rabbit-3000-cloning-issues/15837 "2015-11-25T14:57:45Z")

</div>

I created a cloning cable based on the wiring diagram of the cloning board (TN207). For the most part, it functions properly. However, about half the time, I connect it up, press reset, and nothing happens. The status…

---

## [Rabbit cloning board.](https://forums.digi.com/t/rabbit-cloning-board/13272)

<div class="topic-metadata">

**Author:** [@sweit](https://forums.digi.com/u/sweit)\
**Replies:** 2\
**Last updated:** [July 8, 2014, 10:58am UTC](https://forums.digi.com/t/rabbit-cloning-board/13272 "2014-07-08T10:58:20Z")

</div>

Hello, I’m trying to use the rabbit cloning board. The instructions tell me to edit a line in rabbitbios.c that reads: #define ENABLECLONING 0 This line is not in rabbitbios.c I’m using Dynamic C 9.62 in windows 8.1 C…

---

## [BL2010 Rabbit Board developed red (bad) light during cloning now nothing can be loaded](https://forums.digi.com/t/bl2010-rabbit-board-developed-red-bad-light-during-cloning-now-nothing-can-be-loaded/12629)

<div class="topic-metadata">

**Author:** [@sbvancel](https://forums.digi.com/u/sbvancel)\
**Replies:** 3\
**Last updated:** [March 6, 2014, 8:30am UTC](https://forums.digi.com/t/bl2010-rabbit-board-developed-red-bad-light-during-cloning-now-nothing-can-be-loaded/12629 "2014-03-06T08:30:41Z")

</div>

Trying to clone the board. Used the software to test the target board but now after several attempts to load program there is a red light on the target board that says “bad”. The software recognizes the board but cannot…