# \#command **URL:** https://forums.digi.com/tag/command/434.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [find IMEI wr21](https://forums.digi.com/t/find-imei-wr21/23005)
**Author:** [@omunoz\_nipsco](https://forums.digi.com/u/omunoz_nipsco)\ **Replies:** 2\ **Last updated:** [April 19, 2022, 1:54pm UTC](https://forums.digi.com/t/find-imei-wr21/23005 "2022-04-19T13:54:51Z")
How can I find IMEI number from a WR21, which the label fell off. Modemstat ?, doesn’t work on up-to-date (8.4.0.3) firmware wr21. Command: modemstat ? Command result Outcome: Got modem status OK … --- ## [CLI - Show model and part number](https://forums.digi.com/t/cli-show-model-and-part-number/22979)
**Author:** [@k0r3](https://forums.digi.com/u/k0r3)\ **Replies:** 1\ **Last updated:** [March 2, 2022, 8:03am UTC](https://forums.digi.com/t/cli-show-model-and-part-number/22979 "2022-03-02T08:03:21Z")
Hi, I’m looking for a command to show the model and part number via the command line interface. If anyone is able to advise, it would be much appreciated! Thanks --- ## [Digitransport CLI commands list](https://forums.digi.com/t/digitransport-cli-commands-list/21616)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 0\ **Last updated:** [August 1, 2020, 5:15am UTC](https://forums.digi.com/t/digitransport-cli-commands-list/21616 "2020-08-01T05:15:00Z")
Is there a document with all the CLI commands and their explanation for the Digi Transport? The current manual is quite lacking in this regard. Specifically, the sastat command…on the router UI is shows me which interfa… --- ## [cellular location](https://forums.digi.com/t/cellular-location/20445)
**Author:** [@amitkumar](https://forums.digi.com/u/amitkumar)\ **Replies:** 1\ **Last updated:** [May 9, 2019, 10:40am UTC](https://forums.digi.com/t/cellular-location/20445 "2019-05-09T10:40:07Z")
Hello Everyone, I am working on XB3-C-A2-UT-001 module. I want how can i get cellular location? i have refer the digi document link www.digi.com/resources/documentation/Digidocs/90002258/#Containers/cont\_at\_cmd\_descri… --- ## [Can I send an AT command through DIGI Remote Manager web services?](https://forums.digi.com/t/can-i-send-an-at-command-through-digi-remote-manager-web-services/18123)
**Author:** [@vincentaulia](https://forums.digi.com/u/vincentaulia)\ **Replies:** 7\ **Last updated:** [March 13, 2018, 9:50am UTC](https://forums.digi.com/t/can-i-send-an-at-command-through-digi-remote-manager-web-services/18123 "2018-03-13T09:50:22Z")
Hi, I’m new to the Xbee community. I have a Digi remote manager developer account set up, an Xbee Gateway and an Xbee S2B in router API mode. I want to send AT command to the Xbee router via the web service instead of XC… --- ## [Can I send reset AT/API command to Digi-mesh Slave Xbee-pro from Master node](https://forums.digi.com/t/can-i-send-reset-at-api-command-to-digi-mesh-slave-xbee-pro-from-master-node/18683)
**Author:** [@SHYAM\_NARAYAN\_PATEL](https://forums.digi.com/u/SHYAM_NARAYAN_PATEL)\ **Replies:** 5\ **Last updated:** [March 12, 2018, 11:54am UTC](https://forums.digi.com/t/can-i-send-reset-at-api-command-to-digi-mesh-slave-xbee-pro-from-master-node/18683 "2018-03-12T11:54:40Z")
I have Digi-mesh Xbee pro s1 Digi-mesh DM24 devices. I want to reset/reboot my slave device remotely. How is it possible? I have tried “FR” command via AT-mode (XCTU) and it worked for itself, but my requirement is to … --- ## [S6B (0x2026) Ping ('P','G') AT Command problem](https://forums.digi.com/t/s6b-0x2026-ping-p-g-at-command-problem/18072)
**Author:** [@norcio](https://forums.digi.com/u/norcio)\ **Replies:** 2\ **Last updated:** [February 28, 2017, 3:32pm UTC](https://forums.digi.com/t/s6b-0x2026-ping-p-g-at-command-problem/18072 "2017-02-28T15:32:30Z")
Wifi module(S6B firmware 0x2026) is connected to network. IP address is assigned from dhcp. I’m trying AT command PG to ping computer1 in the same network and I get AT command response “reply0001”. Firewall is disabled o… --- ## [Can i send command from serial port to ethernet port with digi connect me?](https://forums.digi.com/t/can-i-send-command-from-serial-port-to-ethernet-port-with-digi-connect-me/17681)
**Author:** [@andrewela](https://forums.digi.com/u/andrewela)\ **Replies:** 4\ **Last updated:** [November 30, 2016, 10:21am UTC](https://forums.digi.com/t/can-i-send-command-from-serial-port-to-ethernet-port-with-digi-connect-me/17681 "2016-11-30T10:21:47Z")
Hi, i’m a beginner in the microcontrollers world and i start with using the Digi Connect ME. After the configuration I attack the ethernet cable and the primary serial port with my PC and with HyperTerminal i start a con… --- ## [Does the node need a delay for other operations after ATND command?](https://forums.digi.com/t/does-the-node-need-a-delay-for-other-operations-after-atnd-command/17048)
**Author:** [@MianTang](https://forums.digi.com/u/MianTang)\ **Replies:** 3\ **Last updated:** [July 8, 2016, 3:03pm UTC](https://forums.digi.com/t/does-the-node-need-a-delay-for-other-operations-after-atnd-command/17048 "2016-07-08T15:03:55Z")
Hi, I’m using XBee Pro 538, say I have three nodes. I sent ATND command to one node in order to find another two nodes. Then I wait for probably 20 seconds and get info of other two. After that, I want to configure both… --- ## [Bee S2 + Arduino AT Command problems with less than 50ms](https://forums.digi.com/t/bee-s2-arduino-at-command-problems-with-less-than-50ms/17033)
**Author:** [@luisfelipeyb](https://forums.digi.com/u/luisfelipeyb)\ **Replies:** 1\ **Last updated:** [July 8, 2016, 11:14am UTC](https://forums.digi.com/t/bee-s2-arduino-at-command-problems-with-less-than-50ms/17033 "2016-07-08T11:14:17Z")
Hello!. I am working on a prototype of light tower for trail running, and I am using an Arduino One, and 10 Xbee S2. The coordinator API with the arduino I use a Xbee Shield from SainSmart. The problem is with a very b… --- ## [AT command to scan inside pan1234](https://forums.digi.com/t/at-command-to-scan-inside-pan1234/17022)
**Author:** [@DrDoggy](https://forums.digi.com/u/DrDoggy)\ **Replies:** 1\ **Last updated:** [July 4, 2016, 4:43am UTC](https://forums.digi.com/t/at-command-to-scan-inside-pan1234/17022 "2016-07-04T04:43:32Z")
bump… I set up the Pan to 1234, but then how do i scan it for modules using at commands ie… there is a button at the top right of xctu that looks like a bunch of bubbles, inside there is a scan button , when i press it… --- ## [XBEE S3B won't enter command mode?](https://forums.digi.com/t/xbee-s3b-wont-enter-command-mode/15977)
**Author:** [@simonpearce](https://forums.digi.com/u/simonpearce)\ **Replies:** 3\ **Last updated:** [December 23, 2015, 3:31pm UTC](https://forums.digi.com/t/xbee-s3b-wont-enter-command-mode/15977 "2015-12-23T15:31:09Z")
Hi to you all this is my first time on the forum so please take it easy on me if this is simple. Okay so I have 3 xbee’s XBP9B-DMSTB002 rev E I am trying to connect to them in X-CTU and am having no luck. I have tried … --- ## [Remote AT command request not working](https://forums.digi.com/t/remote-at-command-request-not-working/15835)
**Author:** [@TheCrazyInventor](https://forums.digi.com/u/TheCrazyInventor)\ **Replies:** 4\ **Last updated:** [November 25, 2015, 8:12am UTC](https://forums.digi.com/t/remote-at-command-request-not-working/15835 "2015-11-25T08:12:30Z")
My setup looks like this: 1 coordinator, 2 routers in the same network. All of them are 865/868LP 10K devices. I’m trying to query the AT parameter DB (RSSI) from one of the routers through the coordinator device. All d… --- ## [XBee S6B unattended switch to data mode when receiving RF frame](https://forums.digi.com/t/xbee-s6b-unattended-switch-to-data-mode-when-receiving-rf-frame/15582)
**Author:** [@GtpUser](https://forums.digi.com/u/GtpUser)\ **Replies:** 3\ **Last updated:** [October 15, 2015, 9:33am UTC](https://forums.digi.com/t/xbee-s6b-unattended-switch-to-data-mode-when-receiving-rf-frame/15582 "2015-10-15T09:33:47Z")
Hello, I have an XBee S6B that is initialized at startup with some AT Commands. This works fine until at initalization time it found RF data. In this case, it seems to be impossibile to finish my initialization sequence… --- ## [build a route to an aggregator](https://forums.digi.com/t/build-a-route-to-an-aggregator/15483)
**Author:** [@ignaciofp](https://forums.digi.com/u/ignaciofp)\ **Replies:** 1\ **Last updated:** [October 1, 2015, 10:37am UTC](https://forums.digi.com/t/build-a-route-to-an-aggregator/15483 "2015-10-01T10:37:16Z")
Hello everyone, I’m trying to improve a big mesh network and I want to keep updated the routes to my central router (aka aggregator node). I’m sending via X-CTU an AT AG FFFF to the aggregator and I’m not getting any … --- ## [How can I know if an output is set?](https://forums.digi.com/t/how-can-i-know-if-an-output-is-set/14590)
**Author:** [@pedrobneto](https://forums.digi.com/u/pedrobneto)\ **Replies:** 4\ **Last updated:** [May 20, 2015, 8:08am UTC](https://forums.digi.com/t/how-can-i-know-if-an-output-is-set/14590 "2015-05-20T08:08:39Z")
Say that I have two routers and one coordinator. On one router I have a button as an input configured as change detect that will send data to the coordinator connected to an arduino. With that button pushed, I must chang… --- ## [my zigbee is not communicating with pc through commands](https://forums.digi.com/t/my-zigbee-is-not-communicating-with-pc-through-commands/14754)
**Author:** [@poonam\_patil](https://forums.digi.com/u/poonam_patil)\ **Replies:** 1\ **Last updated:** [April 27, 2015, 11:00am UTC](https://forums.digi.com/t/my-zigbee-is-not-communicating-with-pc-through-commands/14754 "2015-04-27T11:00:18Z")
I have configured one zigbee pro S2B module as coordinator. when I send VR command frame query from XCTU to coordinator zigbee, it is giving an instant response to XCTU. AT Command - VR - firmware version 7E 00 04 08 … --- ## [How to show a command promt in Compact 7 ?](https://forums.digi.com/t/how-to-show-a-command-promt-in-compact-7/13862)
**Author:** [@Henrik40](https://forums.digi.com/u/Henrik40)\ **Replies:** 1\ **Last updated:** [November 4, 2014, 8:58am UTC](https://forums.digi.com/t/how-to-show-a-command-promt-in-compact-7/13862 "2014-11-04T08:58:50Z")
I just want to open a command promt in Compact 7 on a Digi CCWi-i.MX53 board. When i write “cmd” in Run under the Start menu it gives this error: “CMD cannot start. Low on memory or too many console windows open. Please … --- ## [Where can I find the source for command line tools (specifically update\_flash)](https://forums.digi.com/t/where-can-i-find-the-source-for-command-line-tools-specifically-update-flash/13334)
**Author:** [@digiDave](https://forums.digi.com/u/digiDave)\ **Replies:** 1\ **Last updated:** [July 18, 2014, 3:15pm UTC](https://forums.digi.com/t/where-can-i-find-the-source-for-command-line-tools-specifically-update-flash/13334 "2014-07-18T15:15:17Z")
--- ## [How do I delete a line from config.da0 using the Remote Manager?](https://forums.digi.com/t/how-do-i-delete-a-line-from-config-da0-using-the-remote-manager/13308)
**Author:** [@cndnheat](https://forums.digi.com/u/cndnheat)\ **Replies:** 1\ **Last updated:** [July 14, 2014, 3:06am UTC](https://forums.digi.com/t/how-do-i-delete-a-line-from-config-da0-using-the-remote-manager/13308 "2014-07-14T03:06:27Z")
I want to update my config.da0, but I need to remove a line from the file, in order for the change I want to add to work properly. I’m trying to change the sntp rate from random to a fixed time. I am trying to add: sn… --- ## [Cannot get into command mode but XCTU works perfectly](https://forums.digi.com/t/cannot-get-into-command-mode-but-xctu-works-perfectly/12657)
**Author:** [@dukeofdoom](https://forums.digi.com/u/dukeofdoom)\ **Replies:** 1\ **Last updated:** [April 6, 2014, 5:36pm UTC](https://forums.digi.com/t/cannot-get-into-command-mode-but-xctu-works-perfectly/12657 "2014-04-06T17:36:59Z")
I have an XBEE ZB running coordinator API mode. It works fine in XCTU (MAC version)I can send remote packets in XCTU. ALL functions in XCTU work with this XBEE. When I use coolterm to connect to the xbee I cannot ente… --- ## [Is there a way to send a command to remote X4 gateway with out using device cloud](https://forums.digi.com/t/is-there-a-way-to-send-a-command-to-remote-x4-gateway-with-out-using-device-cloud/12673)
**Author:** [@RCHOPPA](https://forums.digi.com/u/RCHOPPA)\ **Replies:** 1\ **Last updated:** [March 20, 2014, 11:31am UTC](https://forums.digi.com/t/is-there-a-way-to-send-a-command-to-remote-x4-gateway-with-out-using-device-cloud/12673 "2014-03-20T11:31:27Z")
--- ## [TS16 MEI cutting-off telnet commands after 16 characters](https://forums.digi.com/t/ts16-mei-cutting-off-telnet-commands-after-16-characters/12569)
**Author:** [@DrumFrog](https://forums.digi.com/u/DrumFrog)\ **Replies:** 1\ **Last updated:** [February 24, 2014, 8:54am UTC](https://forums.digi.com/t/ts16-mei-cutting-off-telnet-commands-after-16-characters/12569 "2014-02-24T08:54:27Z")
We are using PortServer TS 16 MEI in a test automation environment to send CLI commands to our devices under test. We observed that the Port server cuts-off our command sequences after 16 characters sporadically, by that… --- ## [Why I am receiving a route record indication?](https://forums.digi.com/t/why-i-am-receiving-a-route-record-indication/12308)
**Author:** [@renatogbp](https://forums.digi.com/u/renatogbp)\ **Replies:** 0\ **Last updated:** [December 19, 2013, 9:18am UTC](https://forums.digi.com/t/why-i-am-receiving-a-route-record-indication/12308 "2013-12-19T09:18:45Z")
Hi all, I am sending a Remote AT Command Request (0x17) to configure the sample rate (IR) to 1 second (0x03E8) using the following frame: 7E 00 11 17 00 00 13 A2 00 40 AA D0 06 FF FE 02 49 (‘I’) 52 (‘R’) 03 E8 … --- ## [API Remote AT Command Request](https://forums.digi.com/t/api-remote-at-command-request/11899)
**Author:** [@ttesis](https://forums.digi.com/u/ttesis)\ **Replies:** 1\ **Last updated:** [September 28, 2013, 7:55am UTC](https://forums.digi.com/t/api-remote-at-command-request/11899 "2013-09-28T07:55:11Z")
Hi, I am studying the book, ‘wireless sensor networks’ written by Oreilly. The code is for lighting sensor with feedback. Remote LED lights if remoteindicator’s status is changed. I am wondering how the remote LED turn… --- ## [How to request a single pin status](https://forums.digi.com/t/how-to-request-a-single-pin-status/11557)
**Author:** [@CodeMedic42](https://forums.digi.com/u/CodeMedic42)\ **Replies:** 4\ **Last updated:** [August 12, 2013, 5:52pm UTC](https://forums.digi.com/t/how-to-request-a-single-pin-status/11557 "2013-08-12T17:52:19Z")
I have an xbee set up to remotely control an object outdoors. I have it connected to a battery and a solar panel. I want to monitor the charge of the battery and the simplest way I have come up with is to read the voltag… --- ## [Could somebody send me the AT command list supported for Xstick 802.15.4?](https://forums.digi.com/t/could-somebody-send-me-the-at-command-list-supported-for-xstick-802-15-4/11783)
**Author:** [@Andreina](https://forums.digi.com/u/Andreina)\ **Replies:** 4\ **Last updated:** [July 31, 2013, 8:49am UTC](https://forums.digi.com/t/could-somebody-send-me-the-at-command-list-supported-for-xstick-802-15-4/11783 "2013-07-31T08:49:05Z")
--- ## [Current Command Reference Table for XBP98-XCWT-001 Modules ?](https://forums.digi.com/t/current-command-reference-table-for-xbp98-xcwt-001-modules/11510)
**Author:** [@Rick\_Eis](https://forums.digi.com/u/Rick_Eis)\ **Replies:** 1\ **Last updated:** [June 7, 2013, 11:25am UTC](https://forums.digi.com/t/current-command-reference-table-for-xbp98-xcwt-001-modules/11510 "2013-06-07T11:25:00Z")
Is this the latest command reference table for these modules ftp://ftp1.digi.com/support/documentation/90000938\_C.pdf ? Thanks for your help? Rick