# \#console **URL:** https://forums.digi.com/tag/console/43.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [What is the purpose of the "Open Console" button in the Action section for a device in Remote Manager?](https://forums.digi.com/t/what-is-the-purpose-of-the-open-console-button-in-the-action-section-for-a-device-in-remote-manager/23124)
**Author:** [@m4l490n](https://forums.digi.com/u/m4l490n)\ **Replies:** 2\ **Last updated:** [June 22, 2022, 11:07am UTC](https://forums.digi.com/t/what-is-the-purpose-of-the-open-console-button-in-the-action-section-for-a-device-in-remote-manager/23124 "2022-06-22T11:07:33Z")
A web-based terminal is opened when I click on the “Open Console” button on the “Action” section for a device. The thing is that this console seems to be useless. It doesn’t respond to any Linux console commands. I tried… --- ## [How can I access Digi CM 32 device from outside the subnet](https://forums.digi.com/t/how-can-i-access-digi-cm-32-device-from-outside-the-subnet/22788)
**Author:** [@morlou](https://forums.digi.com/u/morlou)\ **Replies:** 0\ **Last updated:** [November 10, 2021, 11:39am UTC](https://forums.digi.com/t/how-can-i-access-digi-cm-32-device-from-outside-the-subnet/22788 "2021-11-10T11:39:19Z")
Greetings, we have a Digi CM 32 for which we had to change the IP address and once it was done we lost access to it. After a factory reset and configuring the IP address, default gateway and subnet mask I was able to ssh… --- ## [Console connection to EL-16](https://forums.digi.com/t/console-connection-to-el-16/22560)
**Author:** [@msstreysgrun](https://forums.digi.com/u/msstreysgrun)\ **Replies:** 0\ **Last updated:** [July 20, 2021, 10:22am UTC](https://forums.digi.com/t/console-connection-to-el-16/22560 "2021-07-20T10:22:57Z")
I’m trying to establish a connection to a Digi-term EL-16 via port 1 in accordance with the following instructions: Activating the Boot Console Serial Cable required: To gain access to the Boot Console, you will need … --- ## [Initial console to DIGI, portserver II/16. what is the cable pinout?](https://forums.digi.com/t/initial-console-to-digi-portserver-ii-16-what-is-the-cable-pinout/16624)
**Author:** [@dfekigjkh](https://forums.digi.com/u/dfekigjkh)\ **Replies:** 13\ **Last updated:** [April 21, 2021, 4:05pm UTC](https://forums.digi.com/t/initial-console-to-digi-portserver-ii-16-what-is-the-cable-pinout/16624 "2021-04-21T16:05:07Z")
I have a home-grown “datacenter” of mixed devices, SUN/AIX/HP/Cisco/Adtran/Juniper, etc. I bought 2 Digi Portserver II 16 so I could reduce the cable clutter. I checked the manuals for console connectivity on initial set… --- ## [How to disable SSLv3 and TLSv1 protocols in Digi CM 48 Dual Power device for HTTPS access](https://forums.digi.com/t/how-to-disable-sslv3-and-tlsv1-protocols-in-digi-cm-48-dual-power-device-for-https-access/21911)
**Author:** [@RajeshP](https://forums.digi.com/u/RajeshP)\ **Replies:** 0\ **Last updated:** [October 21, 2020, 10:53am UTC](https://forums.digi.com/t/how-to-disable-sslv3-and-tlsv1-protocols-in-digi-cm-48-dual-power-device-for-https-access/21911 "2020-10-21T10:53:38Z")
How to disable SSLv3 and TLSv1 protocols in Digi CM 48 Dual Power device for HTTPS access --- ## [How to automated firmware update on Connectcore 6UL in manufacturing testjig?](https://forums.digi.com/t/how-to-automated-firmware-update-on-connectcore-6ul-in-manufacturing-testjig/20241)
**Author:** [@andreastaran](https://forums.digi.com/u/andreastaran)\ **Replies:** 0\ **Last updated:** [February 8, 2019, 11:58am UTC](https://forums.digi.com/t/how-to-automated-firmware-update-on-connectcore-6ul-in-manufacturing-testjig/20241 "2019-02-08T11:58:58Z")
Hi, We need a means to automate upgrading the Connectcore 6UL module firmware to our custom firmware images (u-boot, Linux, rootfs) during first boot in manufacturing testjig. One approache would be to: Connect conso… --- ## [Cannot connect to Digi CM products with recent browser versions](https://forums.digi.com/t/cannot-connect-to-digi-cm-products-with-recent-browser-versions/19781)
**Author:** [@hraffensperger](https://forums.digi.com/u/hraffensperger)\ **Replies:** 0\ **Last updated:** [August 13, 2018, 10:25am UTC](https://forums.digi.com/t/cannot-connect-to-digi-cm-products-with-recent-browser-versions/19781 "2018-08-13T10:25:49Z")
Currently running F/W Ver 1.9.5.3 on CM48 devices. Recently deployed browsers can no longer connect to these devices. Browser shows connection errors or connection reset errors when using HTTPS. Some browsers won’t co… --- ## [After I SSH into a Digi CM 48 how do I console into another machine?](https://forums.digi.com/t/after-i-ssh-into-a-digi-cm-48-how-do-i-console-into-another-machine/19084)
**Author:** [@Newbie1234567](https://forums.digi.com/u/Newbie1234567)\ **Replies:** 0\ **Last updated:** [January 25, 2018, 9:31am UTC](https://forums.digi.com/t/after-i-ssh-into-a-digi-cm-48-how-do-i-console-into-another-machine/19084 "2018-01-25T09:31:37Z")
I have inherited a Digi CM 48 on my network. After I SSH into the box how do I console into the connected machines? --- ## [Configure escape key](https://forums.digi.com/t/configure-escape-key/19042)
**Author:** [@pdukich](https://forums.digi.com/u/pdukich)\ **Replies:** 0\ **Last updated:** [January 3, 2018, 2:02pm UTC](https://forums.digi.com/t/configure-escape-key/19042 "2018-01-03T14:02:08Z")
We have a hub/spoke type of DIGI setup. Home office has (Digi Home) and remote sites are DIGI’s 2,3,4,etc. We are looking to SSH to DIGI Home and then modem to DIGI’s 2,3,4,etc. We are able to SSH to DIGI Home and mod… --- ## [Portserver TS to Cisco Console](https://forums.digi.com/t/portserver-ts-to-cisco-console/18417)
**Author:** [@ktemplin](https://forums.digi.com/u/ktemplin)\ **Replies:** 0\ **Last updated:** [June 2, 2017, 9:11am UTC](https://forums.digi.com/t/portserver-ts-to-cisco-console/18417 "2017-06-02T09:11:49Z")
I am attempting to use a Digi Portserver TS MEI to connect to a Cisco switch’s console port. This would replace the well known powder blue cable. I am using RS232 dip switch settings. I have a lot of Digi RJ45 10 Pin … --- ## [Can I connect the console of a DIGI to a RJ-45 serial port on another DIGI?](https://forums.digi.com/t/can-i-connect-the-console-of-a-digi-to-a-rj-45-serial-port-on-another-digi/18379)
**Author:** [@karthik537](https://forums.digi.com/u/karthik537)\ **Replies:** 0\ **Last updated:** [May 23, 2017, 1:15pm UTC](https://forums.digi.com/t/can-i-connect-the-console-of-a-digi-to-a-rj-45-serial-port-on-another-digi/18379 "2017-05-23T13:15:00Z")
May I know if it is possible to connect the CONSOLE of a DIGI CM 48 to a RJ-45 serial port of another DIGI? If so, may I know which kind of cable/adapter should be used? //Karteek --- ## [xbee s2c cordinator console double color issue](https://forums.digi.com/t/xbee-s2c-cordinator-console-double-color-issue/18122)
**Author:** [@oggy](https://forums.digi.com/u/oggy)\ **Replies:** 1\ **Last updated:** [March 8, 2017, 2:09pm UTC](https://forums.digi.com/t/xbee-s2c-cordinator-console-double-color-issue/18122 "2017-03-08T14:09:24Z")
Hi all I set up 2 zigbee s2c modules on at mode and define coordinator at one device. at the console i can send from end device to coordinator however when i write something at the coordinator side written letters repea… --- ## [How can i force the timeout to change](https://forums.digi.com/t/how-can-i-force-the-timeout-to-change/17602)
**Author:** [@Bdoydie](https://forums.digi.com/u/Bdoydie)\ **Replies:** 0\ **Last updated:** [October 27, 2016, 10:43am UTC](https://forums.digi.com/t/how-can-i-force-the-timeout-to-change/17602 "2016-10-27T10:43:43Z")
I’ve tried changing both inactivity timeouts on my console servers, but for some reason every time i try to change host mode configuration timeout, it reset back to 100 secs immediately --- ## [Connecting Digi Etherlite 160 and Digi CM 16 to acces Etherlite Boot Console](https://forums.digi.com/t/connecting-digi-etherlite-160-and-digi-cm-16-to-acces-etherlite-boot-console/17163)
**Author:** [@ebobsza](https://forums.digi.com/u/ebobsza)\ **Replies:** 2\ **Last updated:** [August 1, 2016, 12:57pm UTC](https://forums.digi.com/t/connecting-digi-etherlite-160-and-digi-cm-16-to-acces-etherlite-boot-console/17163 "2016-08-01T12:57:02Z")
Connecting Digi Etherlite 160 and Digi CM 16 to acces Etherlite Boot Console. What are the proper RJ-45 cabling and console settings on Digi CM 16? Thanks in advance --- ## [How to get response of Xbee 802.15.4 on Linux console](https://forums.digi.com/t/how-to-get-response-of-xbee-802-15-4-on-linux-console/16975)
**Author:** [@Junsu\_Kim](https://forums.digi.com/u/Junsu_Kim)\ **Replies:** 5\ **Last updated:** [July 8, 2016, 10:59am UTC](https://forums.digi.com/t/how-to-get-response-of-xbee-802-15-4-on-linux-console/16975 "2016-07-08T10:59:26Z")
I am dealing with 2 Xbee 802.15.4 module. one module is being used on usb explorer with Ubuntu another module is on breadboard two modules are using API mode (2) They can communicate on X-CTU so I made simple commun… --- ## [Digi passport serial timeout](https://forums.digi.com/t/digi-passport-serial-timeout/13088)
**Author:** [@JamesNB](https://forums.digi.com/u/JamesNB)\ **Replies:** 2\ **Last updated:** [November 4, 2015, 1:36pm UTC](https://forums.digi.com/t/digi-passport-serial-timeout/13088 "2015-11-04T13:36:33Z")
I have a Digi Passport and regardless of what I set for the serial port timeout it’s timing serial connections out after 100 seconds, which is really annoying. I’ve tried 0 and 3600 and rebooted a bunch of times. I’ve … --- ## [How do I determine the current firmware version for CM 48](https://forums.digi.com/t/how-do-i-determine-the-current-firmware-version-for-cm-48/15139)
**Author:** [@banderson1962](https://forums.digi.com/u/banderson1962)\ **Replies:** 1\ **Last updated:** [October 15, 2015, 10:52am UTC](https://forums.digi.com/t/how-do-i-determine-the-current-firmware-version-for-cm-48/15139 "2015-10-15T10:52:18Z")
--- ## [How disconnect from console session via modem](https://forums.digi.com/t/how-disconnect-from-console-session-via-modem/15474)
**Author:** [@cciebit](https://forums.digi.com/u/cciebit)\ **Replies:** 1\ **Last updated:** [September 29, 2015, 4:06pm UTC](https://forums.digi.com/t/how-disconnect-from-console-session-via-modem/15474 "2015-09-29T16:06:36Z")
How can I disconnect from Terminal (PortServer TS 8 is installed on remote location) I’m getting access to PortServer via telnet-\> modem dial-out. I cannot send telnet escape character “^\]” --- ## [How do I upgrade openSSH on Digi CM 48](https://forums.digi.com/t/how-do-i-upgrade-openssh-on-digi-cm-48/15141)
**Author:** [@banderson1962](https://forums.digi.com/u/banderson1962)\ **Replies:** 2\ **Last updated:** [August 4, 2015, 11:21pm UTC](https://forums.digi.com/t/how-do-i-upgrade-openssh-on-digi-cm-48/15141 "2015-08-04T23:21:37Z")
--- ## [Any serious issues with used CM 32 50000838-005?](https://forums.digi.com/t/any-serious-issues-with-used-cm-32-50000838-005/15200)
**Author:** [@dcundiff](https://forums.digi.com/u/dcundiff)\ **Replies:** 1\ **Last updated:** [July 30, 2015, 11:24am UTC](https://forums.digi.com/t/any-serious-issues-with-used-cm-32-50000838-005/15200 "2015-07-30T11:24:21Z")
Hello, I’m looking at some used Digi CM 32 model 50000838-005. I see that the current model is 70001908. I’m just looking to use them for emergency serial access to Linux servers. Are there any major issues with the old… --- ## [Need help configuring PortServer II access to Linux console on i.MX53](https://forums.digi.com/t/need-help-configuring-portserver-ii-access-to-linux-console-on-i-mx53/14982)
**Author:** [@aziff](https://forums.digi.com/u/aziff)\ **Replies:** 3\ **Last updated:** [July 23, 2015, 3:32pm UTC](https://forums.digi.com/t/need-help-configuring-portserver-ii-access-to-linux-console-on-i-mx53/14982 "2015-07-23T15:32:18Z")
I am using a PortServer ll (fairly certain “without RealPort”) I am trying to connect to console of i.MX53 board running Ubuntu Linux. I have verified the board powers, runs U-boot then boots Linux. All the console traf… --- ## [How do I setup serial connection to CISCO switch](https://forums.digi.com/t/how-do-i-setup-serial-connection-to-cisco-switch/15079)
**Author:** [@stever62](https://forums.digi.com/u/stever62)\ **Replies:** 1\ **Last updated:** [July 6, 2015, 11:08pm UTC](https://forums.digi.com/t/how-do-i-setup-serial-connection-to-cisco-switch/15079 "2015-07-06T23:08:02Z")
I would like to connect a realport to a cisco switch. I have a roll-over rj45 to rj45 which is what is used for a physical serial port. However, when using that cable a window opens that remains black. --- ## [Configuration of ospf.conf via serial console](https://forums.digi.com/t/configuration-of-ospf-conf-via-serial-console/14867)
**Author:** [@towdie](https://forums.digi.com/u/towdie)\ **Replies:** 1\ **Last updated:** [May 22, 2015, 8:55am UTC](https://forums.digi.com/t/configuration-of-ospf-conf-via-serial-console/14867 "2015-05-22T08:55:26Z")
Hello, we need to configure many routers at same time so we are using generated configs and paste them via serial console. As we need to use also OSPF, is there any possibility to configure/edit/transfer ospf.conf file… --- ## [wirelessly save console session through arduino](https://forums.digi.com/t/wirelessly-save-console-session-through-arduino/14737)
**Author:** [@eleceng](https://forums.digi.com/u/eleceng)\ **Replies:** 1\ **Last updated:** [April 27, 2015, 11:18am UTC](https://forums.digi.com/t/wirelessly-save-console-session-through-arduino/14737 "2015-04-27T11:18:59Z")
Does anybody know of a way to save the console session on xctu through programming with the arduino. I’ve built a wireless sensor using arduino uno, 2x XBee series 2, xbee usb adapter and xbee shield. THANKSS --- ## [trying to import the config to CM 16 from FC It detects the card,selection for import from FC not working.](https://forums.digi.com/t/trying-to-import-the-config-to-cm-16-from-fc-it-detects-the-card-selection-for-import-from-fc-not-working/14485)
**Author:** [@adarovsky](https://forums.digi.com/u/adarovsky)\ **Replies:** 0\ **Last updated:** [March 5, 2015, 2:04pm UTC](https://forums.digi.com/t/trying-to-import-the-config-to-cm-16-from-fc-it-detects-the-card-selection-for-import-from-fc-not-working/14485 "2015-03-05T14:04:18Z")
digi --- ## [Digi CM 16 works with switches, pdus, no output from IBM x3550 M4 hosts. I think I need specific settings in the BIOS.](https://forums.digi.com/t/digi-cm-16-works-with-switches-pdus-no-output-from-ibm-x3550-m4-hosts-i-think-i-need-specific-settings-in-the-bios/14304)
**Author:** [@bobster151](https://forums.digi.com/u/bobster151)\ **Replies:** 3\ **Last updated:** [February 17, 2015, 12:03pm UTC](https://forums.digi.com/t/digi-cm-16-works-with-switches-pdus-no-output-from-ibm-x3550-m4-hosts-i-think-i-need-specific-settings-in-the-bios/14304 "2015-02-17T12:03:58Z")
--- ## [Can't communicate to Digi WR44RR flashing LED](https://forums.digi.com/t/cant-communicate-to-digi-wr44rr-flashing-led/14279)
**Author:** [@elmer.yalung](https://forums.digi.com/u/elmer.yalung)\ **Replies:** 1\ **Last updated:** [February 2, 2015, 3:13am UTC](https://forums.digi.com/t/cant-communicate-to-digi-wr44rr-flashing-led/14279 "2015-02-02T03:13:34Z")
I was doing flashwriter then suddenly show tftp failed so i reset the transport Digi then suddenly flashing LED at the front looks like the file im uploading was corrupted. Is there a way to communicate to Digi WR44RR … --- ## [What is the pinout to connect the console port of UTM FortiGate 1000c](https://forums.digi.com/t/what-is-the-pinout-to-connect-the-console-port-of-utm-fortigate-1000c/13907)
**Author:** [@kovedderstarnell](https://forums.digi.com/u/kovedderstarnell)\ **Replies:** 4\ **Last updated:** [December 16, 2014, 5:46pm UTC](https://forums.digi.com/t/what-is-the-pinout-to-connect-the-console-port-of-utm-fortigate-1000c/13907 "2014-12-16T17:46:10Z")
UTM Fortinet Model: FortiGate 1000c --- ## [What adapters should we use for Sonicwall and Nortel Switches on the Digi CM-48?](https://forums.digi.com/t/what-adapters-should-we-use-for-sonicwall-and-nortel-switches-on-the-digi-cm-48/13706)
**Author:** [@infinisource](https://forums.digi.com/u/infinisource)\ **Replies:** 1\ **Last updated:** [October 13, 2014, 11:55am UTC](https://forums.digi.com/t/what-adapters-should-we-use-for-sonicwall-and-nortel-switches-on-the-digi-cm-48/13706 "2014-10-13T11:55:44Z")
We have SonicWall Firewalls and Nortel Switches, both have different connectors for the console ports. The SonicWall’s have an RJ45 to DB9-F cable but the supplied DB-9M to RJ45 cable does not work with the Digi CM-48. … --- ## [console cable RJ45 TO DB9 - Pinout](https://forums.digi.com/t/console-cable-rj45-to-db9-pinout/12603)
**Author:** [@ahgio](https://forums.digi.com/u/ahgio)\ **Replies:** 2\ **Last updated:** [September 17, 2014, 10:00am UTC](https://forums.digi.com/t/console-cable-rj45-to-db9-pinout/12603 "2014-09-17T10:00:36Z")
Hi , I have a digi ts portsrever 16 I want to config it from a PC with console but i do not have the console cable . what is the rj45 to DB9 pinout of the cable ? what port do i need to connect it ? can i use a… [Next page](https://forums.digi.com/tag/console/43.md?match_all_tags=true&page=1&tags%5B%5D=console)