# \#default

**URL:** https://forums.digi.com/tag/default/320.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [AnywhereUSB 2 Plus. Invalid root password.](https://forums.digi.com/t/anywhereusb-2-plus-invalid-root-password/22872)

<div class="topic-metadata">

**Author:** [@Nortmn](https://forums.digi.com/u/Nortmn)\
**Replies:** 2\
**Last updated:** [December 20, 2022, 11:05am UTC](https://forums.digi.com/t/anywhereusb-2-plus-invalid-root-password/22872 "2022-12-20T11:05:20Z")

</div>

Hi. I can’t log into Web UI AnywhereUSB 2 Plus using root and the default password from the label. Can I somehow reset the password or find out the correct one?

---

## [connecting via IP](https://forums.digi.com/t/connecting-via-ip/22672)

<div class="topic-metadata">

**Author:** [@AriaChloe](https://forums.digi.com/u/AriaChloe)\
**Replies:** 2\
**Last updated:** [September 23, 2021, 8:39am UTC](https://forums.digi.com/t/connecting-via-ip/22672 "2021-09-23T08:39:38Z")

</div>

Hi! I require some help for connecting via IP and tester. When positioning the IP , I have to set to detection ranges , meanwhile I face an issue a page shows up with the requirement of code word and username. If someo…

---

## [default subnet mask and gateway addresses](https://forums.digi.com/t/default-subnet-mask-and-gateway-addresses/22140)

<div class="topic-metadata">

**Author:** [@rbanuelos](https://forums.digi.com/u/rbanuelos)\
**Replies:** 0\
**Last updated:** [January 19, 2021, 12:14pm UTC](https://forums.digi.com/t/default-subnet-mask-and-gateway-addresses/22140 "2021-01-19T12:14:43Z")

</div>

---

## [Default password Anywhereusb/14?](https://forums.digi.com/t/default-password-anywhereusb-14/11411)

<div class="topic-metadata">

**Author:** [@Christopher\_Bohlin](https://forums.digi.com/u/Christopher_Bohlin)\
**Replies:** 5\
**Last updated:** [January 4, 2021, 2:55am UTC](https://forums.digi.com/t/default-password-anywhereusb-14/11411 "2021-01-04T02:55:30Z")

</div>

Hello What’s the default password for browsing the AnywhereUSB/14 in webbrowser? Can’t find it! /Christopher

---

## [iap default ip](https://forums.digi.com/t/iap-default-ip/22029)

<div class="topic-metadata">

**Author:** [@fullmanido](https://forums.digi.com/u/fullmanido)\
**Replies:** 1\
**Last updated:** [December 4, 2020, 1:32pm UTC](https://forums.digi.com/t/iap-default-ip/22029 "2020-12-04T13:32:44Z")

</div>

What is the default IP for the DigiOne IAP? I have tried the 192.168.1.100 and 192.168.1.20 also with crossover cable.

---

## [ppp1 not deactivating when Eth0 comes up WR21\[SOLVED\]](https://forums.digi.com/t/ppp1-not-deactivating-when-eth0-comes-up-wr21-solved/21977)

<div class="topic-metadata">

**Author:** [@jserink](https://forums.digi.com/u/jserink)\
**Replies:** 2\
**Last updated:** [November 19, 2020, 3:11am UTC](https://forums.digi.com/t/ppp1-not-deactivating-when-eth0-comes-up-wr21-solved/21977 "2020-11-19T03:11:28Z")

</div>

Hello All: My System: Model: WR21 Part Number: WR21-M72B-DE1-SB Ethernet 0 MAC Address: 00:04:2d:0e:2c:96 Serial: 928918 Firmware Version: 8.1.0.1 (Apr 13 2020 11:28:09) SBIOS Version: 7.67u Build Ver…

---

## [Link fail over\[SOLVED\]](https://forums.digi.com/t/link-fail-over-solved/21646)

<div class="topic-metadata">

**Author:** [@jserink](https://forums.digi.com/u/jserink)\
**Replies:** 3\
**Last updated:** [September 9, 2020, 3:57am UTC](https://forums.digi.com/t/link-fail-over-solved/21646 "2020-09-09T03:57:50Z")

</div>

Hi All: I have followed AN14 for dual SIM failover and that is working fine. We have some sites that have Fiber or ADSL so I want to put the WR21 in port isolate mode and have Eth0 connected to the local instrumentation…

---

## [Finding the IP address of the WR44R](https://forums.digi.com/t/finding-the-ip-address-of-the-wr44r/20898)

<div class="topic-metadata">

**Author:** [@jserink](https://forums.digi.com/u/jserink)\
**Replies:** 3\
**Last updated:** [November 22, 2019, 3:10pm UTC](https://forums.digi.com/t/finding-the-ip-address-of-the-wr44r/20898 "2019-11-22T15:10:24Z")

</div>

Hello: I have a brand new WR44R that is not answering pings on 192.168.1.1. But it appears that the WR44R has not HW reset button? So how do I find out the router’s IP address? Suggestions? Cheers, John

---

## [Help! What is the factory default IP address for the DC-ME-Y-402-C (ME 9210)?](https://forums.digi.com/t/help-what-is-the-factory-default-ip-address-for-the-dc-me-y-402-c-me-9210/17059)

<div class="topic-metadata">

**Author:** [@thilleary](https://forums.digi.com/u/thilleary)\
**Replies:** 3\
**Last updated:** [November 15, 2019, 7:20am UTC](https://forums.digi.com/t/help-what-is-the-factory-default-ip-address-for-the-dc-me-y-402-c-me-9210/17059 "2019-11-15T07:20:48Z")

</div>

We are trying to activate a dig ME 9210 module in all of our products. The support documentation states: “If the device to which you will be issuing commands has not already been assigned an IP address, or if the IP add…

---

## [What are the Digi One IA default settings?](https://forums.digi.com/t/what-are-the-digi-one-ia-default-settings/20085)

<div class="topic-metadata">

**Author:** [@Ivan\_P](https://forums.digi.com/u/Ivan_P)\
**Replies:** 0\
**Last updated:** [December 21, 2018, 2:39pm UTC](https://forums.digi.com/t/what-are-the-digi-one-ia-default-settings/20085 "2018-12-21T14:39:27Z")

</div>

What are the Digi One IA default settings? S/N (S) V24126799

---

## [What does the reset pin(PIN 5) on the XBee S1 do? Will it restore it to default settings?](https://forums.digi.com/t/what-does-the-reset-pin-pin-5-on-the-xbee-s1-do-will-it-restore-it-to-default-settings/15538)

<div class="topic-metadata">

**Author:** [@ashwin\_nair](https://forums.digi.com/u/ashwin_nair)\
**Replies:** 2\
**Last updated:** [June 26, 2018, 11:51am UTC](https://forums.digi.com/t/what-does-the-reset-pin-pin-5-on-the-xbee-s1-do-will-it-restore-it-to-default-settings/15538 "2018-06-26T11:51:46Z")

</div>

What does the reset pin(PIN 5) on the XBee S1 do? Will it restore it to default settings? AN

---

## [Where is the configuration saved ? Is it in eeprom ?](https://forums.digi.com/t/where-is-the-configuration-saved-is-it-in-eeprom/19402)

<div class="topic-metadata">

**Author:** [@ranchu](https://forums.digi.com/u/ranchu)\
**Replies:** 0\
**Last updated:** [April 24, 2018, 11:10am UTC](https://forums.digi.com/t/where-is-the-configuration-saved-is-it-in-eeprom/19402 "2018-04-24T11:10:44Z")

</div>

Hello, When purchasing a new xbee, is it configured to use “transparent mode” by default (or “api mode” or escape mode") ? I see in datasheet: 1 - 2 1 = API-enabled 2 = API-enabled (w/escaped control characters…

---

## [What is the default radio configuration of programmable xbees](https://forums.digi.com/t/what-is-the-default-radio-configuration-of-programmable-xbees/18150)

<div class="topic-metadata">

**Author:** [@herrmattoon](https://forums.digi.com/u/herrmattoon)\
**Replies:** 2\
**Last updated:** [March 16, 2017, 3:46am UTC](https://forums.digi.com/t/what-is-the-default-radio-configuration-of-programmable-xbees/18150 "2017-03-16T03:46:55Z")

</div>

Hi all, I want to load a code into my programmable xbee devices over the air. For this purpose, I need to see them in XCTU, so that I can configure them as router, transparent mode, to use the XMODEM protocol. My probl…

---

## [Where can I get the Digi Connect Programmer for this device.](https://forums.digi.com/t/where-can-i-get-the-digi-connect-programmer-for-this-device/15760)

<div class="topic-metadata">

**Author:** [@jimdatsun](https://forums.digi.com/u/jimdatsun)\
**Replies:** 3\
**Last updated:** [July 1, 2016, 3:09am UTC](https://forums.digi.com/t/where-can-i-get-the-digi-connect-programmer-for-this-device/15760 "2016-07-01T03:09:00Z")

</div>

Where can i purchase or download the Digi Connect Programmer for this custom device?

---

## [What are the default settings for XBee wall router?](https://forums.digi.com/t/what-are-the-default-settings-for-xbee-wall-router/15024)

<div class="topic-metadata">

**Author:** [@alanp](https://forums.digi.com/u/alanp)\
**Replies:** 2\
**Last updated:** [June 30, 2016, 10:34am UTC](https://forums.digi.com/t/what-are-the-default-settings-for-xbee-wall-router/15024 "2016-06-30T10:34:26Z")

</div>

Hi, I have a couple of new wall routers but they don’t seem to be connecting to my Zigbee network. Assoc light keeps flashing and can’t see it in XCTU Can someone tell me default settings of routers please. I’ll then…

---

## [PortServer TS 4 MEI Resets to default on power cycle.](https://forums.digi.com/t/portserver-ts-4-mei-resets-to-default-on-power-cycle/16666)

<div class="topic-metadata">

**Author:** [@Aaron\_T](https://forums.digi.com/u/Aaron_T)\
**Replies:** 3\
**Last updated:** [April 29, 2016, 7:32am UTC](https://forums.digi.com/t/portserver-ts-4-mei-resets-to-default-on-power-cycle/16666 "2016-04-29T07:32:05Z")

</div>

I am currently using a number of Portserver TS 4 MEI servers on submersible camera platforms, which get regularly power cycled. On irregular occasions, the units will power on having reset all settings to default expect …

---

## [Digi wr router listening on random high tcp ports by default](https://forums.digi.com/t/digi-wr-router-listening-on-random-high-tcp-ports-by-default/15265)

<div class="topic-metadata">

**Author:** [@chillobill](https://forums.digi.com/u/chillobill)\
**Replies:** 1\
**Last updated:** [August 13, 2015, 10:44am UTC](https://forums.digi.com/t/digi-wr-router-listening-on-random-high-tcp-ports-by-default/15265 "2015-08-13T10:44:27Z")

</div>

I have just installed a digi wr11 router using the default configuration and found that on the internal interface on the device is listening on 26 different ports. Seems strange to me that this is default beheiviour, I w…

---

## [Default username/password for an old Sarian MR4110](https://forums.digi.com/t/default-username-password-for-an-old-sarian-mr4110/14944)

<div class="topic-metadata">

**Author:** [@kjwkjw](https://forums.digi.com/u/kjwkjw)\
**Replies:** 1\
**Last updated:** [June 9, 2015, 4:29am UTC](https://forums.digi.com/t/default-username-password-for-an-old-sarian-mr4110/14944 "2015-06-09T04:29:35Z")

</div>

I have recently factory defaulted an old Sarian MR4110 and the normal default username/password combo of the same is not working. Does anyone have any idea what the default combo could be to access the webgui so that I …

---

## [Flash a new connect ME 9210 device and save default settings](https://forums.digi.com/t/flash-a-new-connect-me-9210-device-and-save-default-settings/13546)

<div class="topic-metadata">

**Author:** [@lieven](https://forums.digi.com/u/lieven)\
**Replies:** 3\
**Last updated:** [February 11, 2015, 5:33am UTC](https://forums.digi.com/t/flash-a-new-connect-me-9210-device-and-save-default-settings/13546 "2015-02-11T05:33:53Z")

</div>

Hi, In the config files I have modified some settings, like the root password in “appconfig.h”. When flashing a new device, the old settings from NVRAM are still used. This seems normal, but how can I instruct it once …

---

## [xctu doesn't set xbee back to default setting](https://forums.digi.com/t/xctu-doesnt-set-xbee-back-to-default-setting/13658)

<div class="topic-metadata">

**Author:** [@rkdtlsdnr102](https://forums.digi.com/u/rkdtlsdnr102)\
**Replies:** 1\
**Last updated:** [October 8, 2014, 5:33pm UTC](https://forums.digi.com/t/xctu-doesnt-set-xbee-back-to-default-setting/13658 "2014-10-08T17:33:17Z")

</div>

Hi, Im new to xbee and i know that if i set destination low, high to zero on the ‘end device’ side, it will only communicate with coordinator. I accidentally set end device side destination address low and high into diff…

---

## [Set to default settings](https://forums.digi.com/t/set-to-default-settings/12567)

<div class="topic-metadata">

**Author:** [@roelmeijer](https://forums.digi.com/u/roelmeijer)\
**Replies:** 2\
**Last updated:** [September 19, 2014, 6:57am UTC](https://forums.digi.com/t/set-to-default-settings/12567 "2014-09-19T06:57:12Z")

</div>

Dear, Hi have a anyhereUSB/5 device and want to connect to the Web UI but its gray out. So I want to reset it to default settings. I have tray it with “Awrescue” but no results. Can you please help me to reset the dev…
