# \#discovery **URL:** https://forums.digi.com/tag/discovery/557.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Digi Device Discovery tool 'Error while saving the settings to the device operation timed out (code-2)'](https://forums.digi.com/t/digi-device-discovery-tool-error-while-saving-the-settings-to-the-device-operation-timed-out-code-2/23306)
**Author:** [@seungjae\_l\_lee](https://forums.digi.com/u/seungjae_l_lee)\ **Replies:** 1\ **Last updated:** [December 13, 2022, 9:13pm UTC](https://forums.digi.com/t/digi-device-discovery-tool-error-while-saving-the-settings-to-the-device-operation-timed-out-code-2/23306 "2022-12-13T21:13:22Z")
I installed port server LTS16 yesterday. When performing configure setting using the discovery utility, I insert the password and click OK. The following error message occurs. -\> Error while saving the settings to the… --- ## [Python device discovery](https://forums.digi.com/t/python-device-discovery/22583)
**Author:** [@Nelizalde](https://forums.digi.com/u/Nelizalde)\ **Replies:** 0\ **Last updated:** [August 3, 2021, 10:04am UTC](https://forums.digi.com/t/python-device-discovery/22583 "2021-08-03T10:04:30Z")
I have Digi connectport x2 ZB Ethernet and I want to make a program in python. This program have to discover the devices in the ethernet LAN. It has to do the same as the tool ‘Digi Device Discovery’ but in python. --- ## [AW-USB-2 is not detected and will not reset](https://forums.digi.com/t/aw-usb-2-is-not-detected-and-will-not-reset/21745)
**Author:** [@NX7U](https://forums.digi.com/u/NX7U)\ **Replies:** 0\ **Last updated:** [September 8, 2020, 8:22am UTC](https://forums.digi.com/t/aw-usb-2-is-not-detected-and-will-not-reset/21745 "2020-09-08T08:22:27Z")
AnywhereUSB 2, new to me. Connect power, slow green blink on status (ok). Ethernet link ok on AW-USB and at switch. But I can’t discover the device using either Digi Device Discovery utility or Anywhere USB Config Uti… --- ## [Close Advanced Digi Discovery Protocol Port](https://forums.digi.com/t/close-advanced-digi-discovery-protocol-port/19898)
**Author:** [@dragos1](https://forums.digi.com/u/dragos1)\ **Replies:** 3\ **Last updated:** [October 5, 2018, 1:49pm UTC](https://forums.digi.com/t/close-advanced-digi-discovery-protocol-port/19898 "2018-10-05T13:49:36Z")
Hello together, When I run Nmap I see that Advanced Digi Discovery Protocol Port 2362 is open and I want to close that port. Is that possible? I only found this: “You can enable or disable access to ADDP service, but… --- ## [XTCU can't discover local XBees](https://forums.digi.com/t/xtcu-cant-discover-local-xbees/18645)
**Author:** [@ewanderson](https://forums.digi.com/u/ewanderson)\ **Replies:** 8\ **Last updated:** [August 16, 2017, 2:25pm UTC](https://forums.digi.com/t/xtcu-cant-discover-local-xbees/18645 "2017-08-16T14:25:37Z")
I have 3 XBee-PRO 900HP modules and 3 grove development boards (I bought the DigiMesh kit). Initially XTCU was able to discover all of the modules when plugged into my usb ports, but then it stopped being able to discove… --- ## [Discovery of modules in a DigiMesh](https://forums.digi.com/t/discovery-of-modules-in-a-digimesh/18568)
**Author:** [@bremenpl](https://forums.digi.com/u/bremenpl)\ **Replies:** 10\ **Last updated:** [August 4, 2017, 12:19pm UTC](https://forums.digi.com/t/discovery-of-modules-in-a-digimesh/18568 "2017-08-04T12:19:40Z")
Hello there, In my application i am trying to implement network discovery functionality. I am working in a DigiMesh and I would like to find all nodes in the network. For testing purposes I have used XCTU with console c… --- ## [Ask about Node Discover?](https://forums.digi.com/t/ask-about-node-discover/18599)
**Author:** [@luzmartinez](https://forums.digi.com/u/luzmartinez)\ **Replies:** 1\ **Last updated:** [July 31, 2017, 10:03am UTC](https://forums.digi.com/t/ask-about-node-discover/18599 "2017-07-31T10:03:15Z")
I encountered some problems with node detection in a network. When I send a package like 7E 00 04 08 01 4E 44 64 sometimes it does not show or find all the buttons and this situation is not continuous. Are there any spec… --- ## [Gateway X4 (ZB + 3G) not found in Digi Device Discovery](https://forums.digi.com/t/gateway-x4-zb-3g-not-found-in-digi-device-discovery/18395)
**Author:** [@thiagorod](https://forums.digi.com/u/thiagorod)\ **Replies:** 3\ **Last updated:** [June 6, 2017, 10:29am UTC](https://forums.digi.com/t/gateway-x4-zb-3g-not-found-in-digi-device-discovery/18395 "2017-06-06T10:29:33Z")
The gateway is accessible via browser normally, but the Digi Device Discovery won´t find it. Firewall disabled. Connected through a router, that has been configured properly. Am I missing something? --- ## [Newer Rabbit is not discovered by Rabbit Field Utility](https://forums.digi.com/t/newer-rabbit-is-not-discovered-by-rabbit-field-utility/16272)
**Author:** [@PMartyniak](https://forums.digi.com/u/PMartyniak)\ **Replies:** 2\ **Last updated:** [March 2, 2016, 12:38am UTC](https://forums.digi.com/t/newer-rabbit-is-not-discovered-by-rabbit-field-utility/16272 "2016-03-02T00:38:05Z")
We have two batches of EG2110 Rabbit Link boards which have the Rabbit 2000 microprocessor. All of our older ones (PCB text: Copyright 2000 Z-World Inc, 175-0251 Rev A) work fine with the Rabbit Field Utility - they are… --- ## [How to find Connect Wi-ME ?!?](https://forums.digi.com/t/how-to-find-connect-wi-me/15758)
**Author:** [@Ioannes](https://forums.digi.com/u/Ioannes)\ **Replies:** 1\ **Last updated:** [November 12, 2015, 12:27pm UTC](https://forums.digi.com/t/how-to-find-connect-wi-me/15758 "2015-11-12T12:27:07Z")
How is it possible to detect a Connect Wi-ME if DIGI DISCOVERY does not detect it ? I have MAC. May I use them ? --- ## [on an API v2 packet between two xbee S2B's, get a discovery status of 0x43](https://forums.digi.com/t/on-an-api-v2-packet-between-two-xbee-s2bs-get-a-discovery-status-of-0x43/15288)
**Author:** [@hwestbrook](https://forums.digi.com/u/hwestbrook)\ **Replies:** 1\ **Last updated:** [August 31, 2015, 3:54pm UTC](https://forums.digi.com/t/on-an-api-v2-packet-between-two-xbee-s2bs-get-a-discovery-status-of-0x43/15288 "2015-08-31T15:54:53Z")
once in a while, when I send a packet to a pin sleeping end device from a route, I get a discovery status back with the hex 0x43. This is not in the manual. What does this status type mean? --- ## [Does Digi Device Discovery Utility run as is under Windows Embedded 7?](https://forums.digi.com/t/does-digi-device-discovery-utility-run-as-is-under-windows-embedded-7/14704)
**Author:** [@tremdez](https://forums.digi.com/u/tremdez)\ **Replies:** 6\ **Last updated:** [April 21, 2015, 9:12am UTC](https://forums.digi.com/t/does-digi-device-discovery-utility-run-as-is-under-windows-embedded-7/14704 "2015-04-21T09:12:14Z")
--- ## [How can I troubleshoot a Link between 2 XBee-868-Pro](https://forums.digi.com/t/how-can-i-troubleshoot-a-link-between-2-xbee-868-pro/14398)
**Author:** [@Bummibaer](https://forums.digi.com/u/Bummibaer)\ **Replies:** 3\ **Last updated:** [April 2, 2015, 8:12am UTC](https://forums.digi.com/t/how-can-i-troubleshoot-a-link-between-2-xbee-868-pro/14398 "2015-04-02T08:12:41Z")
I have one Xbee connected to the PC (XTCU) and the other one connected to a host processor. Both of them are in API Escaped Mode. The other parameters are on default. ID is 0x7FFF. I can send AT(08) commands to both o… --- ## [Node discovery API response format](https://forums.digi.com/t/node-discovery-api-response-format/14617)
**Author:** [@wz2b](https://forums.digi.com/u/wz2b)\ **Replies:** 4\ **Last updated:** [March 31, 2015, 1:15pm UTC](https://forums.digi.com/t/node-discovery-api-response-format/14617 "2015-03-31T13:15:05Z")
I made an xbee java library of my own, in part so that I could separate out xbee from non-xbee licensing issues; and in part because I wanted to have a library in maven with essentially zero external dependencies. It’s … --- ## [Node Discovery. What is the deafult content in the serial response?](https://forums.digi.com/t/node-discovery-what-is-the-deafult-content-in-the-serial-response/12570)
**Author:** [@maurolarrat](https://forums.digi.com/u/maurolarrat)\ **Replies:** 3\ **Last updated:** [March 30, 2015, 4:26am UTC](https://forums.digi.com/t/node-discovery-what-is-the-deafult-content-in-the-serial-response/12570 "2015-03-30T04:26:18Z")
Hello Friends. First: I have looked in this forum before asking and couldn’t find any topic about my question. In the AT mode, what is the default format for the AT ND command response? Here http://ftp1.digi.com/suppo… --- ## [How to sleep Xbee immediately](https://forums.digi.com/t/how-to-sleep-xbee-immediately/14058)
**Author:** [@hwong](https://forums.digi.com/u/hwong)\ **Replies:** 2\ **Last updated:** [December 10, 2014, 10:11pm UTC](https://forums.digi.com/t/how-to-sleep-xbee-immediately/14058 "2014-12-10T22:11:00Z")
We’ve written a program to get XBee to sleep using async pin sleep mode (SM=1). The XBee is working as expected most of the time (when sleep\_rq is asserted, the XBee will go into sleep mode after 1 tick (4ms)). Our prob… --- ## [Discovery and RTS DTR](https://forums.digi.com/t/discovery-and-rts-dtr/13741)
**Author:** [@Ispybadguys](https://forums.digi.com/u/Ispybadguys)\ **Replies:** 1\ **Last updated:** [October 30, 2014, 10:23am UTC](https://forums.digi.com/t/discovery-and-rts-dtr/13741 "2014-10-30T10:23:11Z")
I have two questions about using the Xbee digimesh. The first is that when I connect the rx an tx lines to an arduino this seems to prevent the discovery of the device connected to the arduino. If I disconnect the din li… --- ## [Digi discovery not finding Digi Connect ME](https://forums.digi.com/t/digi-discovery-not-finding-digi-connect-me/13613)
**Author:** [@Fernando\_Machado](https://forums.digi.com/u/Fernando_Machado)\ **Replies:** 2\ **Last updated:** [September 22, 2014, 11:55am UTC](https://forums.digi.com/t/digi-discovery-not-finding-digi-connect-me/13613 "2014-09-22T11:55:35Z")
Hi all, I have three Digi Connect ME one is used (is ok) and two out of the box (not working). The used one is (ok): MAC 00409D: 369648 PN:(1P) 50000878-1 T -S 95011130A And the news are (not working): MAC 00409D:… --- ## [Performing Network Discovery in SPI mode does not return the discovered remotes like the UART mode does.](https://forums.digi.com/t/performing-network-discovery-in-spi-mode-does-not-return-the-discovered-remotes-like-the-uart-mode-does/13492)
**Author:** [@lachlanp](https://forums.digi.com/u/lachlanp)\ **Replies:** 4\ **Last updated:** [September 2, 2014, 8:31am UTC](https://forums.digi.com/t/performing-network-discovery-in-spi-mode-does-not-return-the-discovered-remotes-like-the-uart-mode-does/13492 "2014-09-02T08:31:38Z")
When sending a Network Discovery command (ND) to the Xbee using a UART interface, it returns a response from the local device then one discovery response per discovered node. When I switch to SPI mode (which is the mode … --- ## [Network Discovery with XBee Series2 Modules](https://forums.digi.com/t/network-discovery-with-xbee-series2-modules/13371)
**Author:** [@MLeuker](https://forums.digi.com/u/MLeuker)\ **Replies:** 2\ **Last updated:** [August 21, 2014, 10:52am UTC](https://forums.digi.com/t/network-discovery-with-xbee-series2-modules/13371 "2014-08-21T10:52:35Z")
Hi all, I’m searching for a way to find ZigBee Networks with a Module that has not joined a Network. For example, I’ve setup a Network with 3 Modules (Router, End Device, Coordinator) and specifi the PAN ID and other pa… --- ## [node discovery](https://forums.digi.com/t/node-discovery/13140)
**Author:** [@mkl](https://forums.digi.com/u/mkl)\ **Replies:** 2\ **Last updated:** [June 17, 2014, 9:53am UTC](https://forums.digi.com/t/node-discovery/13140 "2014-06-17T09:53:14Z")
Hello, I’m using XBee and XBee-PRO’s ZB modules in network made of 1 coordinator and 4 end devices. There has been a weird messages loss problem and now I seem to have found the possible cause. The PC program talking t… --- ## [868LP transparent addressing - any alternative to ROM based src address?](https://forums.digi.com/t/868lp-transparent-addressing-any-alternative-to-rom-based-src-address/12526)
**Author:** [@DLT](https://forums.digi.com/u/DLT)\ **Replies:** 1\ **Last updated:** [May 8, 2014, 1:43pm UTC](https://forums.digi.com/t/868lp-transparent-addressing-any-alternative-to-rom-based-src-address/12526 "2014-05-08T13:43:59Z")
I am new to this forum - please forgive any “noob” questions… We have recently moved from a 2.4G Xbee to 868 (LP), using AT transparent point-to-point mode. On the 2.4G unit, we could set any arbitrary source address in… --- ## [Device Discovery Not Finding, but Hub Configuration It](https://forums.digi.com/t/device-discovery-not-finding-but-hub-configuration-it/12411)
**Author:** [@AlanWaggoner](https://forums.digi.com/u/AlanWaggoner)\ **Replies:** 1\ **Last updated:** [January 31, 2014, 6:22am UTC](https://forums.digi.com/t/device-discovery-not-finding-but-hub-configuration-it/12411 "2014-01-31T06:22:10Z")
I have a new USBAnywhere/2 . The initial setup worked fine from a Windows 7 PC. The device was going to be moved to a different subnet without DHCP, so I set a static IP address on the device for the new subnet. Moved… --- ## [AnyWhereUSB TS-44 device not found](https://forums.digi.com/t/anywhereusb-ts-44-device-not-found/12169)
**Author:** [@rick](https://forums.digi.com/u/rick)\ **Replies:** 1\ **Last updated:** [November 26, 2013, 11:57pm UTC](https://forums.digi.com/t/anywhereusb-ts-44-device-not-found/12169 "2013-11-26T23:57:30Z")
I have a new AnywhereUSB TS-44 fresh out of the box. The digi device discovery cannot find it. Its plugged into a switch and the switch link led is lit but the ethernet led’s on the digi are not lit (yellow/green). I… --- ## [Why must I Cycle Power on anywhereUSB14 for it to be discovered after a server power cycle?](https://forums.digi.com/t/why-must-i-cycle-power-on-anywhereusb14-for-it-to-be-discovered-after-a-server-power-cycle/12166)
**Author:** [@dcrouch](https://forums.digi.com/u/dcrouch)\ **Replies:** 1\ **Last updated:** [November 26, 2013, 11:55pm UTC](https://forums.digi.com/t/why-must-i-cycle-power-on-anywhereusb14-for-it-to-be-discovered-after-a-server-power-cycle/12166 "2013-11-26T23:55:18Z")
Scenario: My server and AnywhereUSB 14 are both powered down. The sever and AnywhereUSB are powered up at same time. The Server(a vmware ESX host) takes \> 10 minutes to fully startup and the virtual machines up and run… --- ## [Xbee Series 2 localization](https://forums.digi.com/t/xbee-series-2-localization/11972)
**Author:** [@Sad59](https://forums.digi.com/u/Sad59)\ **Replies:** 3\ **Last updated:** [November 13, 2013, 8:47am UTC](https://forums.digi.com/t/xbee-series-2-localization/11972 "2013-11-13T08:47:52Z")
Hi guys, Im playing with some Xbee’s modules. i made a small mesh network having 1 Coordinator + 1 Router + 1 End Device (All in API mode) I’am trying to track the EndDevice : 1- i used the node discovery command (ND) … --- ## [Resolving node identifier weirdness](https://forums.digi.com/t/resolving-node-identifier-weirdness/11732)
**Author:** [@arnuschky](https://forums.digi.com/u/arnuschky)\ **Replies:** 1\ **Last updated:** [September 29, 2013, 4:10pm UTC](https://forums.digi.com/t/resolving-node-identifier-weirdness/11732 "2013-09-29T16:10:33Z")
Hello, \[Series 1 with DigiMesh firmware and api mode\] I am using the DN command to resolve the identifier of a node. According to the docs, I should receive a response with the identifier. For some reason, this address… --- ## [Missing some generic samples from DC 9.62?](https://forums.digi.com/t/missing-some-generic-samples-from-dc-9-62/11625)
**Author:** [@developer](https://forums.digi.com/u/developer)\ **Replies:** 2\ **Last updated:** [June 21, 2013, 1:09am UTC](https://forums.digi.com/t/missing-some-generic-samples-from-dc-9-62/11625 "2013-06-21T01:09:07Z")
I am using 9.62 for a 37xx project. The sample doc I’ve seen references some samples that aren’t in the package (Samples\\Tcpip\\addp.c), etc. These may have been added to the DC10.x packages, but from what I understand,…