# \#draw

**URL:** https://forums.digi.com/tag/draw/607.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [Connectcore 6UL pro current supply](https://forums.digi.com/t/connectcore-6ul-pro-current-supply/22197)

<div class="topic-metadata">

**Author:** [@cstanton](https://forums.digi.com/u/cstanton)\
**Replies:** 1\
**Last updated:** [February 10, 2021, 11:34am UTC](https://forums.digi.com/t/connectcore-6ul-pro-current-supply/22197 "2021-02-10T11:34:43Z")

</div>

Hi, How much current can the 3V3 pins on the connectcore 6UL pro provide? I cant see it in the documentation. thanks!

---

## [current consumption of xbee-zb-s2 in sleep mode](https://forums.digi.com/t/current-consumption-of-xbee-zb-s2-in-sleep-mode/12134)

<div class="topic-metadata">

**Author:** [@Jerome](https://forums.digi.com/u/Jerome)\
**Replies:** 1\
**Last updated:** [June 30, 2017, 3:41pm UTC](https://forums.digi.com/t/current-consumption-of-xbee-zb-s2-in-sleep-mode/12134 "2017-06-30T15:41:40Z")

</div>

Hi, folks, I am a little confused about the current consumption of xbee-zigbee s2 when configured in pin-sleep mode. There is detailed documentation on serial 1: http://www.johnhenryshammer.com/WOW2/pagesHowTo/xbeeSeri…

---

## [Maximum number of coordinator in a zigbee network is possible?](https://forums.digi.com/t/maximum-number-of-coordinator-in-a-zigbee-network-is-possible/14368)

<div class="topic-metadata">

**Author:** [@soumikg.msit](https://forums.digi.com/u/soumikg.msit)\
**Replies:** 1\
**Last updated:** [February 25, 2015, 3:39pm UTC](https://forums.digi.com/t/maximum-number-of-coordinator-in-a-zigbee-network-is-possible/14368 "2015-02-25T15:39:00Z")

</div>

---

## [commissioning button current xbee](https://forums.digi.com/t/commissioning-button-current-xbee/13544)

<div class="topic-metadata">

**Author:** [@slicker](https://forums.digi.com/u/slicker)\
**Replies:** 2\
**Last updated:** [September 2, 2014, 6:54am UTC](https://forums.digi.com/t/commissioning-button-current-xbee/13544 "2014-09-02T06:54:44Z")

</div>

In the XBee guide there is the following statement. Having the commissioning button enabled during sleep will increase the sleeping current draw (especially in SM1 mode). It is necessary to hold down the commissioning …

---

## [What is  the maximum current possible by each pin of PORT A on RCM4300 module?](https://forums.digi.com/t/what-is-the-maximum-current-possible-by-each-pin-of-port-a-on-rcm4300-module/13160)

<div class="topic-metadata">

**Author:** [@Sebastian](https://forums.digi.com/u/Sebastian)\
**Replies:** 1\
**Last updated:** [June 19, 2014, 11:56am UTC](https://forums.digi.com/t/what-is-the-maximum-current-possible-by-each-pin-of-port-a-on-rcm4300-module/13160 "2014-06-19T11:56:17Z")

</div>

---

## [In extended sleep mode, Xbee pulls too much voltage and MCU wakes up thinking pin = Low](https://forums.digi.com/t/in-extended-sleep-mode-xbee-pulls-too-much-voltage-and-mcu-wakes-up-thinking-pin-low/11680)

<div class="topic-metadata">

**Author:** [@Luis78](https://forums.digi.com/u/Luis78)\
**Replies:** 1\
**Last updated:** [May 12, 2014, 2:55pm UTC](https://forums.digi.com/t/in-extended-sleep-mode-xbee-pulls-too-much-voltage-and-mcu-wakes-up-thinking-pin-low/11680 "2014-05-12T14:55:43Z")

</div>

Dear Community, I have made my own temperature and RH sensor using your Xbee units connected to an ATMEGA 328P microcontroller. The transmission works fine and the problem I am having is that when the Xbee is in extend…