# \#driver **URL:** https://forums.digi.com/tag/driver/282.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Windows cannot verify the digital signature of the drivers required for this device](https://forums.digi.com/t/windows-cannot-verify-the-digital-signature-of-the-drivers-required-for-this-device/30624)
**Author:** [@LLemes](https://forums.digi.com/u/LLemes)\ **Replies:** 3\ **Last updated:** [May 14, 2024, 6:21pm UTC](https://forums.digi.com/t/windows-cannot-verify-the-digital-signature-of-the-drivers-required-for-this-device/30624 "2024-05-14T18:21:39Z")
I downloaded RealPort installation software for Windows 7 professional 40002549\_K (driver version 4.11.491.0) for virtualization of serial ports (TS 4 H MEI), but the driver’s digital signature error occurs, preventing t… --- ## [Where can I download the realport drivers for windows 7 and 10?](https://forums.digi.com/t/where-can-i-download-the-realport-drivers-for-windows-7-and-10/22739)
**Author:** [@dwkennedy](https://forums.digi.com/u/dwkennedy)\ **Replies:** 4\ **Last updated:** [October 22, 2021, 4:23pm UTC](https://forums.digi.com/t/where-can-i-download-the-realport-drivers-for-windows-7-and-10/22739 "2021-10-22T16:23:49Z")
I am trying to download the realport driver for windows 7 and/or 10. I have a portserver TS MEI, I used to be able to have it show up under windows as 4 serial ports. --- ## [Running NeoPixel on XBee3 with MicroPython](https://forums.digi.com/t/running-neopixel-on-xbee3-with-micropython/22227)
**Author:** [@kapetan](https://forums.digi.com/u/kapetan)\ **Replies:** 4\ **Last updated:** [March 1, 2021, 7:43am UTC](https://forums.digi.com/t/running-neopixel-on-xbee3-with-micropython/22227 "2021-03-01T07:43:01Z")
Hi, Is it possible to run NeoPixel from MicroPython? I was not able to find any compatible drivers (there were some who relied on SPI which the XBee3 doesn’t seem to support). --- ## [Digi C/X PCI Host Card Driver](https://forums.digi.com/t/digi-c-x-pci-host-card-driver/21712)
**Author:** [@EagleChu](https://forums.digi.com/u/EagleChu)\ **Replies:** 0\ **Last updated:** [August 27, 2020, 9:54am UTC](https://forums.digi.com/t/digi-c-x-pci-host-card-driver/21712 "2020-08-27T09:54:13Z")
Dear Sir, I’m going to install the Digi C/X PCI host card in Windows Server 2019. However, I just found the Windows 2016 driver. Is it possible to operate in 2019? --- ## [dgrp\_gui issue opensuse LEAP 15.1](https://forums.digi.com/t/dgrp-gui-issue-opensuse-leap-15-1/20962)
**Author:** [@fmousnier](https://forums.digi.com/u/fmousnier)\ **Replies:** 2\ **Last updated:** [December 10, 2019, 4:04pm UTC](https://forums.digi.com/t/dgrp-gui-issue-opensuse-leap-15-1/20962 "2019-12-10T16:04:32Z")
Hi all, We successfuly build DIGI drivers on an opensuse 15.1 LEAP, all seems to be OK but it’s imppssible to launch dgrp\_gui interface. Error in startup script: invalid command name “image” while executing "image cr… --- ## [Need to develop a camera driver for yocto connectcore 6](https://forums.digi.com/t/need-to-develop-a-camera-driver-for-yocto-connectcore-6/20792)
**Author:** [@vijithg](https://forums.digi.com/u/vijithg)\ **Replies:** 2\ **Last updated:** [October 3, 2019, 9:22am UTC](https://forums.digi.com/t/need-to-develop-a-camera-driver-for-yocto-connectcore-6/20792 "2019-10-03T09:22:23Z")
Hi , I have to develop a camera driver for connectcore 6 yocto build. Camera driver wont support for yocto build. But I have a driver file for the camera ie. imx219\_mipi.c . I have another camera supported file ie. ov56… --- ## [How can I specify the client id for awusbmanager via command-line?](https://forums.digi.com/t/how-can-i-specify-the-client-id-for-awusbmanager-via-command-line/20806)
**Author:** [@jerryw](https://forums.digi.com/u/jerryw)\ **Replies:** 0\ **Last updated:** [October 3, 2019, 9:22am UTC](https://forums.digi.com/t/how-can-i-specify-the-client-id-for-awusbmanager-via-command-line/20806 "2019-10-03T09:22:16Z")
I have AnywhereUSB 2 Plus module running on windows 10. I want to be able to create ephemeral VMs and be able to assign the client ID via command line since my environment is headless. The VMs are short-lived and will … --- ## [Driver issue with AnywhereUSB/14](https://forums.digi.com/t/driver-issue-with-anywhereusb-14/20560)
**Author:** [@administrateurs-si](https://forums.digi.com/u/administrateurs-si)\ **Replies:** 1\ **Last updated:** [October 2, 2019, 10:24am UTC](https://forums.digi.com/t/driver-issue-with-anywhereusb-14/20560 "2019-10-02T10:24:08Z")
Hello, I have an issue with my new AnywhereUSB/14. I tested it on a Windows Server 2016 VM and a Windows 10 Workstation. -The most of time, no device really pop to any server or computer (tested with a generic usb key) … --- ## [Can not find remote hub](https://forums.digi.com/t/can-not-find-remote-hub/20041)
**Author:** [@bigcat](https://forums.digi.com/u/bigcat)\ **Replies:** 1\ **Last updated:** [August 13, 2019, 2:48am UTC](https://forums.digi.com/t/can-not-find-remote-hub/20041 "2019-08-13T02:48:30Z")
Hi, I’m getting Device Status : Can not find remote hub at x.x.x.x when using the utility. same when I’m using its API (AwUsbApi.dll) I’m using AnywhereUSB/14 with it’s latest driver 40002668\_S and firmware 82002081\_R.… --- ## [Do some know about a USB to XBEE Device where I can write my USB driver by my own?](https://forums.digi.com/t/do-some-know-about-a-usb-to-xbee-device-where-i-can-write-my-usb-driver-by-my-own/20528)
**Author:** [@tschaka81](https://forums.digi.com/u/tschaka81)\ **Replies:** 0\ **Last updated:** [May 28, 2019, 2:59pm UTC](https://forums.digi.com/t/do-some-know-about-a-usb-to-xbee-device-where-i-can-write-my-usb-driver-by-my-own/20528 "2019-05-28T14:59:19Z")
For example the USB interface I want to connect is a serial to USB device. I want to avoid using a big Raspberry Pi (or even Zero) for such a purpose. --- ## [SPI MRAM MR25H128 initialization error (mtdcrypt: Key decryption error.)](https://forums.digi.com/t/spi-mram-mr25h128-initialization-error-mtdcrypt-key-decryption-error/20504)
**Author:** [@mruetti](https://forums.digi.com/u/mruetti)\ **Replies:** 2\ **Last updated:** [May 23, 2019, 2:50pm UTC](https://forums.digi.com/t/spi-mram-mr25h128-initialization-error-mtdcrypt-key-decryption-error/20504 "2019-05-23T14:50:47Z")
Hi I try to integrate an tiny little SPI MRAM (MR25H128) with an imx6ulsbc. A kernel patch to support the mr25h128 is available (https://lore.kernel.org/patchwork/patch/842656/). The device tree looks like this: flash… --- ## [Changing advanced settings in win 10](https://forums.digi.com/t/changing-advanced-settings-in-win-10/20474)
**Author:** [@mace](https://forums.digi.com/u/mace)\ **Replies:** 0\ **Last updated:** [May 8, 2019, 4:34pm UTC](https://forums.digi.com/t/changing-advanced-settings-in-win-10/20474 "2019-05-08T16:34:25Z")
Hi, I want to use a DIGI TS2 Portserver. I installed the Driver on win10 x64. I want to change the IP-Adress. The manual says the following: Right click My Computer. Choose Properties \> Hardware \> Device Manager. Loca… --- ## [TouchPanel via USB on CC6UL pro](https://forums.digi.com/t/touchpanel-via-usb-on-cc6ul-pro/20299)
**Author:** [@genzo436](https://forums.digi.com/u/genzo436)\ **Replies:** 1\ **Last updated:** [March 1, 2019, 11:38am UTC](https://forums.digi.com/t/touchpanel-via-usb-on-cc6ul-pro/20299 "2019-03-01T11:38:33Z")
Hi, I am working with a “ConnectCore 6UL SBC Pro” development board, so far I was working with a Fusion 7" displaw with an I2C TouchPanel, everything working as expected. Now I need to switch the display to a bigger on… --- ## [Fails to change Function Set XB24-ZB](https://forums.digi.com/t/fails-to-change-function-set-xb24-zb/20163)
**Author:** [@sebastianmenoni](https://forums.digi.com/u/sebastianmenoni)\ **Replies:** 0\ **Last updated:** [January 10, 2019, 1:27pm UTC](https://forums.digi.com/t/fails-to-change-function-set-xb24-zb/20163 "2019-01-10T13:27:59Z")
I have an XSTICK2 of the ZB XB24 ZB family, I load the frmware and by default the function set is configured as ZigBee Coordinator API. I try to change the firmware and it throws me the following message “File ‘ZB24-ZB\_2… --- ## [IBM 5723 2-PORT ASYNCHRONOUS EIA-232 PC1 ADAPTER 80P4353](https://forums.digi.com/t/ibm-5723-2-port-asynchronous-eia-232-pc1-adapter-80p4353/19934)
**Author:** [@walpcf1](https://forums.digi.com/u/walpcf1)\ **Replies:** 0\ **Last updated:** [October 16, 2018, 10:03am UTC](https://forums.digi.com/t/ibm-5723-2-port-asynchronous-eia-232-pc1-adapter-80p4353/19934 "2018-10-16T10:03:34Z")
I need a driver for the AIX5.3. The model is IBM 5723 2-PORT ASYNCHRONOUS EIA-232 PC1 ADAPTER 80P4353. --- ## [Realport Digi Drivers Update Kills XWindows](https://forums.digi.com/t/realport-digi-drivers-update-kills-xwindows/19947)
**Author:** [@misperry](https://forums.digi.com/u/misperry)\ **Replies:** 0\ **Last updated:** [October 16, 2018, 9:16am UTC](https://forums.digi.com/t/realport-digi-drivers-update-kills-xwindows/19947 "2018-10-16T09:16:49Z")
I am running: Red Hat Linux 6.5 Kernel 2.6.32-754.3.5.el6.x86\_64 Using: ConnectPort LTS 16 I download the new digi realport drivers src.rpm 40002086\_Z.src.rpm. I place these on a development platform we have and perf… --- ## [I have an old Digi Neo 4pt Univ card PN: (1P)50001203-03.](https://forums.digi.com/t/i-have-an-old-digi-neo-4pt-univ-card-pn-1p-50001203-03/18767)
**Author:** [@jallred](https://forums.digi.com/u/jallred)\ **Replies:** 2\ **Last updated:** [September 6, 2018, 12:12pm UTC](https://forums.digi.com/t/i-have-an-old-digi-neo-4pt-univ-card-pn-1p-50001203-03/18767 "2018-09-06T12:12:28Z")
I can’t tell if the drivers on the site support this product and if they don’t can I have any help finding this driver? Had a PC crash and need to reinstall the driver on a new PC to get the port to be recognized by Wind… --- ## [USBAnywhere 14port driver install is failing on initial install... Help please.](https://forums.digi.com/t/usbanywhere-14port-driver-install-is-failing-on-initial-install-help-please/19814)
**Author:** [@snaven](https://forums.digi.com/u/snaven)\ **Replies:** 0\ **Last updated:** [August 27, 2018, 3:07pm UTC](https://forums.digi.com/t/usbanywhere-14port-driver-install-is-failing-on-initial-install-help-please/19814 "2018-08-27T15:07:27Z")
I am trying to install AnywhereUSB/14 on to a virtual (VMWare) Windows 2016 Server. The AnywhereUSB/14 firmware has been updated to the latest version 1.95.21.64 (build 82002081\_P awusb14 eos 2/02/2018 8:27:24a). I hav… --- ## [How to: ASOC Machine Driver for TLV320AIC31XX on CCIMX6UL ?](https://forums.digi.com/t/how-to-asoc-machine-driver-for-tlv320aic31xx-on-ccimx6ul/19660)
**Author:** [@TomCC](https://forums.digi.com/u/TomCC)\ **Replies:** 0\ **Last updated:** [June 26, 2018, 9:57am UTC](https://forums.digi.com/t/how-to-asoc-machine-driver-for-tlv320aic31xx-on-ccimx6ul/19660 "2018-06-26T09:57:48Z")
Hello everyone, I am currently working to implement two Digital Microphones on a CCIMX6UL Custom Board. For testing and developing I am using the CCIMX6ULStarter Board. My plan was to implement the microphones via a TLV… --- ## [wlan driver fails to load](https://forums.digi.com/t/wlan-driver-fails-to-load/19597)
**Author:** [@AES\_Dev](https://forums.digi.com/u/AES_Dev)\ **Replies:** 4\ **Last updated:** [June 14, 2018, 3:17pm UTC](https://forums.digi.com/t/wlan-driver-fails-to-load/19597 "2018-06-14T15:17:48Z")
I’ve compiled an image and am booting it via network (ConnectCore 6UL SBC Express | DEY-2.2) but the wlan is still not showing. I noticed that upon boot, it actually says “wlan: driver load failure.” I then tried “sudo m… --- ## [This device cannot start Code 10](https://forums.digi.com/t/this-device-cannot-start-code-10/14423)
**Author:** [@mcameron](https://forums.digi.com/u/mcameron)\ **Replies:** 3\ **Last updated:** [October 2, 2017, 8:33am UTC](https://forums.digi.com/t/this-device-cannot-start-code-10/14423 "2017-10-02T08:33:20Z")
That is what I see in device manager for the RealPortUSB Root Hub. The software/ driver is installed (v3.71.79) and was re-installed with no change. The Utility shows the device successfully connected. Windows wont start… --- ## [UsbAnywhere driver v3.90.213 not available for download?](https://forums.digi.com/t/usbanywhere-driver-v3-90-213-not-available-for-download/17974)
**Author:** [@djorkaef](https://forums.digi.com/u/djorkaef)\ **Replies:** 2\ **Last updated:** [February 17, 2017, 4:43pm UTC](https://forums.digi.com/t/usbanywhere-driver-v3-90-213-not-available-for-download/17974 "2017-02-17T16:43:18Z")
I have the issue reported in knowledge article http://knowledge.digi.com/articles/Knowledge\_Base\_Article/AnywhereUSB-Code-38-error The solution is to install driver 3.90.213, but on the website the highest driver I can… --- ## [WR21 will not work with realport](https://forums.digi.com/t/wr21-will-not-work-with-realport/17928)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 3\ **Last updated:** [January 27, 2017, 4:31pm UTC](https://forums.digi.com/t/wr21-will-not-work-with-realport/17928 "2017-01-27T16:31:39Z")
Hello: Here is my device: s273540>ati5 Digi TransPort WR21-U82B-DE1-XX Ser#:273540 HW Revision: 1201a Software Build Ver5.2.15.6. Aug 17 2016 17:42:05 WW ARM Bios Ver 7.56u v43 454MHz B987-M995-F80-O1,0 MAC:00042… --- ## [The AnywhereUSB/2 driver after the Windows Server 2008 R2 updating isn't started](https://forums.digi.com/t/the-anywhereusb-2-driver-after-the-windows-server-2008-r2-updating-isnt-started/17788)
**Author:** [@sersid](https://forums.digi.com/u/sersid)\ **Replies:** 1\ **Last updated:** [December 15, 2016, 6:38pm UTC](https://forums.digi.com/t/the-anywhereusb-2-driver-after-the-windows-server-2008-r2-updating-isnt-started/17788 "2016-12-15T18:38:12Z")
We use AnywhereUSB/2. Everything successfully worked. After installation of updates of Windows Server 2008 R2 the driver ceased to be launched, Windows gives an error message: “It wasn’t succeeded to load driver \\Driver\\… --- ## [ov5642.c driver modify](https://forums.digi.com/t/ov5642-c-driver-modify/17295)
**Author:** [@klugattila](https://forums.digi.com/u/klugattila)\ **Replies:** 0\ **Last updated:** [August 25, 2016, 10:26am UTC](https://forums.digi.com/t/ov5642-c-driver-modify/17295 "2016-08-25T10:26:02Z")
Hello, I would like to modify the ov5642.c and drivers/media/platform/mxc/capture/mxc\_v4l2\_capture.c driver files and upload to ConnectCore 6q board. It is possible? I would like to use the CSI1 and IPU#2 port. link: … --- ## [Can't update radio firmware, Can't detect modules. Ports "already in use"](https://forums.digi.com/t/cant-update-radio-firmware-cant-detect-modules-ports-already-in-use/16903)
**Author:** [@Flieronymus](https://forums.digi.com/u/Flieronymus)\ **Replies:** 2\ **Last updated:** [June 14, 2016, 9:52am UTC](https://forums.digi.com/t/cant-update-radio-firmware-cant-detect-modules-ports-already-in-use/16903 "2016-06-14T09:52:23Z")
I installed the correct drivers for my Sparkfun USB Xbee dongles and they show up as COM6 and COM7 in my device manager. When I try to detect or add the modules in XCTU, I get “Could not find any device in port COM6(and … --- ## [Code 38 (Win10 + WinSrv2012R2) driver already in memory so cannot be loaded](https://forums.digi.com/t/code-38-win10-winsrv2012r2-driver-already-in-memory-so-cannot-be-loaded/16902)
**Author:** [@devino](https://forums.digi.com/u/devino)\ **Replies:** 1\ **Last updated:** [June 8, 2016, 6:12pm UTC](https://forums.digi.com/t/code-38-win10-winsrv2012r2-driver-already-in-memory-so-cannot-be-loaded/16902 "2016-06-08T18:12:00Z")
I just got a AnywhereUSB/2 device. I tested it an was all excited as I tried it on my desktop and 2 VMs. Then I went to show a co-worker and nothing… After investigation, it appears I am seeing the Code38 driver memor… --- ## [Driver for portserver TS mei windows 10](https://forums.digi.com/t/driver-for-portserver-ts-mei-windows-10/16845)
**Author:** [@bergp](https://forums.digi.com/u/bergp)\ **Replies:** 2\ **Last updated:** [May 31, 2016, 9:36am UTC](https://forums.digi.com/t/driver-for-portserver-ts-mei-windows-10/16845 "2016-05-31T09:36:31Z")
We used Portserver TS mei 4 ports. The driver Device Discovery utility for windows is not working. Is there an driver for Windows 10? --- ## [XBEE 900HP USB Modem Driver Issues](https://forums.digi.com/t/xbee-900hp-usb-modem-driver-issues/15724)
**Author:** [@wbrenneman](https://forums.digi.com/u/wbrenneman)\ **Replies:** 4\ **Last updated:** [April 10, 2016, 4:06pm UTC](https://forums.digi.com/t/xbee-900hp-usb-modem-driver-issues/15724 "2016-04-10T16:06:58Z")
I am unable to get my new XBEE 900HP USB Modems to properly connect to a new Windows 7 PC. It installs the USB Serial Converter driver, but then I get a notification from Windows that the “Hardware ID Missing - Windows … --- ## [Digi Neo 8 Port Port Enumeration Automation?](https://forums.digi.com/t/digi-neo-8-port-port-enumeration-automation/15809)
**Author:** [@MathieuGeoffroy](https://forums.digi.com/u/MathieuGeoffroy)\ **Replies:** 5\ **Last updated:** [February 1, 2016, 9:24am UTC](https://forums.digi.com/t/digi-neo-8-port-port-enumeration-automation/15809 "2016-02-01T09:24:14Z")
Is it possible to modify the number of the first wanted port of the Neo 4 or 8 Port? I wish to get an enumeration of COM11-COM18 by default. I must either modify by any way the INF? Or maybe Registry Key? I wish to au… [Next page](https://forums.digi.com/tag/driver/282.md?match_all_tags=true&page=1&tags%5B%5D=driver)