# \#end-device **URL:** https://forums.digi.com/tag/end-device/1585.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [How to lock an end-device into a coordinator in Xbee3?](https://forums.digi.com/t/how-to-lock-an-end-device-into-a-coordinator-in-xbee3/23282)
**Author:** [@oa1](https://forums.digi.com/u/oa1)\ **Replies:** 3\ **Last updated:** [November 11, 2022, 8:36am UTC](https://forums.digi.com/t/how-to-lock-an-end-device-into-a-coordinator-in-xbee3/23282 "2022-11-11T08:36:11Z")
Hi there, I am trying to develop a custom end-point device. My problem is that: the end-device is leaving network after 3 trials of rejoin to coordinator and then forgets about the coordinator. I want to lock the end-de… --- ## [End device take 8-10 minute to reconnect after Power cycle or NR command with version 4061](https://forums.digi.com/t/end-device-take-8-10-minute-to-reconnect-after-power-cycle-or-nr-command-with-version-4061/22926)
**Author:** [@Sheetal\_Kasar](https://forums.digi.com/u/Sheetal_Kasar)\ **Replies:** 1\ **Last updated:** [September 16, 2022, 2:01pm UTC](https://forums.digi.com/t/end-device-take-8-10-minute-to-reconnect-after-power-cycle-or-nr-command-with-version-4061/22926 "2022-09-16T14:01:38Z")
Hi I was setup system with 8 end devices ( battery power ) sending data to coordinator after every 1 minutes interval. I observed End devices are taking more than 8-10 minutes to rejoin the network, if power cycle give… --- ## [Can XBee 3 Pro End Device rejoin XBee Zigbee network after Coordinator rebooted](https://forums.digi.com/t/can-xbee-3-pro-end-device-rejoin-xbee-zigbee-network-after-coordinator-rebooted/22648)
**Author:** [@ematt](https://forums.digi.com/u/ematt)\ **Replies:** 2\ **Last updated:** [September 9, 2021, 12:49pm UTC](https://forums.digi.com/t/can-xbee-3-pro-end-device-rejoin-xbee-zigbee-network-after-coordinator-rebooted/22648 "2021-09-09T12:49:05Z")
Hello I have seen a similar question for 802.15.4, but could not find answer for Zigbee network. My question is, for an XBee 3 Pro Zigbee configured as an End Device (SM=4 Cyclic Sleep), if the coordinator loses power … --- ## [ZigBee Point to Point communication without a coordinator](https://forums.digi.com/t/zigbee-point-to-point-communication-without-a-coordinator/22522)
**Author:** [@EAMat12](https://forums.digi.com/u/EAMat12)\ **Replies:** 1\ **Last updated:** [July 13, 2021, 9:06am UTC](https://forums.digi.com/t/zigbee-point-to-point-communication-without-a-coordinator/22522 "2021-07-13T09:06:49Z")
Hello all, is it possible to send data between 2 zigbee end devices (point to point communication) without having a coordinator and router ? Or only 802.15.4 modules are able to do such communication? --- ## [ZigBee end device point to point communication without coordinator](https://forums.digi.com/t/zigbee-end-device-point-to-point-communication-without-coordinator/22521)
**Author:** [@EAMat12](https://forums.digi.com/u/EAMat12)\ **Replies:** 1\ **Last updated:** [July 13, 2021, 9:04am UTC](https://forums.digi.com/t/zigbee-end-device-point-to-point-communication-without-coordinator/22521 "2021-07-13T09:04:48Z")
Hello everyone, is it possible to establish a point to point communication between 2 zigbee devices without having a coordinator or a coordinator is always needed for that communication? Is there a way to have a commun… --- ## [XBee3 end point device not joined to coordinator after a channel switch with encryption enabled](https://forums.digi.com/t/xbee3-end-point-device-not-joined-to-coordinator-after-a-channel-switch-with-encryption-enabled/22430)
**Author:** [@mz\_autec](https://forums.digi.com/u/mz_autec)\ **Replies:** 1\ **Last updated:** [June 22, 2021, 8:10am UTC](https://forums.digi.com/t/xbee3-end-point-device-not-joined-to-coordinator-after-a-channel-switch-with-encryption-enabled/22430 "2021-06-22T08:10:54Z")
Hi, I hope someone can help to sove the problem we have found with XBee3 and Zigbee stack. We have a simple one endpoint and a coordinator configuration with two XBee3 XB3-24Z8US (firmware vers. 100B) configured with a… --- ## [End device can not join a network](https://forums.digi.com/t/end-device-can-not-join-a-network/22469)
**Author:** [@aminb](https://forums.digi.com/u/aminb)\ **Replies:** 1\ **Last updated:** [June 21, 2021, 2:48pm UTC](https://forums.digi.com/t/end-device-can-not-join-a-network/22469 "2021-06-21T14:48:53Z")
Hi All, I have two XB3-24 devices configured as Zigbee Coordinator API and Zigbee End Device API. End device can’t join coordinator’s network. Security is disabled on both (EE = 0 and KY = 0). Coordinator’s NC = 13 E… --- ## [Why end devices are removed from network after 2-3 days ?](https://forums.digi.com/t/why-end-devices-are-removed-from-network-after-2-3-days/22346)
**Author:** [@HMorais](https://forums.digi.com/u/HMorais)\ **Replies:** 2\ **Last updated:** [April 13, 2021, 2:12pm UTC](https://forums.digi.com/t/why-end-devices-are-removed-from-network-after-2-3-days/22346 "2021-04-13T14:12:23Z")
I have a xbee3 zigbee module as coordinator and 4 third-party end devices. I have no problems at the beginning, sending unicast commands with 64-bits addresses, and receiving data (and NC=10). After 2-3 days, end devic… --- ## [Want not to operate an orphan scan of zigbee end device](https://forums.digi.com/t/want-not-to-operate-an-orphan-scan-of-zigbee-end-device/22330)
**Author:** [@Jeon\_Youngmin](https://forums.digi.com/u/Jeon_Youngmin)\ **Replies:** 1\ **Last updated:** [April 8, 2021, 1:07pm UTC](https://forums.digi.com/t/want-not-to-operate-an-orphan-scan-of-zigbee-end-device/22330 "2021-04-08T13:07:54Z")
Hello, I have some questions I’m using one coordinator and 8 end-devices (Zigbee) for monitoring system. When leaving work, I have to turn off the power of coordinator (it must be done because of safety). Then, end-d… --- ## [XBee3: how to create a zigbee end device](https://forums.digi.com/t/xbee3-how-to-create-a-zigbee-end-device/22072)
**Author:** [@jms3000](https://forums.digi.com/u/jms3000)\ **Replies:** 5\ **Last updated:** [January 11, 2021, 11:57am UTC](https://forums.digi.com/t/xbee3-how-to-create-a-zigbee-end-device/22072 "2021-01-11T11:57:47Z")
I have an XBee3 configured as an zigbee end device. I included it in my home assistant zigbee network. Now I want to configure/program the XBee3 to behave like a switch with a temperature sensor. So it needs a Temperatur… --- ## [how to setup mesh network in xbee3 Digmesh 2.4 RF module](https://forums.digi.com/t/how-to-setup-mesh-network-in-xbee3-digmesh-2-4-rf-module/22002)
**Author:** [@Denial](https://forums.digi.com/u/Denial)\ **Replies:** 4\ **Last updated:** [November 30, 2020, 9:29am UTC](https://forums.digi.com/t/how-to-setup-mesh-network-in-xbee3-digmesh-2-4-rf-module/22002 "2020-11-30T09:29:22Z")
we are using Digi XBee® 3 DigiMesh 2.4 RF Module Firmware Version :- 300B Working with Synchronous Cyclic Sleep Coordinator (RXU) Settings :- Device Role:- Indirect msg coordinator Channel number(CH) = 13 Network I… --- ## [XBee 3 Coordinator - Never remove End Device](https://forums.digi.com/t/xbee-3-coordinator-never-remove-end-device/21676)
**Author:** [@brkns](https://forums.digi.com/u/brkns)\ **Replies:** 5\ **Last updated:** [September 8, 2020, 8:30am UTC](https://forums.digi.com/t/xbee-3-coordinator-never-remove-end-device/21676 "2020-09-08T08:30:30Z")
Hello everyone. I have a system that includes an XBee 3 coordinator, an XBee S2C end device and several end devices from third party. The coordinator uses NJ=0 when there is not a joining request. The sensors are inclu… --- ## [Xbee 3 - micromodule - pin sleep - problems](https://forums.digi.com/t/xbee-3-micromodule-pin-sleep-problems/21664)
**Author:** [@Enzo](https://forums.digi.com/u/Enzo)\ **Replies:** 5\ **Last updated:** [August 17, 2020, 9:38am UTC](https://forums.digi.com/t/xbee-3-micromodule-pin-sleep-problems/21664 "2020-08-17T09:38:23Z")
Hello everyone, I hava a Xbee 3 micromodule, with a XBee surface-mount (SMT) Grove development board. One Xbee is a router and the other cordinator. When I configure the router to pin hibernate (pin sleep), It turns int… --- ## [Xbee Pro s2c pin sleep - end device rejoin in the network](https://forums.digi.com/t/xbee-pro-s2c-pin-sleep-end-device-rejoin-in-the-network/21559)
**Author:** [@Enzo](https://forums.digi.com/u/Enzo)\ **Replies:** 1\ **Last updated:** [July 16, 2020, 8:32am UTC](https://forums.digi.com/t/xbee-pro-s2c-pin-sleep-end-device-rejoin-in-the-network/21559 "2020-07-16T08:32:53Z")
I have two Xbee Pro S2C in my network.(coordinator and router) When I put the router in pin sleep mode (turning it into end device), the coordinator can´t discover the end device anymore. After this, I need to plug my e… --- ## [xbee end device cannot join](https://forums.digi.com/t/xbee-end-device-cannot-join/21268)
**Author:** [@arneo](https://forums.digi.com/u/arneo)\ **Replies:** 3\ **Last updated:** [April 17, 2020, 9:04am UTC](https://forums.digi.com/t/xbee-end-device-cannot-join/21268 "2020-04-17T09:04:58Z")
Hi All, I have two XB24-Z7 (Xbee S2) devices and I am not able to get End device to join coordinator’s created PAN. Following are critical settings: DL and DH set in both coordinator and end node to look for other’s … --- ## [Can I switch an End device or Coordinator out of Association without powering down](https://forums.digi.com/t/can-i-switch-an-end-device-or-coordinator-out-of-association-without-powering-down/21143)
**Author:** [@geoffrj](https://forums.digi.com/u/geoffrj)\ **Replies:** 1\ **Last updated:** [February 25, 2020, 1:03pm UTC](https://forums.digi.com/t/can-i-switch-an-end-device-or-coordinator-out-of-association-without-powering-down/21143 "2020-02-25T13:03:55Z")
Once I have an Xbee End-Device successfully associated with a Coordinator, so that both modules have automatically selected the cleanest wireless channel, is it possible to switch both modules out of association and back… --- ## [End device not routing through router to connect to coordinator](https://forums.digi.com/t/end-device-not-routing-through-router-to-connect-to-coordinator/17372)
**Author:** [@vinayatsusten](https://forums.digi.com/u/vinayatsusten)\ **Replies:** 11\ **Last updated:** [December 26, 2019, 9:55am UTC](https://forums.digi.com/t/end-device-not-routing-through-router-to-connect-to-coordinator/17372 "2019-12-26T09:55:14Z")
I have 3 modules of xbee pro s2b and I’ve configured one as coordinator, router and 3rd one as end-device. I managed to put end-device out of the range from coordinator but in the range of router and router is in the ran… --- ## [Xbee Router Showing as End Device](https://forums.digi.com/t/xbee-router-showing-as-end-device/20874)
**Author:** [@dfj3404](https://forums.digi.com/u/dfj3404)\ **Replies:** 1\ **Last updated:** [November 13, 2019, 9:11am UTC](https://forums.digi.com/t/xbee-router-showing-as-end-device/20874 "2019-11-13T09:11:39Z")
I have an issue where my Xbee devices are showing up as end devices when plugged into my custom PBCA. They show up as routers when plugged into the Grove dev board, but not when plugged into my board. I’m trying to narro… --- ## [Why End-Devices persist in the Routing Table of a Coordinator even those End-Devices are not connected any more?](https://forums.digi.com/t/why-end-devices-persist-in-the-routing-table-of-a-coordinator-even-those-end-devices-are-not-connected-any-more/20803)
**Author:** [@Molas89](https://forums.digi.com/u/Molas89)\ **Replies:** 0\ **Last updated:** [October 3, 2019, 9:21am UTC](https://forums.digi.com/t/why-end-devices-persist-in-the-routing-table-of-a-coordinator-even-those-end-devices-are-not-connected-any-more/20803 "2019-10-03T09:21:58Z")
I have been experiencing the next behavior: I have a Coordinator with two Routers and two End Devices, all of them are S2C series XBEE. Using XCTU in Network Working Mode, I see the two devices connected to the Coordin… --- ## [Can XBee3 join a Xbee S2C coordinator network?](https://forums.digi.com/t/can-xbee3-join-a-xbee-s2c-coordinator-network/20499)
**Author:** [@joshuab1986](https://forums.digi.com/u/joshuab1986)\ **Replies:** 0\ **Last updated:** [May 20, 2019, 7:38am UTC](https://forums.digi.com/t/can-xbee3-join-a-xbee-s2c-coordinator-network/20499 "2019-05-20T07:38:15Z")
I have some logic on a host that is triggered by data of a serial attached Xbee S2C coordinator. I’m trying to discover a Xbee3 node, but I’m not having any luck… Are there additional settings that I’ll need to configur… --- ## [Current draw vs # of radios active? (XBee 2.4GHz S1 & S2C)](https://forums.digi.com/t/current-draw-vs-of-radios-active-xbee-2-4ghz-s1-s2c/20409)
**Author:** [@embedded\_Tom](https://forums.digi.com/u/embedded_Tom)\ **Replies:** 0\ **Last updated:** [April 15, 2019, 4:46pm UTC](https://forums.digi.com/t/current-draw-vs-of-radios-active-xbee-2-4ghz-s1-s2c/20409 "2019-04-15T16:46:11Z")
We’re optimizing our firmware in a product that used XBee 2.4GHz S1 radios, and will be switching to S2C. We use DigiMesh protocol and the devices are setup as non-routing (end devices). Some people in the company think… --- ## [Transmit CANOpen data between two programable xbee s2c](https://forums.digi.com/t/transmit-canopen-data-between-two-programable-xbee-s2c/20363)
**Author:** [@atoni](https://forums.digi.com/u/atoni)\ **Replies:** 0\ **Last updated:** [March 20, 2019, 2:33pm UTC](https://forums.digi.com/t/transmit-canopen-data-between-two-programable-xbee-s2c/20363 "2019-03-20T14:33:49Z")
Hi, I would like to do a project, where one xbee sends car steering wheel sensor data to another xbee. Its CANOpen data, therefore I bought programable xbees (XB24CZ7UITB003) and MCP2515 CAN Bus TJA1050 Receiver SPI Mod… --- ## [Data in format api from end device to coordinator](https://forums.digi.com/t/data-in-format-api-from-end-device-to-coordinator/19670)
**Author:** [@Camargo](https://forums.digi.com/u/Camargo)\ **Replies:** 0\ **Last updated:** [July 2, 2018, 3:48pm UTC](https://forums.digi.com/t/data-in-format-api-from-end-device-to-coordinator/19670 "2018-07-02T15:48:22Z")
Hello! I need in my project to send data that the END DEVICE is receiving from the MCU and send it to the coordinator in the API format. The opposite process I can use with frame type 0x10. How do I do? --- ## [How can I change the end device parameters then if the link is down most of the time?](https://forums.digi.com/t/how-can-i-change-the-end-device-parameters-then-if-the-link-is-down-most-of-the-time/18292)
**Author:** [@pedro](https://forums.digi.com/u/pedro)\ **Replies:** 9\ **Last updated:** [May 1, 2018, 12:30am UTC](https://forums.digi.com/t/how-can-i-change-the-end-device-parameters-then-if-the-link-is-down-most-of-the-time/18292 "2018-05-01T00:30:10Z")
--- ## [Delay between two XBee End-Points (attached to RPi's) when told to collect data from XBee Coordinator (attached to a PC)](https://forums.digi.com/t/delay-between-two-xbee-end-points-attached-to-rpis-when-told-to-collect-data-from-xbee-coordinator-attached-to-a-pc/19368)
**Author:** [@Runias](https://forums.digi.com/u/Runias)\ **Replies:** 0\ **Last updated:** [April 5, 2018, 3:38pm UTC](https://forums.digi.com/t/delay-between-two-xbee-end-points-attached-to-rpis-when-told-to-collect-data-from-xbee-coordinator-attached-to-a-pc/19368 "2018-04-05T15:38:50Z")
Currently have 3 XBee S1 Modules in play. One is set up as a Coordinator (API mode) and is connected to a laptop via a USB-adapter. The other two are set up as End-Points (AT mode) and are connected to 2 Raspberry Pi’s… --- ## [Delay between two XBee End-Points when told to collect data from XBee Coordinator](https://forums.digi.com/t/delay-between-two-xbee-end-points-when-told-to-collect-data-from-xbee-coordinator/19363)
**Author:** [@Runias](https://forums.digi.com/u/Runias)\ **Replies:** 0\ **Last updated:** [April 4, 2018, 12:10pm UTC](https://forums.digi.com/t/delay-between-two-xbee-end-points-when-told-to-collect-data-from-xbee-coordinator/19363 "2018-04-04T12:10:05Z")
Currently have 3 XBee S1 Modules in play. One is set up as a Coordinator (API mode) and is connected to a laptop via a USB-adapter. The other two are set up as End-Points (AT mode) and are connected to 2 Raspberry Pi’s… --- ## [XBEE PRO S2 End device not joining network](https://forums.digi.com/t/xbee-pro-s2-end-device-not-joining-network/18966)
**Author:** [@ch123](https://forums.digi.com/u/ch123)\ **Replies:** 0\ **Last updated:** [November 30, 2017, 11:46am UTC](https://forums.digi.com/t/xbee-pro-s2-end-device-not-joining-network/18966 "2017-11-30T11:46:54Z")
I have 3 nos of XBEE PRO S2 radios. I have configured them as coordinator, router and end device respectively by changing their firmware using X-CTU. Coordinator: XBP24-ZB, 21A7, API2 Router: XBP24-ZB, 23A7, API2 End … --- ## [Force the end device connect to one of the router.](https://forums.digi.com/t/force-the-end-device-connect-to-one-of-the-router/16661)
**Author:** [@fuyacho](https://forums.digi.com/u/fuyacho)\ **Replies:** 16\ **Last updated:** [September 20, 2017, 11:07am UTC](https://forums.digi.com/t/force-the-end-device-connect-to-one-of-the-router/16661 "2017-09-20T11:07:18Z")
Is there anyway to connect the end-device not to the coordinator directly but one of the routers? --- ## [XCTU discover sleeping device](https://forums.digi.com/t/xctu-discover-sleeping-device/18451)
**Author:** [@janis.plots](https://forums.digi.com/u/janis.plots)\ **Replies:** 2\ **Last updated:** [June 19, 2017, 9:00am UTC](https://forums.digi.com/t/xctu-discover-sleeping-device/18451 "2017-06-19T09:00:34Z")
I have configured commissioning button as analog input and my device is configured as sleeping. Is there a way for me to find it in XCTU or have I blundered beyond point of return? --- ## [Xbee sleep maximum period](https://forums.digi.com/t/xbee-sleep-maximum-period/18448)
**Author:** [@janis.plots](https://forums.digi.com/u/janis.plots)\ **Replies:** 3\ **Last updated:** [June 16, 2017, 9:10am UTC](https://forums.digi.com/t/xbee-sleep-maximum-period/18448 "2017-06-16T09:10:02Z")
Is it possible to configure xbee/zigbee device to sleep longer then 28 seconds in cyclic sleep mode. I have seen in examples that 5 minutes is configured but in XCTU max sleep period is AF0(28000 ms) [Next page](https://forums.digi.com/tag/end-device/1585.md?match_all_tags=true&page=1&tags%5B%5D=end-device)