# \#fault

**URL:** https://forums.digi.com/tag/fault/1173.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [An application run with Segmentation fault error message on i.MX6 SBC](https://forums.digi.com/t/an-application-run-with-segmentation-fault-error-message-on-i-mx6-sbc/17200)

<div class="topic-metadata">

**Author:** [@klugattila](https://forums.digi.com/u/klugattila)\
**Replies:** 2\
**Last updated:** [August 8, 2016, 8:11am UTC](https://forums.digi.com/t/an-application-run-with-segmentation-fault-error-message-on-i-mx6-sbc/17200 "2016-08-08T08:11:55Z")

</div>

Hello, I try run the application on CC6 board (i.MX6 SBC Development Board). It is no run beacuse the message show: “Segmentation fault (core dumped)” I make the application with Qt5 software. The application is com…

---

## [Digi CM 48 - Can't save configuration (Segmentation fault)](https://forums.digi.com/t/digi-cm-48-cant-save-configuration-segmentation-fault/16957)

<div class="topic-metadata">

**Author:** [@david.durber](https://forums.digi.com/u/david.durber)\
**Replies:** 3\
**Last updated:** [June 27, 2016, 10:32am UTC](https://forums.digi.com/t/digi-cm-48-cant-save-configuration-segmentation-fault/16957 "2016-06-27T10:32:47Z")

</div>

Hi there, I am trying to install a new Certificate onto a Digi CM 48 device but it seems that the config is not being saved. I have downgraded and upgraded the firmware (now v 1.9.5.3) in a vain effort to correct this …

---

## [BL2010 Rabbit Board developed red (bad) light during cloning now nothing can be loaded](https://forums.digi.com/t/bl2010-rabbit-board-developed-red-bad-light-during-cloning-now-nothing-can-be-loaded/12629)

<div class="topic-metadata">

**Author:** [@sbvancel](https://forums.digi.com/u/sbvancel)\
**Replies:** 3\
**Last updated:** [March 6, 2014, 8:30am UTC](https://forums.digi.com/t/bl2010-rabbit-board-developed-red-bad-light-during-cloning-now-nothing-can-be-loaded/12629 "2014-03-06T08:30:41Z")

</div>

Trying to clone the board. Used the software to test the target board but now after several attempts to load program there is a red light on the target board that says “bad”. The software recognizes the board but cannot…