# \#file

**URL:** https://forums.digi.com/tag/file/407.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [connectport x2 upload file](https://forums.digi.com/t/connectport-x2-upload-file/23211)

<div class="topic-metadata">

**Author:** [@dmonroy](https://forums.digi.com/u/dmonroy)\
**Replies:** 5\
**Last updated:** [September 29, 2022, 8:45am UTC](https://forums.digi.com/t/connectport-x2-upload-file/23211 "2022-09-29T08:45:51Z")

</div>

Hello all, I would like yo know if there is any possibility to upload a file to /WEB/python without the connectprog.exe application? Is there any kind of REST service so I can POST the file? Many thanks!

---

## [how to upload program from RCM-3000 to PC?](https://forums.digi.com/t/how-to-upload-program-from-rcm-3000-to-pc/22604)

<div class="topic-metadata">

**Author:** [@Navid](https://forums.digi.com/u/Navid)\
**Replies:** 1\
**Last updated:** [August 30, 2021, 10:12am UTC](https://forums.digi.com/t/how-to-upload-program-from-rcm-3000-to-pc/22604 "2021-08-30T10:12:24Z")

</div>

I need to reprogram the RCM3000 but I don’t have the source file. I have the another RCM3000 and I want to upload the source code from one and download it to another one, so how to do that? how can i do that by Dynamic-C…

---

## [FTP read/write my FTP site Digi XBee 3 Cellular LTE-M/NB-IoT ATT Service](https://forums.digi.com/t/ftp-read-write-my-ftp-site-digi-xbee-3-cellular-lte-m-nb-iot-att-service/22515)

<div class="topic-metadata">

**Author:** [@WesleyB](https://forums.digi.com/u/WesleyB)\
**Replies:** 5\
**Last updated:** [July 11, 2021, 6:45am UTC](https://forums.digi.com/t/ftp-read-write-my-ftp-site-digi-xbee-3-cellular-lte-m-nb-iot-att-service/22515 "2021-07-11T06:45:06Z")

</div>

I purchased a LTE-M module early and was disappointed that with ATT I could not send an SMS message. So I have not worked with it anymore until now. I am wondering if with ATT service I can read/write a short file to a F…

---

## [how can i upload a files in a digi gateway with out using digi ESP?](https://forums.digi.com/t/how-can-i-upload-a-files-in-a-digi-gateway-with-out-using-digi-esp/14940)

<div class="topic-metadata">

**Author:** [@krishnareddy\_k](https://forums.digi.com/u/krishnareddy_k)\
**Replies:** 5\
**Last updated:** [March 8, 2021, 9:21am UTC](https://forums.digi.com/t/how-can-i-upload-a-files-in-a-digi-gateway-with-out-using-digi-esp/14940 "2021-03-08T09:21:35Z")

</div>

Iam using connect Port x4 gateway.This gateway is connected by Ethernet to my PC. I want to upload a files into the Gateway without using Digi ESP.Please guide me.

---

## [Deleting data files from flash](https://forums.digi.com/t/deleting-data-files-from-flash/21870)

<div class="topic-metadata">

**Author:** [@manos](https://forums.digi.com/u/manos)\
**Replies:** 6\
**Last updated:** [November 30, 2020, 9:18am UTC](https://forums.digi.com/t/deleting-data-files-from-flash/21870 "2020-11-30T09:18:42Z")

</div>

Hey everyone, In the Xbee 3 Zigbee RF Module User Guide it is stated that one of the limitations of the file system (compared to conventional file systems) is the following: “When a file on the file system is deleted, …

---

## [Event Logging: How to have get\_dio\_value return 1 or 0 instead of IOValue.HIGH / LOW](https://forums.digi.com/t/event-logging-how-to-have-get-dio-value-return-1-or-0-instead-of-iovalue-high-low/21569)

<div class="topic-metadata">

**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\
**Replies:** 1\
**Last updated:** [July 22, 2020, 8:34am UTC](https://forums.digi.com/t/event-logging-how-to-have-get-dio-value-return-1-or-0-instead-of-iovalue-high-low/21569 "2020-07-22T08:34:28Z")

</div>

I am logging events in python… simple IO change of state events. When I say value = module.get\_io\_value and log/print the content of value of course you get either IOValue.HIGH or IOValue.LOW. I want to log a 1 for IOV…

---

## [XBee Event logging, creating CSV file.](https://forums.digi.com/t/xbee-event-logging-creating-csv-file/21568)

<div class="topic-metadata">

**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\
**Replies:** 6\
**Last updated:** [July 21, 2020, 1:44pm UTC](https://forums.digi.com/t/xbee-event-logging-creating-csv-file/21568 "2020-07-21T13:44:13Z")

</div>

Hello, I am logging change of state values within my Python program… I am using XBee ZigBee. The python XBee documentation provides Event Log documentation. It gives code and general concept about loggers, handlers, and…

---

## [upload file to wr31](https://forums.digi.com/t/upload-file-to-wr31/21334)

<div class="topic-metadata">

**Author:** [@Nordh](https://forums.digi.com/u/Nordh)\
**Replies:** 1\
**Last updated:** [May 8, 2020, 2:25pm UTC](https://forums.digi.com/t/upload-file-to-wr31/21334 "2020-05-08T14:25:28Z")

</div>

my customer who evaluating WR31 is having a question regarding open VPN. They have been using a Linux based modem and uploaded a file that will handle the encryption. They are trying to do the same with the WR31 but hav…

---

## [EMMC Mounting Issue](https://forums.digi.com/t/emmc-mounting-issue/20484)

<div class="topic-metadata">

**Author:** [@dzhou](https://forums.digi.com/u/dzhou)\
**Replies:** 1\
**Last updated:** [May 17, 2019, 11:21am UTC](https://forums.digi.com/t/emmc-mounting-issue/20484 "2019-05-17T11:21:55Z")

</div>

Hi, I have imx6ul dev board and Digi’s release 2.2 yocto. My emmc drive is mount as /media/emmc. When I copy files into emmc every time, it also takes some flash memory space from the system because the emmc is mounte…

---

## [Difference between .lst file and Inspect-Disassemble at Address](https://forums.digi.com/t/difference-between-lst-file-and-inspect-disassemble-at-address/20395)

<div class="topic-metadata">

**Author:** [@rob.horton](https://forums.digi.com/u/rob.horton)\
**Replies:** 1\
**Last updated:** [April 9, 2019, 5:14pm UTC](https://forums.digi.com/t/difference-between-lst-file-and-inspect-disassemble-at-address/20395 "2019-04-09T17:14:04Z")

</div>

I have noticed that the list (.lst) file doesn’t contain all functions from the source code. However, if I am in debug mode in the development environment I can use Inspect-Disassemble at Address or Disassemble at Cursor…

---

## [Ts16 Mei config file](https://forums.digi.com/t/ts16-mei-config-file/20362)

<div class="topic-metadata">

**Author:** [@okrazon](https://forums.digi.com/u/okrazon)\
**Replies:** 0\
**Last updated:** [March 20, 2019, 7:54am UTC](https://forums.digi.com/t/ts16-mei-config-file/20362 "2019-03-20T07:54:13Z")

</div>

Hi, I have 19 Connectport Ts8 Mei in use, we were using a cfg file to restore configuration before using them, here is a sample of the file : "# PortServer TS 8 MEI Version 82000684\_T 08/18/2006 set config dhcp=off …

---

## [how to communicate Omron NJ PLC and DIGI TS4W using Ethernet/IP?](https://forums.digi.com/t/how-to-communicate-omron-nj-plc-and-digi-ts4w-using-ethernet-ip/19848)

<div class="topic-metadata">

**Author:** [@vinoth45](https://forums.digi.com/u/vinoth45)\
**Replies:** 1\
**Last updated:** [September 18, 2018, 3:14pm UTC](https://forums.digi.com/t/how-to-communicate-omron-nj-plc-and-digi-ts4w-using-ethernet-ip/19848 "2018-09-18T15:14:26Z")

</div>

hi, I want to communicate Omron NJ501-1300 PLC with DIGI TS4W using EthernetIP. So I need an EDS file for DIGI TS4W. Please help to provide me an EDS or XML file for DIGI TS4W. Thanks.

---

## [create logging file of data on gateway umts](https://forums.digi.com/t/create-logging-file-of-data-on-gateway-umts/18266)

<div class="topic-metadata">

**Author:** [@soilyjay](https://forums.digi.com/u/soilyjay)\
**Replies:** 0\
**Last updated:** [April 19, 2017, 2:04pm UTC](https://forums.digi.com/t/create-logging-file-of-data-on-gateway-umts/18266 "2017-04-19T14:04:34Z")

</div>

I am new to the xbee gateway and to python. I have six devices that send data to a coordinator. The coordinator then sends the data to the gateway as it is received. I send about 10 bytes of data separated by commas from…

---

## [how to set read/write permission to config.fac](https://forums.digi.com/t/how-to-set-read-write-permission-to-config-fac/18144)

<div class="topic-metadata">

**Author:** [@leitev01](https://forums.digi.com/u/leitev01)\
**Replies:** 1\
**Last updated:** [March 13, 2017, 6:26pm UTC](https://forums.digi.com/t/how-to-set-read-write-permission-to-config-fac/18144 "2017-03-13T18:26:54Z")

</div>

I want to set our private APN to config.fac. Then I can connect to the remote box if a factory reset is done. config.fac has default readonly permission

---

## [how to set read/write permission to file config.fac](https://forums.digi.com/t/how-to-set-read-write-permission-to-file-config-fac/18137)

<div class="topic-metadata">

**Author:** [@leitev01](https://forums.digi.com/u/leitev01)\
**Replies:** 1\
**Last updated:** [March 13, 2017, 6:26pm UTC](https://forums.digi.com/t/how-to-set-read-write-permission-to-file-config-fac/18137 "2017-03-13T18:26:37Z")

</div>

Is it possible to change permission for file config.fac to read/write ? Default permission is readonly I want the box to connect to a predefined APN after a factory reset.

---

## [How to access / Export WR21 Log file via Serial Com](https://forums.digi.com/t/how-to-access-export-wr21-log-file-via-serial-com/15387)

<div class="topic-metadata">

**Author:** [@nxgame](https://forums.digi.com/u/nxgame)\
**Replies:** 1\
**Last updated:** [September 10, 2015, 9:44am UTC](https://forums.digi.com/t/how-to-access-export-wr21-log-file-via-serial-com/15387 "2015-09-10T09:44:16Z")

</div>

How to access / Export WR21 Log file via Serial Com ? Please advise .

---

## [Appending Text File on Network with Xbee Sensor Data Through Gateway](https://forums.digi.com/t/appending-text-file-on-network-with-xbee-sensor-data-through-gateway/14669)

<div class="topic-metadata">

**Author:** [@radio\_davio](https://forums.digi.com/u/radio_davio)\
**Replies:** 2\
**Last updated:** [August 12, 2015, 3:53pm UTC](https://forums.digi.com/t/appending-text-file-on-network-with-xbee-sensor-data-through-gateway/14669 "2015-08-12T15:53:36Z")

</div>

I have a Python script for collecting XBee sensor data and appending a comma delimited text file. Right now I only am able to append a text file that resides within the XBee gateway memory. I’d like to be able to appen…

---

## [how i can sorting a name files according a distances in this codes](https://forums.digi.com/t/how-i-can-sorting-a-name-files-according-a-distances-in-this-codes/14924)

<div class="topic-metadata">

**Author:** [@muhned158](https://forums.digi.com/u/muhned158)\
**Replies:** 0\
**Last updated:** [June 4, 2015, 9:03am UTC](https://forums.digi.com/t/how-i-can-sorting-a-name-files-according-a-distances-in-this-codes/14924 "2015-06-04T09:03:34Z")

</div>

0 down vote favorite i try imagry processing (search indeaxtion) in my Db have obj1\_\_0 obj1\_\_5 files (tjrs multiply by 5 to 355) obj2\_\_0 same tricks … obj100\_\_355.la foction cellstr fact sorts by the alphabet which gi…

---

## [Why am I getting RCM2200 SRam file NoSpace error?](https://forums.digi.com/t/why-am-i-getting-rcm2200-sram-file-nospace-error/12631)

<div class="topic-metadata">

**Author:** [@soonki](https://forums.digi.com/u/soonki)\
**Replies:** 3\
**Last updated:** [November 6, 2014, 8:04am UTC](https://forums.digi.com/t/why-am-i-getting-rcm2200-sram-file-nospace-error/12631 "2014-11-06T08:04:38Z")

</div>

I am using RCM2200 board; DCRabbit ver 9.62 I try to set up an event log. My SRAM initialisation was done with #define FX\_MAX\_FILES 3 #define FS2\_USE\_PROGRAM\_FLASH 0 // …LIB\\BIOSLIB\\memconfig.lib: #define FS2\_RAM…

---

## [fwrite always returns 0](https://forums.digi.com/t/fwrite-always-returns-0/13725)

<div class="topic-metadata">

**Author:** [@cbrumley](https://forums.digi.com/u/cbrumley)\
**Replies:** 4\
**Last updated:** [October 14, 2014, 11:13pm UTC](https://forums.digi.com/t/fwrite-always-returns-0/13725 "2014-10-14T23:13:49Z")

</div>

I’m attempting to use fopen, fwrite, and fread to store data on a Digi Connect ME, as follows: printf("Opening %s for writing ",fname ); fp = fopen(fname, "wb"); if(fp == NULL) { printf("Unable to open %s for writing …

---

## [Next Gen/Legacy and Xbee S1 configuration confusion.........solved.](https://forums.digi.com/t/next-gen-legacy-and-xbee-s1-configuration-confusion-solved/12776)

<div class="topic-metadata">

**Author:** [@Justlearning](https://forums.digi.com/u/Justlearning)\
**Replies:** 2\
**Last updated:** [May 6, 2014, 10:36am UTC](https://forums.digi.com/t/next-gen-legacy-and-xbee-s1-configuration-confusion-solved/12776 "2014-05-06T10:36:53Z")

</div>

I solved my problem…reset everything and started over. This is my first experience with an Xbee (S1) device. I’m working on a project which calls for 2, 1mw Xbee’s with 1 usb adaptor, all Parallax brand. One Xbee will …

---

## [In which directory of a Digi TransPort do I have to load a python file so file executed when the unit starts up?](https://forums.digi.com/t/in-which-directory-of-a-digi-transport-do-i-have-to-load-a-python-file-so-file-executed-when-the-unit-starts-up/12555)

<div class="topic-metadata">

**Author:** [@vicesbur](https://forums.digi.com/u/vicesbur)\
**Replies:** 1\
**Last updated:** [March 21, 2014, 3:47am UTC](https://forums.digi.com/t/in-which-directory-of-a-digi-transport-do-i-have-to-load-a-python-file-so-file-executed-when-the-unit-starts-up/12555 "2014-03-21T03:47:04Z")

</div>

---

## [Unable to initialize file system](https://forums.digi.com/t/unable-to-initialize-file-system/12500)

<div class="topic-metadata">

**Author:** [@jiaxins](https://forums.digi.com/u/jiaxins)\
**Replies:** 6\
**Last updated:** [February 19, 2014, 11:01am UTC](https://forums.digi.com/t/unable-to-initialize-file-system/12500 "2014-02-19T11:01:32Z")

</div>

Hi, I’m working on an ConnectME application. It did not have file system, now I try to include file system. But when it boot up, it show message: netosStartup(): Unable to initialize file system And the ConnectME mu…

---

## [post file name](https://forums.digi.com/t/post-file-name/12514)

<div class="topic-metadata">

**Author:** [@SebB](https://forums.digi.com/u/SebB)\
**Replies:** 4\
**Last updated:** [February 11, 2014, 9:38am UTC](https://forums.digi.com/t/post-file-name/12514 "2014-02-11T09:38:58Z")

</div>

Hello, With AWS, I’ve got a webpage where I can upload files to the CC9P. What I would like to do, is to know the file name and file extension before to receive the content of the file. Doing this, from the same web u…

---

## [pc to arduino txt file transfer with zigbee](https://forums.digi.com/t/pc-to-arduino-txt-file-transfer-with-zigbee/11686)

<div class="topic-metadata">

**Author:** [@Vromoturion](https://forums.digi.com/u/Vromoturion)\
**Replies:** 0\
**Last updated:** [July 5, 2013, 3:02am UTC](https://forums.digi.com/t/pc-to-arduino-txt-file-transfer-with-zigbee/11686 "2013-07-05T03:02:02Z")

</div>

Hi, i want to send a txt file from pc to arduino through wireless zigbee protocol (using xbee pro S2B to arduino and an usb xstick as coordinator to pc) and then arduino will store it in sd memory card. Exists a strai…

---

## [Digi RealPort Setup Wizard has stopped working Error: 5](https://forums.digi.com/t/digi-realport-setup-wizard-has-stopped-working-error-5/11489)

<div class="topic-metadata">

**Author:** [@SalvadorCalls](https://forums.digi.com/u/SalvadorCalls)\
**Replies:** 1\
**Last updated:** [May 14, 2013, 5:41pm UTC](https://forums.digi.com/t/digi-realport-setup-wizard-has-stopped-working-error-5/11489 "2013-05-14T17:41:35Z")

</div>

Hi, We are trying to install the Digi RealPort to connect an IP device to a COM port in a Windows Server 2008 R2 64bits. This Server is a Virtual Machine of VMWare, and works in a ESX4 platform. We test with the Driver …
