# \#freescale **URL:** https://forums.digi.com/tag/freescale/335.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [S3B-900HP in API mode - can't detect 0x91, 0x92 frames](https://forums.digi.com/t/s3b-900hp-in-api-mode-cant-detect-0x91-0x92-frames/23234)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 3\ **Last updated:** [September 29, 2022, 8:49am UTC](https://forums.digi.com/t/s3b-900hp-in-api-mode-cant-detect-0x91-0x92-frames/23234 "2022-09-29T08:49:12Z")
I’m still having trouble receiving frames at my Programmable S3B-900HP (XBP9B-DMSTB002) from my non-programmable S3B-900HP (XBP9B-DMST002) remote radios that run in transparent mode. I can see their responses via command… --- ## [Not receiving 0x92 API messages on S3B-900HP Programmable node](https://forums.digi.com/t/not-receiving-0x92-api-messages-on-s3b-900hp-programmable-node/23228)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 4\ **Last updated:** [September 15, 2022, 2:40pm UTC](https://forums.digi.com/t/not-receiving-0x92-api-messages-on-s3b-900hp-programmable-node/23228 "2022-09-15T14:40:33Z")
I am trying to set up an I/O sampling network with S3B-900HP radios, but I have not received a single 0x92 message yet. I am developing in C within the CodeWarrior SDK. What handler would these responses show up in, or a… --- ## [Want to purchase (ISO) XBP9B-DMSTB002 (S3B 900HP Programmable RPSMA)](https://forums.digi.com/t/want-to-purchase-iso-xbp9b-dmstb002-s3b-900hp-programmable-rpsma/23224)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 0\ **Last updated:** [September 8, 2022, 11:30am UTC](https://forums.digi.com/t/want-to-purchase-iso-xbp9b-dmstb002-s3b-900hp-programmable-rpsma/23224 "2022-09-08T11:30:41Z")
I asked a Digi employee if they thought it was acceptable to post here given the absence of a buy/sell category on these forums, and they seemed to feel it is acceptable. I have been having a hard time securing the XBP9… --- ## [S3B-900HP Programmable - topology diagrams](https://forums.digi.com/t/s3b-900hp-programmable-topology-diagrams/22069)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 4\ **Last updated:** [January 14, 2021, 5:26am UTC](https://forums.digi.com/t/s3b-900hp-programmable-topology-diagrams/22069 "2021-01-14T05:26:33Z")
With the assumption that a custom UI would also need to be developed for whatever system is displaying it, is there sufficient enough access with what’s provided in the XBee CW SDK to allow a developer to create a simila… --- ## [S3B 900HP - RAM allocation issues for an 1:N coordinator node architecture](https://forums.digi.com/t/s3b-900hp-ram-allocation-issues-for-an-1-n-coordinator-node-architecture/22038)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 6\ **Last updated:** [December 11, 2020, 5:06pm UTC](https://forums.digi.com/t/s3b-900hp-ram-allocation-issues-for-an-1-n-coordinator-node-architecture/22038 "2020-12-11T17:06:50Z")
Good morning! I am having a blast with these modules after having re-familiarized more with these platforms. One area of concern I am having before a release, however, is the scalability of my architecture as it pertain… --- ## [900HP/S3B Programmable - out of the box expectations](https://forums.digi.com/t/900hp-s3b-programmable-out-of-the-box-expectations/21620)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 3\ **Last updated:** [August 4, 2020, 1:00pm UTC](https://forums.digi.com/t/900hp-s3b-programmable-out-of-the-box-expectations/21620 "2020-08-04T13:00:21Z")
I have developed an endpoint/router application for the 900HP/S3B Programmable. I am going to be sending synchronous snapshots every so often to an Admin node I expect to find using the same Node Identifier every time. O… --- ## [XBee S3B Pro 900HP Programmable: N to 1 communication?](https://forums.digi.com/t/xbee-s3b-pro-900hp-programmable-n-to-1-communication/21538)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 5\ **Last updated:** [July 27, 2020, 8:45am UTC](https://forums.digi.com/t/xbee-s3b-pro-900hp-programmable-n-to-1-communication/21538 "2020-07-27T08:45:18Z")
I am seeking examples on how an N to 1 topology might be implemented on the programmable variant of this device. 1 Admin/Coordinator node N Routers/endpoints that maybe send a data point or two Specifically I am inter… --- ## [Values not being set at init when observed with Multilink](https://forums.digi.com/t/values-not-being-set-at-init-when-observed-with-multilink/21591)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 1\ **Last updated:** [July 27, 2020, 8:37am UTC](https://forums.digi.com/t/values-not-being-set-at-init-when-observed-with-multilink/21591 "2020-07-27T08:37:18Z")
Is this ever experienced by anyone? I’ll simply initialize in main() at startup a uint8\_t variable = 0. This value seems to like the value 221 a lot, but I’m not sure I can wrap my head around why that is. Stepping thro… --- ## [Programmable XBee 900HP S3B - Developer expectations when using the MC9S08QE32??](https://forums.digi.com/t/programmable-xbee-900hp-s3b-developer-expectations-when-using-the-mc9s08qe32/21486)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 3\ **Last updated:** [June 24, 2020, 8:58am UTC](https://forums.digi.com/t/programmable-xbee-900hp-s3b-developer-expectations-when-using-the-mc9s08qe32/21486 "2020-06-24T08:58:37Z")
I have scoured through the S3B Programmable’s datasheet quite a bit (280 pages of it) and feel that it’s pretty straight forward, but one thing I can’t quite wrap my head around just yet is how the device is configured w… --- ## [Is this an appropriate use of the programmable S3B?](https://forums.digi.com/t/is-this-an-appropriate-use-of-the-programmable-s3b/21484)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 2\ **Last updated:** [June 24, 2020, 8:42am UTC](https://forums.digi.com/t/is-this-an-appropriate-use-of-the-programmable-s3b/21484 "2020-06-24T08:42:32Z")
I am planning on using this platform for end nodes scattered across a factory site that are each gathering a few points of sensor data. I purchased the programmable variant to test out because I felt the added flexibilit… --- ## [Programmable Freescale doesn´t boot on new batch of Xbees](https://forums.digi.com/t/programmable-freescale-doesn-t-boot-on-new-batch-of-xbees/20576)
**Author:** [@DaliborGuga](https://forums.digi.com/u/DaliborGuga)\ **Replies:** 0\ **Last updated:** [June 21, 2019, 9:39am UTC](https://forums.digi.com/t/programmable-freescale-doesn-t-boot-on-new-batch-of-xbees/20576 "2019-06-21T09:39:31Z")
I have a set of Programmable Xbee S3B and I have encountered problems with the embedded Freescale. I burn the SAME program from the examples provided by Digi (xbee\_custom\_digi\_cluster\_dm) in the SAME hardware, with the S… --- ## [Reset programmable XBee-PRO 900HP to show bootloader menu after installing application](https://forums.digi.com/t/reset-programmable-xbee-pro-900hp-to-show-bootloader-menu-after-installing-application/14121)
**Author:** [@rokyu](https://forums.digi.com/u/rokyu)\ **Replies:** 7\ **Last updated:** [August 8, 2017, 1:51pm UTC](https://forums.digi.com/t/reset-programmable-xbee-pro-900hp-to-show-bootloader-menu-after-installing-application/14121 "2017-08-08T13:51:57Z")
I built the “at\_cmd\_local” example XBee application project and installed it onto the programmable XBee using the bootloader “F” option (Update app). The program ran as expected. I now want to restore the XBee to show t… --- ## [XBee 868LP - Example code](https://forums.digi.com/t/xbee-868lp-example-code/15349)
**Author:** [@stranet](https://forums.digi.com/u/stranet)\ **Replies:** 5\ **Last updated:** [June 10, 2016, 8:44am UTC](https://forums.digi.com/t/xbee-868lp-example-code/15349 "2016-06-10T08:44:11Z")
Hi, I’m trying to work with a XBee 868LP. I’ve downloaded CodeWarrior and I can correctly program the mc9S08QE32. I’m trying to send AT command to the xbee module but I don’t see anything! :frowning: Is possible to d… --- ## [interoperability between XBee and Free scale board](https://forums.digi.com/t/interoperability-between-xbee-and-free-scale-board/15660)
**Author:** [@subbanarasaiah](https://forums.digi.com/u/subbanarasaiah)\ **Replies:** 6\ **Last updated:** [November 13, 2015, 7:58am UTC](https://forums.digi.com/t/interoperability-between-xbee-and-free-scale-board/15660 "2015-11-13T07:58:54Z")
How can we do interoperability with XBee? presently I am working with XBee PROS2B. Now I am able to send data from one device to other device(by using two XBee PROS2B). I want to communicate between two devices which a… --- ## [Bootloader application update kills bootloader?](https://forums.digi.com/t/bootloader-application-update-kills-bootloader/14948)
**Author:** [@nswsoft](https://forums.digi.com/u/nswsoft)\ **Replies:** 1\ **Last updated:** [June 9, 2015, 10:30am UTC](https://forums.digi.com/t/bootloader-application-update-kills-bootloader/14948 "2015-06-09T10:30:34Z")
Hi! I programmed the programmable Xbee’s freescale MCU through the bootloader. (I dont have a programmer/debugger kit) I uploaded the knight rider application demo example for XBIB development panel. After uploading,… --- ## [Low power operation in programmable XBee PRO: differences in power profiles](https://forums.digi.com/t/low-power-operation-in-programmable-xbee-pro-differences-in-power-profiles/11421)
**Author:** [@Paulo\_Peres](https://forums.digi.com/u/Paulo_Peres)\ **Replies:** 3\ **Last updated:** [March 10, 2014, 1:49am UTC](https://forums.digi.com/t/low-power-operation-in-programmable-xbee-pro-differences-in-power-profiles/11421 "2014-03-10T01:49:39Z")
Hi all, I´m working with 2 variants of same project using XBee PRO programmable (Freescale S08QE32 core). The #1 is a remote temperature sensor configured to sleep for several minutes between each data transfer. It use…