# \#gpio-initial-states

**URL:** https://forums.digi.com/tag/gpio-initial-states/129.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [ConnectCore UL Express - how to quickly get PWM or GPIO high right after system reset?](https://forums.digi.com/t/connectcore-ul-express-how-to-quickly-get-pwm-or-gpio-high-right-after-system-reset/19501)

<div class="topic-metadata">

**Author:** [@stejfisch](https://forums.digi.com/u/stejfisch)\
**Replies:** 4\
**Last updated:** [May 30, 2018, 11:16am UTC](https://forums.digi.com/t/connectcore-ul-express-how-to-quickly-get-pwm-or-gpio-high-right-after-system-reset/19501 "2018-05-30T11:16:59Z")

</div>

I’m getting started with the ConnectCore UL Express. The plan is to have it replace a microcontroller in an existing product, and among the many ways I plan on using it, one is to have the PWM1 module control a motor. Wh…

---

## [GPIO initial state](https://forums.digi.com/t/gpio-initial-state/3734)

<div class="topic-metadata">

**Author:** [@junjun](https://forums.digi.com/u/junjun)\
**Replies:** 1\
**Last updated:** [November 2, 2007, 4:14pm UTC](https://forums.digi.com/t/gpio-initial-state/3734 "2007-11-02T16:14:16Z")

</div>

Digi Connect ME devices now allow (as of firmware version F5) the initial state of the GPIO (upon power up) to be configurable so a GPIO “out” pin can be set to be de-asserted upon power up. It is straight forward to do …

---

## [Initial state of GPIO?](https://forums.digi.com/t/initial-state-of-gpio/4074)

<div class="topic-metadata">

**Author:** [@jofi](https://forums.digi.com/u/jofi)\
**Replies:** 3\
**Last updated:** [May 26, 2005, 4:03pm UTC](https://forums.digi.com/t/initial-state-of-gpio/4074 "2005-05-26T16:03:50Z")

</div>

Hello! I have recently discovered that the initial state of the GPIO is always ‘1’ = asserted. This won’t work in my application, I want them to be ‘0’= de-asserted then I power up the device. Does anyone have any ideas…

---

## [Initial state of GPIO pins](https://forums.digi.com/t/initial-state-of-gpio-pins/4149)

<div class="topic-metadata">

**Author:** [@sijuma00](https://forums.digi.com/u/sijuma00)\
**Replies:** 3\
**Last updated:** [August 9, 2004, 11:38am UTC](https://forums.digi.com/t/initial-state-of-gpio-pins/4149 "2004-08-09T11:38:46Z")

</div>

Hi there. I am coding a little remotecontrol solution based on the sample web-server. With the code I can change the state of some GPIO pins with http-form. So at this point I have three checkboxes and state of GPIO1-3 …