# \#gps **URL:** https://forums.digi.com/tag/gps/700.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [When starting Digi Transport with GPS attached, no internet connectivity is achieved](https://forums.digi.com/t/when-starting-digi-transport-with-gps-attached-no-internet-connectivity-is-achieved/22957)
**Author:** [@hwilmers](https://forums.digi.com/u/hwilmers)\ **Replies:** 1\ **Last updated:** [February 21, 2022, 7:00pm UTC](https://forums.digi.com/t/when-starting-digi-transport-with-gps-attached-no-internet-connectivity-is-achieved/22957 "2022-02-21T19:00:07Z")
When we start a Digi transport router with the USB GPS attached, it does not provide internet connectivity to the attached network clients. Removing the GPS and starting again results in correct connectivity. We found … --- ## [XBee Pro S3B's not communicating](https://forums.digi.com/t/xbee-pro-s3bs-not-communicating/22077)
**Author:** [@joeRCav8r](https://forums.digi.com/u/joeRCav8r)\ **Replies:** 3\ **Last updated:** [February 4, 2021, 10:53am UTC](https://forums.digi.com/t/xbee-pro-s3bs-not-communicating/22077 "2021-02-04T10:53:44Z")
I have two XBee Pro S3B’s connected to F9P GPS sensors for RTK. For RTK to work, the XBee radios have to send messages back and forth. I have not been able to make this communication happen. I set both baud rates to 1… --- ## [How can I configure XBee Pro S3B XBP9B ?](https://forums.digi.com/t/how-can-i-configure-xbee-pro-s3b-xbp9b/21636)
**Author:** [@gunesmadrali](https://forums.digi.com/u/gunesmadrali)\ **Replies:** 2\ **Last updated:** [August 7, 2020, 4:27am UTC](https://forums.digi.com/t/how-can-i-configure-xbee-pro-s3b-xbp9b/21636 "2020-08-07T04:27:21Z")
https://spin.atomicobject.com/2016/07/18/xbee-tutorial/ I had XBEE Pro S2C and I used to configure them like the link above. But I didn’t understand the functions and settings of Pro S3B. I am trying to configure them… --- ## [3 XBee -Star Network-Arduino-GPS](https://forums.digi.com/t/3-xbee-star-network-arduino-gps/21547)
**Author:** [@gunesmadrali](https://forums.digi.com/u/gunesmadrali)\ **Replies:** 6\ **Last updated:** [July 15, 2020, 3:11pm UTC](https://forums.digi.com/t/3-xbee-star-network-arduino-gps/21547 "2020-07-15T15:11:14Z")
I have 3 XBee PRO S2C and 3 Arduino MEGA and 2 GPS GY-NEO 6MV2. I would like to transmit GPS datas from 2 Router XBee (they are connected to arduino) to coordinator XBee (also connected to Arduino and PC). But I don’t … --- ## [Can the GPS facility on a WR44-U be used as a tracker?](https://forums.digi.com/t/can-the-gps-facility-on-a-wr44-u-be-used-as-a-tracker/21502)
**Author:** [@DMShell](https://forums.digi.com/u/DMShell)\ **Replies:** 1\ **Last updated:** [June 30, 2020, 4:40am UTC](https://forums.digi.com/t/can-the-gps-facility-on-a-wr44-u-be-used-as-a-tracker/21502 "2020-06-30T04:40:11Z")
I have acquired a few units (v1) that were originally fitted to railway vehicles as part of the remote monitoring system. I am going to build a Wi-fi access point and was also interested in using the GPS facility so we c… --- ## [Xbee 3 wireless link between F9P GPS receivers](https://forums.digi.com/t/xbee-3-wireless-link-between-f9p-gps-receivers/21297)
**Author:** [@RicDG](https://forums.digi.com/u/RicDG)\ **Replies:** 3\ **Last updated:** [April 21, 2020, 8:15am UTC](https://forums.digi.com/t/xbee-3-wireless-link-between-f9p-gps-receivers/21297 "2020-04-21T08:15:38Z")
I want to send RTCM correction messages from the Sparkfun F9P base to F9P rover via Xbee. I have RTK fixed mode on my rover F9P using a wired connection, so I know the two F9P’s are correctly configured per Ublox’s Movin… --- ## [How to configure go-fencing and alerts on a WR21](https://forums.digi.com/t/how-to-configure-go-fencing-and-alerts-on-a-wr21/20925)
**Author:** [@morneaultp](https://forums.digi.com/u/morneaultp)\ **Replies:** 1\ **Last updated:** [November 28, 2019, 2:21pm UTC](https://forums.digi.com/t/how-to-configure-go-fencing-and-alerts-on-a-wr21/20925 "2019-11-28T14:21:03Z")
Hello I have a WR21 cellular unit with GPS and I want to configure a geo-fence and email alert so that I will know if the device moves out of the fence. I searched the forum and could not find anything on this. Thank Y… --- ## [Sending gps commands through xbee](https://forums.digi.com/t/sending-gps-commands-through-xbee/20641)
**Author:** [@daveb123](https://forums.digi.com/u/daveb123)\ **Replies:** 0\ **Last updated:** [July 17, 2019, 10:49am UTC](https://forums.digi.com/t/sending-gps-commands-through-xbee/20641 "2019-07-17T10:49:23Z")
I am currently working with a setup like this: gps adafruit receiver -\> xbee 1 \[100 ft\] xbee 2 -\> arduino I have managed to figure out how to send the necessary gps data from the receiver to my arduino and print it. I … --- ## [How to triangulate XBee3 Nb-IoT module using cellular network ?](https://forums.digi.com/t/how-to-triangulate-xbee3-nb-iot-module-using-cellular-network/20625)
**Author:** [@rajib](https://forums.digi.com/u/rajib)\ **Replies:** 1\ **Last updated:** [July 11, 2019, 3:56pm UTC](https://forums.digi.com/t/how-to-triangulate-xbee3-nb-iot-module-using-cellular-network/20625 "2019-07-11T15:56:22Z")
Trying to use cellular networks to give me an approximate idea about the location of the device. So that we can save money by not using a GPS module. I know about the AS AT-command ( https://www.digi.com/resources/docum… --- ## [How to connect Android directly to XBee (XB24-ZB) in ZigBee Coordinator AT Mode?](https://forums.digi.com/t/how-to-connect-android-directly-to-xbee-xb24-zb-in-zigbee-coordinator-at-mode/20064)
**Author:** [@nizam95](https://forums.digi.com/u/nizam95)\ **Replies:** 0\ **Last updated:** [December 20, 2018, 5:39pm UTC](https://forums.digi.com/t/how-to-connect-android-directly-to-xbee-xb24-zb-in-zigbee-coordinator-at-mode/20064 "2018-12-20T17:39:14Z")
I need to send GPS data from ublox neo 6m and send to smartphone through xbee. how xbee can connect directly to smartphone without using any network except smartphone and xbee network itself? Xbee: XB24-ZB, ZigBee Coor… --- ## [Sending GPS data over XBEE RF link problem](https://forums.digi.com/t/sending-gps-data-over-xbee-rf-link-problem/19689)
**Author:** [@Don23805](https://forums.digi.com/u/Don23805)\ **Replies:** 1\ **Last updated:** [July 10, 2018, 4:57am UTC](https://forums.digi.com/t/sending-gps-data-over-xbee-rf-link-problem/19689 "2018-07-10T04:57:03Z")
I have two XBEE-PRO XSC(S3B) units interfaced through the Sparkfun Explorer USB interface boards. If I plug these into two PCs and run XCTU in terminal mode, they talk to each other just fine. My application is to hav… --- ## [How can I directly connect a gps module to an xbee?](https://forums.digi.com/t/how-can-i-directly-connect-a-gps-module-to-an-xbee/15568)
**Author:** [@lizards](https://forums.digi.com/u/lizards)\ **Replies:** 2\ **Last updated:** [June 26, 2018, 11:15am UTC](https://forums.digi.com/t/how-can-i-directly-connect-a-gps-module-to-an-xbee/15568 "2018-06-26T11:15:45Z")
--- ## [Digi XBee® Cellular LTE-M GPS Support](https://forums.digi.com/t/digi-xbee-cellular-lte-m-gps-support/18555)
**Author:** [@anuja.upale](https://forums.digi.com/u/anuja.upale)\ **Replies:** 1\ **Last updated:** [July 19, 2017, 11:11am UTC](https://forums.digi.com/t/digi-xbee-cellular-lte-m-gps-support/18555 "2017-07-19T11:11:06Z")
Does Digi XBee® Cellular LTE-M support GPS or GNSS? If yes, will the initial release will support it? Thanks, Anuja Upale --- ## [Sending GPS data to more than two connected IP devices (WR44)](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672)
**Author:** [@DC1](https://forums.digi.com/u/DC1)\ **Replies:** 2\ **Last updated:** [January 20, 2017, 1:58pm UTC](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672 "2017-01-20T13:58:10Z")
I’d like to send GPS data from the Digi Transport WR44 to three other IP devices. In the in web interface under configuration - position \>GPS, there are only two fields available. They are IP connection-1 and IP connect… --- ## [Way to pull GPS infomation from XBEE 802.15.4 s2c radio](https://forums.digi.com/t/way-to-pull-gps-infomation-from-xbee-802-15-4-s2c-radio/17853)
**Author:** [@toby](https://forums.digi.com/u/toby)\ **Replies:** 2\ **Last updated:** [January 5, 2017, 5:21pm UTC](https://forums.digi.com/t/way-to-pull-gps-infomation-from-xbee-802-15-4-s2c-radio/17853 "2017-01-05T17:21:56Z")
Hi, Way to pull GPS infomation from XBEE 802-15.4 s2c radio ? I am implmenting a light weight garden sensor that runs a XBEE 802.15.4 s2c radio on battery, powered by solar. I have some digi grove development boards t… --- ## [Sending GPS Location via xbee](https://forums.digi.com/t/sending-gps-location-via-xbee/17356)
**Author:** [@lloydturner](https://forums.digi.com/u/lloydturner)\ **Replies:** 1\ **Last updated:** [September 8, 2016, 11:01am UTC](https://forums.digi.com/t/sending-gps-location-via-xbee/17356 "2016-09-08T11:01:41Z")
Hi There! I’m learning as I go along with this, so if anything is blatantly wrong I do apologise! I have recently started a project in which I aim to send gps coordinates via two xbees, to display within the serial mon… --- ## [GPS Receiver to BL4S200 PortC Connection](https://forums.digi.com/t/gps-receiver-to-bl4s200-portc-connection/17140)
**Author:** [@isaacpoh](https://forums.digi.com/u/isaacpoh)\ **Replies:** 1\ **Last updated:** [August 2, 2016, 5:45pm UTC](https://forums.digi.com/t/gps-receiver-to-bl4s200-portc-connection/17140 "2016-08-02T17:45:30Z")
In Samples Code GPS.C it assumes hardware used GPS receiver attached to serial port C, May I know how to connect the GPS receiver wire to BL4S200 portC (RS485)? Please help and advise. --- ## [Flarm GPS with DigiMesh API mode](https://forums.digi.com/t/flarm-gps-with-digimesh-api-mode/16594)
**Author:** [@fbritop](https://forums.digi.com/u/fbritop)\ **Replies:** 3\ **Last updated:** [April 15, 2016, 11:37am UTC](https://forums.digi.com/t/flarm-gps-with-digimesh-api-mode/16594 "2016-04-15T11:37:39Z")
We have an aproach we want to test. There is one Base Station (A) and two moving targets (B and C which are Gliders) The FLARM GPS unit transmit NMEA messages thorugh a serian port with an RJ45 attached to a USB Port. … --- ## [Will 3 wires, 3.3v, gnd, and tx be sufficient for Ublox Lea 6 to pass NMEA sentences to xbee 900 Pro?](https://forums.digi.com/t/will-3-wires-3-3v-gnd-and-tx-be-sufficient-for-ublox-lea-6-to-pass-nmea-sentences-to-xbee-900-pro/15605)
**Author:** [@Coastwise](https://forums.digi.com/u/Coastwise)\ **Replies:** 1\ **Last updated:** [October 16, 2015, 1:56pm UTC](https://forums.digi.com/t/will-3-wires-3-3v-gnd-and-tx-be-sufficient-for-ublox-lea-6-to-pass-nmea-sentences-to-xbee-900-pro/15605 "2015-10-16T13:56:02Z")
--- ## [GPS fix error and Initialization String Question](https://forums.digi.com/t/gps-fix-error-and-initialization-string-question/15551)
**Author:** [@alex1234](https://forums.digi.com/u/alex1234)\ **Replies:** 1\ **Last updated:** [October 14, 2015, 4:56am UTC](https://forums.digi.com/t/gps-fix-error-and-initialization-string-question/15551 "2015-10-14T04:56:40Z")
Hello, I want to use GPS function on WR41v2, but it’s always show no fix or invalid in position page. I enable local monitoring checkbox and type ‘at/gps’ command in serial port monitor, but it always show: $GPRMC,V,N5… --- ## [Can I read GPS data from remote XBee?](https://forums.digi.com/t/can-i-read-gps-data-from-remote-xbee/15550)
**Author:** [@isjeeeeee](https://forums.digi.com/u/isjeeeeee)\ **Replies:** 1\ **Last updated:** [October 12, 2015, 1:51pm UTC](https://forums.digi.com/t/can-i-read-gps-data-from-remote-xbee/15550 "2015-10-12T13:51:33Z")
I want to send GPS data from my GPS Module to the RX pin of a Router XBee directly. Then send it to a Coordinator XBee then parse it with an Arduino. The problem is the GPS module is sending serial data. How can I read t… --- ## [Looking for help setting up real-time GPS tracking for high altitude balloon.](https://forums.digi.com/t/looking-for-help-setting-up-real-time-gps-tracking-for-high-altitude-balloon/15463)
**Author:** [@sr1stratosphere](https://forums.digi.com/u/sr1stratosphere)\ **Replies:** 1\ **Last updated:** [September 29, 2015, 2:55pm UTC](https://forums.digi.com/t/looking-for-help-setting-up-real-time-gps-tracking-for-high-altitude-balloon/15463 "2015-09-29T14:55:30Z")
I was pointed in this direction by the people over at Arduino and Adafruits forums in regards to some help about a project I’m starting. I have already launched a couple of high altitude balloons with great success but … --- ## [Can I connect GPS module directly to Xbee Pro 900 HP and use it in a mesh network with other xbees connected with gps ?](https://forums.digi.com/t/can-i-connect-gps-module-directly-to-xbee-pro-900-hp-and-use-it-in-a-mesh-network-with-other-xbees-connected-with-gps/15191)
**Author:** [@anujsanghavi](https://forums.digi.com/u/anujsanghavi)\ **Replies:** 1\ **Last updated:** [September 2, 2015, 1:06pm UTC](https://forums.digi.com/t/can-i-connect-gps-module-directly-to-xbee-pro-900-hp-and-use-it-in-a-mesh-network-with-other-xbees-connected-with-gps/15191 "2015-09-02T13:06:58Z")
Can I connect GPS module directly to Xbee Pro 900 HP and use it in a mesh network with other xbees connected with gps ? I am trying to program Xbee in a way that they can transmit gps data to co-ordinator without any m… --- ## [XBee Pro 868 and GPS UART communication](https://forums.digi.com/t/xbee-pro-868-and-gps-uart-communication/15336)
**Author:** [@gpio](https://forums.digi.com/u/gpio)\ **Replies:** 3\ **Last updated:** [August 31, 2015, 2:57am UTC](https://forums.digi.com/t/xbee-pro-868-and-gps-uart-communication/15336 "2015-08-31T02:57:01Z")
Hello, I need to connect an XBee Pro 868 with a GPS module, Can I connect via UART? Then, from a remote XBee, connected to this and get the values of the GPS. This is the GPS module datasheet: http://www.infineon.co… --- ## [How do I use the GPS module on my Transport WR44v2 as a source to set the time on it?](https://forums.digi.com/t/how-do-i-use-the-gps-module-on-my-transport-wr44v2-as-a-source-to-set-the-time-on-it/14232)
**Author:** [@cndnheat](https://forums.digi.com/u/cndnheat)\ **Replies:** 3\ **Last updated:** [April 21, 2015, 9:12am UTC](https://forums.digi.com/t/how-do-i-use-the-gps-module-on-my-transport-wr44v2-as-a-source-to-set-the-time-on-it/14232 "2015-04-21T09:12:23Z")
I am looking for a “walk-through” on this. Thanks. --- ## [How do I send GPS data from the WR44 GPS module over the serial port?](https://forums.digi.com/t/how-do-i-send-gps-data-from-the-wr44-gps-module-over-the-serial-port/14021)
**Author:** [@kruegdr](https://forums.digi.com/u/kruegdr)\ **Replies:** 1\ **Last updated:** [January 20, 2015, 10:26am UTC](https://forums.digi.com/t/how-do-i-send-gps-data-from-the-wr44-gps-module-over-the-serial-port/14021 "2015-01-20T10:26:55Z")
I was reviewing the GPS demo and the WR44 manual, and it seems there is functionality to send GPS data from the on-board GPS module to an IP address, or take serial data from an external GPS and use it within the WR44. T… --- ## [Using GlobalSat GPS receiver with DigiWR41](https://forums.digi.com/t/using-globalsat-gps-receiver-with-digiwr41/13686)
**Author:** [@DigiFarm](https://forums.digi.com/u/DigiFarm)\ **Replies:** 1\ **Last updated:** [October 6, 2014, 3:10am UTC](https://forums.digi.com/t/using-globalsat-gps-receiver-with-digiwr41/13686 "2014-10-06T03:10:18Z")
According to a few emails from support I should be able to use a GlobalSat BU-353S4 usb GPS receiver to get position data into a WR41 or WR21. How can I go about doing this? I need to send a GGA string to a certain IP a… --- ## [Is it possible to switch the gps receiver to sirf binary protocol on a WR41](https://forums.digi.com/t/is-it-possible-to-switch-the-gps-receiver-to-sirf-binary-protocol-on-a-wr41/13599)
**Author:** [@TamasMoroczG4S](https://forums.digi.com/u/TamasMoroczG4S)\ **Replies:** 1\ **Last updated:** [September 16, 2014, 2:48am UTC](https://forums.digi.com/t/is-it-possible-to-switch-the-gps-receiver-to-sirf-binary-protocol-on-a-wr41/13599 "2014-09-16T02:48:23Z")
--- ## [Using a DIGITransport WR44R we lose the gps signal](https://forums.digi.com/t/using-a-digitransport-wr44r-we-lose-the-gps-signal/13418)
**Author:** [@Peter\_TR](https://forums.digi.com/u/Peter_TR)\ **Replies:** 2\ **Last updated:** [August 22, 2014, 1:00am UTC](https://forums.digi.com/t/using-a-digitransport-wr44r-we-lose-the-gps-signal/13418 "2014-08-22T01:00:10Z")
The trains parks under a roof for about 20 minutes and when the train starts moving again the recovery time is very long. Is there someway to speed this up ? In the INIT string, should something be included that we hav… --- ## [Ideal XStream PKG Configuration for 16 modems](https://forums.digi.com/t/ideal-xstream-pkg-configuration-for-16-modems/11835)
**Author:** [@wakes007](https://forums.digi.com/u/wakes007)\ **Replies:** 1\ **Last updated:** [May 2, 2014, 2:41pm UTC](https://forums.digi.com/t/ideal-xstream-pkg-configuration-for-16-modems/11835 "2014-05-02T14:41:45Z")
Hello, I’m in the process of setting up and testing 16 RF modems to transmit and receive GPS data. 8 will be transmitting the GPS data from various vessels, while the other 8 will be receiving the data, connected to an … [Next page](https://forums.digi.com/tag/gps/700.md?match_all_tags=true&page=1&tags%5B%5D=gps)