# \#hardware **URL:** https://forums.digi.com/tag/hardware/7.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Program the Yocto firmware](https://forums.digi.com/t/program-the-yocto-firmware/38739)
**Author:** [@hamanrf](https://forums.digi.com/u/hamanrf)\ **Replies:** 1\ **Last updated:** [October 14, 2026, 8:49am UTC](https://forums.digi.com/t/program-the-yocto-firmware/38739 "2026-10-14T08:49:13Z")
Hi every one, I am following steps on ‘ConnectCore 8M Nano’ to program the Yocto firmware. I did it via using uSD card. Then I try by using using UUU I connect both micro USBs cable from my PC to Console port and Rec… --- ## [Typo at your doc "ConnectCore MP25 System-on-Module Hardware Reference Manual"](https://forums.digi.com/t/typo-at-your-doc-connectcore-mp25-system-on-module-hardware-reference-manual/38707)
**Author:** [@Alon](https://forums.digi.com/u/Alon)\ **Replies:** 2\ **Last updated:** [September 22, 2026, 7:52am UTC](https://forums.digi.com/t/typo-at-your-doc-connectcore-mp25-system-on-module-hardware-reference-manual/38707 "2026-09-22T07:52:18Z")
Digi has a typo in the doc “ConnectCore MP25 System-on-Module Hardware Reference Manual” One of the output powers, which should be 1.8V (1V8) was mistakenly typed as “2V8” See the attached picture from page 13 of this … --- ## [KiCad Footprint Not Available for CC-WST-DW69-NM](https://forums.digi.com/t/kicad-footprint-not-available-for-cc-wst-dw69-nm/38653)
**Author:** [@devidmark](https://forums.digi.com/u/devidmark)\ **Replies:** 0\ **Last updated:** [August 19, 2026, 6:40am UTC](https://forums.digi.com/t/kicad-footprint-not-available-for-cc-wst-dw69-nm/38653 "2026-08-19T06:40:05Z")
Hello, I’m working on a PCB design that requires the component with Manufacturer Part Number CC-WST-DW69-NM. However, I’m unable to find a KiCad-compatible footprint for this part. The footprint provided by the DIGI is… --- ## [Can CCMP25 VDDIO be set to 1.8V?](https://forums.digi.com/t/can-ccmp25-vddio-be-set-to-1-8v/38535)
**Author:** [@FvM](https://forums.digi.com/u/FvM)\ **Replies:** 0\ **Last updated:** [June 19, 2026, 4:29pm UTC](https://forums.digi.com/t/can-ccmp25-vddio-be-set-to-1-8v/38535 "2026-06-19T16:29:19Z")
Hello, CCMP25 SoM has VDDIO regularly set to 3.3V. We want to use the module as replacement in a system with 1.8V VDDIO. My question is if on-module usage of VDDIO (STPMIC25 BUCK4 output) will be compatible with this se… --- ## [Kernel panic and Bluetooth degradation on ConnectCore MP25 (DEY Yocto)](https://forums.digi.com/t/kernel-panic-and-bluetooth-degradation-on-connectcore-mp25-dey-yocto/38294)
**Author:** [@ASN](https://forums.digi.com/u/ASN)\ **Replies:** 8\ **Last updated:** [June 4, 2026, 12:54pm UTC](https://forums.digi.com/t/kernel-panic-and-bluetooth-degradation-on-connectcore-mp25-dey-yocto/38294 "2026-06-04T12:54:22Z")
Hello, I am working with the Digi Embedded Yocto distribution on a ConnectCore MP25 platform, following the official tutorial: Install Digi Embedded Yocto | ConnectCore MP25 The system is based on the dey-image-webkit … --- ## [Digi board cc-sb-wmx-kk8d](https://forums.digi.com/t/digi-board-cc-sb-wmx-kk8d/38493)
**Author:** [@sarvesh.ghorpade](https://forums.digi.com/u/sarvesh.ghorpade)\ **Replies:** 0\ **Last updated:** [May 28, 2026, 11:37am UTC](https://forums.digi.com/t/digi-board-cc-sb-wmx-kk8d/38493 "2026-05-28T11:37:06Z")
Dear Community We are currently using Digi Board CC-SB-WMX-KK8D, and having issues with the screen flickering(touch screen), when the screen is operated the flickering is observed dramatically. Does anyone face the same… --- ## [How to configure DIGI EZ 4 for Ovation 4.0 Scada Protocol](https://forums.digi.com/t/how-to-configure-digi-ez-4-for-ovation-4-0-scada-protocol/38297)
**Author:** [@jberzunza](https://forums.digi.com/u/jberzunza)\ **Replies:** 1\ **Last updated:** [April 7, 2026, 9:52am UTC](https://forums.digi.com/t/how-to-configure-digi-ez-4-for-ovation-4-0-scada-protocol/38297 "2026-04-07T09:52:52Z")
HI there. I have the following questions regarding the configuration of a DIGI EZ 4 within an Ovation 4.0 communications DROP using the DNP3.0 Protocol Analyzer: How are the communication ports of a DIGI EZ 4 configu… --- ## [Number of USB ports](https://forums.digi.com/t/number-of-usb-ports/38246)
**Author:** [@dattuprasad78](https://forums.digi.com/u/dattuprasad78)\ **Replies:** 5\ **Last updated:** [March 12, 2026, 9:57pm UTC](https://forums.digi.com/t/number-of-usb-ports/38246 "2026-03-12T21:57:30Z")
HI, Is there a limitation on number of USB ports that could be plugged through a USB hub into one USB port of Anywhere USB? My setup is like, USB hub → port 1, USB hub → port 2…. USB hub –\> Port 5. Each USB hub is a 1… --- ## [CCMP25-DVK Vref+ Pin at 0V](https://forums.digi.com/t/ccmp25-dvk-vref-pin-at-0v/38243)
**Author:** [@dforman](https://forums.digi.com/u/dforman)\ **Replies:** 0\ **Last updated:** [February 27, 2026, 4:49pm UTC](https://forums.digi.com/t/ccmp25-dvk-vref-pin-at-0v/38243 "2026-02-27T16:49:41Z")
I am using DEY 5.0. I have made my own custom machine based on the ccmp25-dvk. I made a modification to the devicetree to use an internal reference instead of the external for the ADC (see snippet below). I was expecting… --- ## [Digiport EZ16 RS422 termination?](https://forums.digi.com/t/digiport-ez16-rs422-termination/37993)
**Author:** [@Bandola](https://forums.digi.com/u/Bandola)\ **Replies:** 2\ **Last updated:** [January 26, 2026, 5:22pm UTC](https://forums.digi.com/t/digiport-ez16-rs422-termination/37993 "2026-01-26T17:22:13Z")
Hi, I cannot find any information on what the “Termination” selection does for a RS422 port, normally you terminate the RXC+/- receiving side with a 100-120 ohm resistor. Is that the case here ? Regards, Ola --- ## [Can't use SD card and run "run install\_linux\_fw\_sd" command](https://forums.digi.com/t/cant-use-sd-card-and-run-run-install-linux-fw-sd-command/36976)
**Author:** [@bilal1](https://forums.digi.com/u/bilal1)\ **Replies:** 1\ **Last updated:** [December 16, 2025, 4:04pm UTC](https://forums.digi.com/t/cant-use-sd-card-and-run-run-install-linux-fw-sd-command/36976 "2025-12-16T16:04:46Z")
Hi, I am trying to boot from an SD card as mentioned in the getting started process where I insert a Fat formatted SD card then stop the autoboot and run the following command: “run install\_linux\_fw\_sd”. I was able to … --- ## [About the XBEE SX868 MHz rf module range](https://forums.digi.com/t/about-the-xbee-sx868-mhz-rf-module-range/37805)
**Author:** [@Dr.turan](https://forums.digi.com/u/Dr.turan)\ **Replies:** 1\ **Last updated:** [September 3, 2025, 1:01pm UTC](https://forums.digi.com/t/about-the-xbee-sx868-mhz-rf-module-range/37805 "2025-09-03T13:01:56Z")
Hi there, What parameters should I adjust to increase my distance for the XBEE module on the XCTU programme? RF module:Digi Xbee SX868MHz rf module. Thanks for helping me. --- ## [Frequent Digi XBee Pro SX module antenna output failures](https://forums.digi.com/t/frequent-digi-xbee-pro-sx-module-antenna-output-failures/37553)
**Author:** [@Daytech](https://forums.digi.com/u/Daytech)\ **Replies:** 3\ **Last updated:** [August 1, 2025, 10:47am UTC](https://forums.digi.com/t/frequent-digi-xbee-pro-sx-module-antenna-output-failures/37553 "2025-08-01T10:47:10Z")
Hello all, I’m on a team at a startup who are using 900MHz XBee SX and XBee Pro SX modules for as part of a project. The XBee SX modules have been working flawlessly, but many of the Pro SX modules have failed with shor… --- ## [Keeping i.MX93 in sleep mode when BT disconnected and Wakeup on Connection](https://forums.digi.com/t/keeping-i-mx93-in-sleep-mode-when-bt-disconnected-and-wakeup-on-connection/37574)
**Author:** [@Nag](https://forums.digi.com/u/Nag)\ **Replies:** 1\ **Last updated:** [July 30, 2025, 1:06pm UTC](https://forums.digi.com/t/keeping-i-mx93-in-sleep-mode-when-bt-disconnected-and-wakeup-on-connection/37574 "2025-07-30T13:06:16Z")
Hello, I’m trying to enter deep sleep using: echo mem \> /sys/power/state But suspend fails with the following logs: \[ 79.013782\] PM: suspend entry (deep) \[ 79.020906\] Filesystems sync: 0.003 seconds \[ 79.0810… --- ## [End device stuck if ZigBee network is not available](https://forums.digi.com/t/end-device-stuck-if-zigbee-network-is-not-available/37181)
**Author:** [@Ashwani](https://forums.digi.com/u/Ashwani)\ **Replies:** 4\ **Last updated:** [June 23, 2025, 12:03pm UTC](https://forums.digi.com/t/end-device-stuck-if-zigbee-network-is-not-available/37181 "2025-06-23T12:03:22Z")
Issue Description: Our end device operates in sleep mode. When the button is pressed, it wakes up and sends data using MicroPython script, the transmission is a unicast. Once the button is released, the device returns t… --- ## [How to apply changes to dey-digi-qt image, where i can find the bb files of dey-image-qt](https://forums.digi.com/t/how-to-apply-changes-to-dey-digi-qt-image-where-i-can-find-the-bb-files-of-dey-image-qt/37114)
**Author:** [@Elias](https://forums.digi.com/u/Elias)\ **Replies:** 5\ **Last updated:** [June 12, 2025, 11:46am UTC](https://forums.digi.com/t/how-to-apply-changes-to-dey-digi-qt-image-where-i-can-find-the-bb-files-of-dey-image-qt/37114 "2025-06-12T11:46:11Z")
I dont find the dey-image-qt recipe to apply my changes for my custom board. can anyone help ? also the corresponding \*.bb files are not in the workspace. --- ## [Factory reset my SOM CCIMX8MN](https://forums.digi.com/t/factory-reset-my-som-ccimx8mn/36980)
**Author:** [@Elias](https://forums.digi.com/u/Elias)\ **Replies:** 1\ **Last updated:** [June 12, 2025, 11:44am UTC](https://forums.digi.com/t/factory-reset-my-som-ccimx8mn/36980 "2025-06-12T11:44:39Z")
My CCIMX8MN SOM doesnt boot proprely. is the file imx-boot-ccimx8mn-dvk\_rescue\_boot.bin-flash\_evk given in digi homepage the right one for factory reset the SOM ccimx8mn ? Can someone tell me the difference between … --- ## [Xbee pro s3b programmable modules do not communi̇cate](https://forums.digi.com/t/xbee-pro-s3b-programmable-modules-do-not-communi-cate/36922)
**Author:** [@Mesad55](https://forums.digi.com/u/Mesad55)\ **Replies:** 16\ **Last updated:** [May 29, 2025, 2:35pm UTC](https://forums.digi.com/t/xbee-pro-s3b-programmable-modules-do-not-communi-cate/36922 "2025-05-29T14:35:43Z")
Hi everyone, I’ve bought xbee pro 900 hp dmst-b002 by mistake (I did not know b stands for programmable), however I dont have the opportunity to change it for now. So I uploaded a serial bypass code via code warrior and … --- ## [Function : xxxx not found in xctu](https://forums.digi.com/t/function-xxxx-not-found-in-xctu/36949)
**Author:** [@Mesad55](https://forums.digi.com/u/Mesad55)\ **Replies:** 1\ **Last updated:** [May 25, 2025, 10:07pm UTC](https://forums.digi.com/t/function-xxxx-not-found-in-xctu/36949 "2025-05-25T22:07:18Z")
Hi everyone , I have non programmable xbee pro s3b module. When I discovered it from xctu, there is no firmware inside of it, when I try to upload a firmware form internet, it gives me error which indicates that it could… --- ## [EX15W internet connection over WIFI Setup](https://forums.digi.com/t/ex15w-internet-connection-over-wifi-setup/34018)
**Author:** [@Tam](https://forums.digi.com/u/Tam)\ **Replies:** 5\ **Last updated:** [March 25, 2025, 6:27pm UTC](https://forums.digi.com/t/ex15w-internet-connection-over-wifi-setup/34018 "2025-03-25T18:27:49Z")
We have EX15W model and also WR54 WR64, the question is regarding EX15W, by default it appears to connect to the web using a wired ethernet but upon connecting using Wi-Fi it does not connect to the web. From the documen… --- ## [New Haven Display NHD-5.0-800480TF-ATXL# With Connect Core 6 Running Android Oreo is Dim and Off-Center](https://forums.digi.com/t/new-haven-display-nhd-5-0-800480tf-atxl-with-connect-core-6-running-android-oreo-is-dim-and-off-center/34271)
**Author:** [@jsculley](https://forums.digi.com/u/jsculley)\ **Replies:** 0\ **Last updated:** [January 31, 2025, 2:54pm UTC](https://forums.digi.com/t/new-haven-display-nhd-5-0-800480tf-atxl-with-connect-core-6-running-android-oreo-is-dim-and-off-center/34271 "2025-01-31T14:54:43Z")
As stated, the display is dim and off center. Same screen works fine with our previous non-Digi SBC, so I assume there is a setup issue. Do I need to make adjustments to the device tree? If so, are there instructions o… --- ## ["Error message" when trying to change Authentification idle time](https://forums.digi.com/t/error-message-when-trying-to-change-authentification-idle-time/32914)
**Author:** [@Emmanuel](https://forums.digi.com/u/Emmanuel)\ **Replies:** 1\ **Last updated:** [October 24, 2024, 10:04pm UTC](https://forums.digi.com/t/error-message-when-trying-to-change-authentification-idle-time/32914 "2024-10-24T22:04:45Z")
I encountering some error message everytime when i trying to change the autentification idle time also that i can’t able to log for a while. i really like to find a solution for this case so could you please help me in … --- ## [DHT11 and DS18B20 One wire Temp. Sensors With Xbee 3?](https://forums.digi.com/t/dht11-and-ds18b20-one-wire-temp-sensors-with-xbee-3/32666)
**Author:** [@Mrk](https://forums.digi.com/u/Mrk)\ **Replies:** 1\ **Last updated:** [October 2, 2024, 3:51pm UTC](https://forums.digi.com/t/dht11-and-ds18b20-one-wire-temp-sensors-with-xbee-3/32666 "2024-10-02T15:51:25Z")
I bought the XBee3 ZigBee Mesh kit /SMT Grove Board to send Temperature data collected by an Arduino , to a display, driven by a Raspberry Pi. It will replace a TP LInk wifi repeater that no longer sends data due to wifi… --- ## [CC-MX-MB69-ZK Processor Part Number](https://forums.digi.com/t/cc-mx-mb69-zk-processor-part-number/29223)
**Author:** [@tarun172](https://forums.digi.com/u/tarun172)\ **Replies:** 3\ **Last updated:** [September 24, 2024, 4:00pm UTC](https://forums.digi.com/t/cc-mx-mb69-zk-processor-part-number/29223 "2024-09-24T16:00:10Z")
Is anyone aware of the actual processor part number used in the CC-MX-MB69-ZK module? Thanks, Tarun S --- ## [Want to register Anywhere USB in Digi support portal](https://forums.digi.com/t/want-to-register-anywhere-usb-in-digi-support-portal/32576)
**Author:** [@doexee](https://forums.digi.com/u/doexee)\ **Replies:** 1\ **Last updated:** [September 20, 2024, 12:46pm UTC](https://forums.digi.com/t/want-to-register-anywhere-usb-in-digi-support-portal/32576 "2024-09-20T12:46:58Z")
I have an AnywhereUSB 24 Plus device that I’m trying to register on the Digi support portal. The device dashboard shows a SKU of 50001982-02, but this isn’t accepted on the registration page. Could someone provide me wit… --- ## [Inrush current Problems Xbee 3](https://forums.digi.com/t/inrush-current-problems-xbee-3/32466)
**Author:** [@jorgie](https://forums.digi.com/u/jorgie)\ **Replies:** 1\ **Last updated:** [September 10, 2024, 11:44am UTC](https://forums.digi.com/t/inrush-current-problems-xbee-3/32466 "2024-09-10T11:44:30Z")
Hi, I have my own STM32 development board that I am interfacing to an Xbee 3. I have chosen to delay switching the Xbee3s power supply on until I need to use the transceiver. However, when I do switch the Xbee3 on I an… --- ## [Connectport X2 realport connection recovery](https://forums.digi.com/t/connectport-x2-realport-connection-recovery/31753)
**Author:** [@BrettMargo](https://forums.digi.com/u/BrettMargo)\ **Replies:** 6\ **Last updated:** [July 16, 2024, 3:15pm UTC](https://forums.digi.com/t/connectport-x2-realport-connection-recovery/31753 "2024-07-16T15:15:24Z")
Hi, I have several Connectport X2s connected to a remote server as emulated com ports using the realport system. While configuring them remotely the other day I mistakenly changed the Ethernet IP settings from our defin… --- ## [Constant Framing Errors during RS-232 Read on PortServer TS4](https://forums.digi.com/t/constant-framing-errors-during-rs-232-read-on-portserver-ts4/31756)
**Author:** [@Bobtheman155](https://forums.digi.com/u/Bobtheman155)\ **Replies:** 2\ **Last updated:** [July 22, 2024, 5:36pm UTC](https://forums.digi.com/t/constant-framing-errors-during-rs-232-read-on-portserver-ts4/31756 "2024-07-22T17:36:07Z")
Hello All, Problem: I am having issues reading the correct data with my PortServer Ts, I am getting constant Framing Issues on the Digi PortServer while trying to read data from another Rs232 device while in TCP Socket… --- ## [DIGI WR11 losing LAN connection after a number of hours](https://forums.digi.com/t/digi-wr11-losing-lan-connection-after-a-number-of-hours/30736)
**Author:** [@Phillips](https://forums.digi.com/u/Phillips)\ **Replies:** 1\ **Last updated:** [June 18, 2024, 6:38pm UTC](https://forums.digi.com/t/digi-wr11-losing-lan-connection-after-a-number-of-hours/30736 "2024-06-18T18:38:12Z")
Hi All I’ve got a WR11 that I’ve set up cellular and a LAN DHCP server on Eth 0. The DHCP server is assigning addresses to the devices on my network but no traffic is passing through to the internet. I can configure the… --- ## [Firmware update without FTP](https://forums.digi.com/t/firmware-update-without-ftp/31389)
**Author:** [@haribofan](https://forums.digi.com/u/haribofan)\ **Replies:** 1\ **Last updated:** [June 18, 2024, 7:29am UTC](https://forums.digi.com/t/firmware-update-without-ftp/31389 "2024-06-18T07:29:02Z")
Hello, How can I do a firmware update on a ME9210 without FTP. I uploaded a firmware without activating the FTP server. Thanks [Next page](https://forums.digi.com/tag/hardware/7.md?match_all_tags=true&page=1&tags%5B%5D=hardware)