# \#i **URL:** https://forums.digi.com/tag/i/278.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [I/O Line Passing](https://forums.digi.com/t/i-o-line-passing/22892)
**Author:** [@Steve\_Digital](https://forums.digi.com/u/Steve_Digital)\ **Replies:** 2\ **Last updated:** [February 10, 2022, 12:22pm UTC](https://forums.digi.com/t/i-o-line-passing/22892 "2022-02-10T12:22:27Z")
I am using 3 x XB3-24, I have 1 programmed as a coordinator(my receiver) this will control 4 i/ps to an Arduino. I have the first Xbee programmed as End Device ( my transmitter) to Use D0 & D1 they toggle O/P D0 & D1 on… --- ## [How do I set up TLB in MMU on 9p9215 for memory mapped I/O?](https://forums.digi.com/t/how-do-i-set-up-tlb-in-mmu-on-9p9215-for-memory-mapped-i-o/22290)
**Author:** [@cjwilde](https://forums.digi.com/u/cjwilde)\ **Replies:** 1\ **Last updated:** [March 23, 2021, 10:18pm UTC](https://forums.digi.com/t/how-do-i-set-up-tlb-in-mmu-on-9p9215-for-memory-mapped-i-o/22290 "2021-03-23T22:18:58Z")
I’m porting an application from a 7u 7520 module to a 9p 9215 module. It uses memory mapped I/O to access an FPGA. There’s no MMU on the 7u, so as part of the port I need to add code to set up the MMU. I customized th… --- ## [ConnectCore6 DEY missing libgomp getent systemctl](https://forums.digi.com/t/connectcore6-dey-missing-libgomp-getent-systemctl/22028)
**Author:** [@jinbae9875](https://forums.digi.com/u/jinbae9875)\ **Replies:** 1\ **Last updated:** [December 2, 2020, 9:20pm UTC](https://forums.digi.com/t/connectcore6-dey-missing-libgomp-getent-systemctl/22028 "2020-12-02T21:20:35Z")
Hi. I flashed the Digi Embedded Yocto on my ConnectCore6 SBC and I’m trying to install and run a program but it looks like the image is missing the following: getent, libgomp, systemctl. So I’ve tried to include them by … --- ## [QNX BSP support for ConnectCore 8X SOM](https://forums.digi.com/t/qnx-bsp-support-for-connectcore-8x-som/20882)
**Author:** [@dbugbee](https://forums.digi.com/u/dbugbee)\ **Replies:** 1\ **Last updated:** [November 10, 2019, 4:56pm UTC](https://forums.digi.com/t/qnx-bsp-support-for-connectcore-8x-som/20882 "2019-11-10T16:56:41Z")
We’d like to use QNX 7.x on the new ConnectCore 8X SOM. Digi only specifically states that it supports Linux and Android for this SOM. But NXP, the maker of the i.MX 8X chip, which is on the ConnectCore 8X SOM, states … --- ## [how to add package to yocto image for i.MX6UL](https://forums.digi.com/t/how-to-add-package-to-yocto-image-for-i-mx6ul/20129)
**Author:** [@Don\_Osmond](https://forums.digi.com/u/Don_Osmond)\ **Replies:** 1\ **Last updated:** [January 3, 2019, 5:04am UTC](https://forums.digi.com/t/how-to-add-package-to-yocto-image-for-i-mx6ul/20129 "2019-01-03T05:04:55Z")
I need to add iptables to the yocto image that we have for the i.MX6UL. Does anyone have a set of steps they can share to build the new image? --- ## [An application run with Segmentation fault error message on i.MX6 SBC](https://forums.digi.com/t/an-application-run-with-segmentation-fault-error-message-on-i-mx6-sbc/17200)
**Author:** [@klugattila](https://forums.digi.com/u/klugattila)\ **Replies:** 2\ **Last updated:** [August 8, 2016, 8:11am UTC](https://forums.digi.com/t/an-application-run-with-segmentation-fault-error-message-on-i-mx6-sbc/17200 "2016-08-08T08:11:55Z")
Hello, I try run the application on CC6 board (i.MX6 SBC Development Board). It is no run beacuse the message show: “Segmentation fault (core dumped)” I make the application with Qt5 software. The application is com… --- ## [i.MX53 pin setup 3.3V](https://forums.digi.com/t/i-mx53-pin-setup-3-3v/17112)
**Author:** [@lambrio](https://forums.digi.com/u/lambrio)\ **Replies:** 0\ **Last updated:** [July 20, 2016, 10:06am UTC](https://forums.digi.com/t/i-mx53-pin-setup-3-3v/17112 "2016-07-20T10:06:36Z")
Hello, on the ConnectCore® i.MX53 / Wi-i.MX53 it’s possible to setup I2C, UART, SPI, GPIO, everythigs to work with 3.3V power sypply level ? Best regards, Oscar --- ## [without debugger how can i upload or load code in programmable Xbee module?](https://forums.digi.com/t/without-debugger-how-can-i-upload-or-load-code-in-programmable-xbee-module/13651)
**Author:** [@Dhruval](https://forums.digi.com/u/Dhruval)\ **Replies:** 6\ **Last updated:** [January 9, 2016, 10:21am UTC](https://forums.digi.com/t/without-debugger-how-can-i-upload-or-load-code-in-programmable-xbee-module/13651 "2016-01-09T10:21:53Z")
--- ## [i.mx28 no wlan0](https://forums.digi.com/t/i-mx28-no-wlan0/15588)
**Author:** [@Curby](https://forums.digi.com/u/Curby)\ **Replies:** 2\ **Last updated:** [October 19, 2015, 11:21am UTC](https://forums.digi.com/t/i-mx28-no-wlan0/15588 "2015-10-19T11:21:10Z")
Hi there, i use the i.mx28 with Wifi and created my own Linux Setup with the Digi Embedded Linux. But typing ifconfig there is no wlan0 device. I selected all drivers AND or only default Wireless Lan IEEE.802.11 but … --- ## [Is Xbee WiFi S6B compatible with Xbee WiFi S6 for receiving I/O sampling?](https://forums.digi.com/t/is-xbee-wifi-s6b-compatible-with-xbee-wifi-s6-for-receiving-i-o-sampling/14950)
**Author:** [@jcalderon](https://forums.digi.com/u/jcalderon)\ **Replies:** 1\ **Last updated:** [September 4, 2015, 10:19am UTC](https://forums.digi.com/t/is-xbee-wifi-s6b-compatible-with-xbee-wifi-s6-for-receiving-i-o-sampling/14950 "2015-09-04T10:19:50Z")
I’m sending I/O samples from Xbee WiFi S6 to Xbee WiFi S6B. S6B is configured in API mode, however S6B is not receiving the I/O samples. If I send serial data from S6 to S6B, data is received correctly in an API frame, b… --- ## [ConnectCore for i.MX28 3D Model files Keepout](https://forums.digi.com/t/connectcore-for-i-mx28-3d-model-files-keepout/15323)
**Author:** [@aje3892](https://forums.digi.com/u/aje3892)\ **Replies:** 1\ **Last updated:** [August 31, 2015, 10:23am UTC](https://forums.digi.com/t/connectcore-for-i-mx28-3d-model-files-keepout/15323 "2015-08-31T10:23:46Z")
How much overhead is there in the 3D model files recommended keep out for the ConnectCore for i.MX28? We are hoping to integrate a CC-WMX-PE47-JT into our design. We do not have the height required within our enclosure… --- ## [can we run baremetal i.e no-os drivers on i.mx53QSB board?](https://forums.digi.com/t/can-we-run-baremetal-i-e-no-os-drivers-on-i-mx53qsb-board/14734)
**Author:** [@ravigp](https://forums.digi.com/u/ravigp)\ **Replies:** 1\ **Last updated:** [April 21, 2015, 8:45pm UTC](https://forums.digi.com/t/can-we-run-baremetal-i-e-no-os-drivers-on-i-mx53qsb-board/14734 "2015-04-21T20:45:52Z")
--- ## [I.MX53 WCE 7, how to change digi.gif and default.htm in OS compiling](https://forums.digi.com/t/i-mx53-wce-7-how-to-change-digi-gif-and-default-htm-in-os-compiling/14395)
**Author:** [@handersen](https://forums.digi.com/u/handersen)\ **Replies:** 1\ **Last updated:** [February 24, 2015, 9:50am UTC](https://forums.digi.com/t/i-mx53-wce-7-how-to-change-digi-gif-and-default-htm-in-os-compiling/14395 "2015-02-24T09:50:52Z")
I want to change the standard webserver picture and link (digi.gif and link to www.digiembedded.com), and insert our own picture and link. When I compile the OS, the new picture and link should then be active. Best reg… --- ## [How to use a XBEE modem in an intrinisically safe product?](https://forums.digi.com/t/how-to-use-a-xbee-modem-in-an-intrinisically-safe-product/13838)
**Author:** [@obavar](https://forums.digi.com/u/obavar)\ **Replies:** 1\ **Last updated:** [October 31, 2014, 10:44am UTC](https://forums.digi.com/t/how-to-use-a-xbee-modem-in-an-intrinisically-safe-product/13838 "2014-10-31T10:44:17Z")
We are developing an Intrinsically Safe wireless device and are using the XBEE-PRO 900HB module. How can we protect the module so it can pass the I.S. approval? --- ## [Modifying DO through API frame](https://forums.digi.com/t/modifying-do-through-api-frame/13794)
**Author:** [@progloverfan](https://forums.digi.com/u/progloverfan)\ **Replies:** 3\ **Last updated:** [October 25, 2014, 11:48am UTC](https://forums.digi.com/t/modifying-do-through-api-frame/13794 "2014-10-25T11:48:05Z")
Hi. Is it possible to send a packet to a remote Xbee to modify the behavior of a DO pin? I read about I/O Line passing but the base Xbee is encapsulated and is impossible to modify the DI input, so I want to send a pack… --- ## [Custom PCB for Wi-i.MX53](https://forums.digi.com/t/custom-pcb-for-wi-i-mx53/13534)
**Author:** [@slm](https://forums.digi.com/u/slm)\ **Replies:** 1\ **Last updated:** [September 2, 2014, 7:24pm UTC](https://forums.digi.com/t/custom-pcb-for-wi-i-mx53/13534 "2014-09-02T19:24:19Z")
I am working on a project where I am designing a custom PCB for the Wi-i.MX53 module, and am having issues getting the module to boot. I have so far copied the boot selection logic circuit, and the power on circuit. But … --- ## [WCE and i.MX53, install WCE on a new module](https://forums.digi.com/t/wce-and-i-mx53-install-wce-on-a-new-module/13521)
**Author:** [@handersen](https://forums.digi.com/u/handersen)\ **Replies:** 1\ **Last updated:** [August 28, 2014, 2:43am UTC](https://forums.digi.com/t/wce-and-i-mx53-install-wce-on-a-new-module/13521 "2014-08-28T02:43:19Z")
What is the procedure to install WCE on brand new i.MX53 modules? I have the the “ConnectCore for i.MX53 JumpStart Kit for Microsoft Windows Embedded Compact 7” where I have access to the serial terminal and the SD card… --- ## [can i use a xbee coordinator](https://forums.digi.com/t/can-i-use-a-xbee-coordinator/13341)
**Author:** [@rajeshreddy](https://forums.digi.com/u/rajeshreddy)\ **Replies:** 2\ **Last updated:** [August 26, 2014, 10:49am UTC](https://forums.digi.com/t/can-i-use-a-xbee-coordinator/13341 "2014-08-26T10:49:16Z")
--- ## [Difference between slave ports and auxilliary I/O bus?](https://forums.digi.com/t/difference-between-slave-ports-and-auxilliary-i-o-bus/12204)
**Author:** [@AISWARYA\_RAJ](https://forums.digi.com/u/AISWARYA_RAJ)\ **Replies:** 1\ **Last updated:** [January 20, 2014, 11:11am UTC](https://forums.digi.com/t/difference-between-slave-ports-and-auxilliary-i-o-bus/12204 "2014-01-20T11:11:42Z")
--- ## [Input/output Documentation for Transport WR44](https://forums.digi.com/t/input-output-documentation-for-transport-wr44/11834)
**Author:** [@Sitech](https://forums.digi.com/u/Sitech)\ **Replies:** 1\ **Last updated:** [September 16, 2013, 4:14am UTC](https://forums.digi.com/t/input-output-documentation-for-transport-wr44/11834 "2013-09-16T04:14:36Z")
Hi. Im new with this product Transport WR44. Where can I find some Documentation to program the internal I/O Place in the AUX Converter? Hope to receive some input soon. --- ## [LxNetes - Peripheral Interface](https://forums.digi.com/t/lxnetes-peripheral-interface/4980)
**Author:** [@brents](https://forums.digi.com/u/brents)\ **Replies:** 0\ **Last updated:** [April 6, 2009, 3:13pm UTC](https://forums.digi.com/t/lxnetes-peripheral-interface/4980 "2009-04-06T15:13:41Z")
Does anyone have an example of interfacing external I/O on LxNetes using CS3 or CS4?