# \#ikev2 **URL:** https://forums.digi.com/tag/ikev2/4462.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Issue when trying to configure several TransPort peers using IKEv2 VPN Tunnel to a Cisco Responder](https://forums.digi.com/t/issue-when-trying-to-configure-several-transport-peers-using-ikev2-vpn-tunnel-to-a-cisco-responder/22586)
**Author:** [@Felipe1987](https://forums.digi.com/u/Felipe1987)\ **Replies:** 0\ **Last updated:** [August 5, 2021, 1:03pm UTC](https://forums.digi.com/t/issue-when-trying-to-configure-several-transport-peers-using-ikev2-vpn-tunnel-to-a-cisco-responder/22586 "2021-08-05T13:03:26Z")
Hi all, We followed the Application Note 58 to establish an IKEv2 VPN Tunnel Between a TransPort router WR44 and a Cisco Responder. It worked well when using only one peer, but if we configure another TransPort router W… --- ## [IKEV2 event log\[SOLVED\]](https://forums.digi.com/t/ikev2-event-log-solved/21880)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 3\ **Last updated:** [November 20, 2020, 6:22am UTC](https://forums.digi.com/t/ikev2-event-log-solved/21880 "2020-11-20T06:22:46Z")
Hi Guys: I’ve gotten IKEV2 running between a WR21 and a Cisco using asymmetric pre-shared-keys but the Digi event log is filling up with this kind of stuff: 19:23:23, 09 Oct 2020,(508) IKEv2 Negotiation completed pe,Re… --- ## [ikev2 status from CLI](https://forums.digi.com/t/ikev2-status-from-cli/21889)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 1\ **Last updated:** [November 19, 2020, 3:23am UTC](https://forums.digi.com/t/ikev2-status-from-cli/21889 "2020-11-19T03:23:16Z")
CLI commands: I have a Digi that is using IKEV2 and I want to check the IKEV2 SAs, I get this: CORS15\>ikestat No IKE SAs OK This works fine: CORS15\>sastat IPsec SAs (total:1). Eroute 0 -\> 4 Outbound V1 SAs List … --- ## [IKEV2 to Cisco rekeying every 11 seconds\[SOLVED\]](https://forums.digi.com/t/ikev2-to-cisco-rekeying-every-11-seconds-solved/21893)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 4\ **Last updated:** [November 19, 2020, 3:18am UTC](https://forums.digi.com/t/ikev2-to-cisco-rekeying-every-11-seconds-solved/21893 "2020-11-19T03:18:50Z")
Hi All: I am terminating IKEV2 IPSec tunnels with a Cisco ISR4431 and WR21 routers. The is the WR21 eventlog: 12:38:44, 15 Oct 2020,(7) New IKEv2 Negotiation peer 103.205.244.106,Responder (Info) 12:38:33, 15 Oct 202… --- ## [ikev2 rekey intervals\[SOLVED\]](https://forums.digi.com/t/ikev2-rekey-intervals-solved/21928)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 1\ **Last updated:** [November 3, 2020, 9:50am UTC](https://forums.digi.com/t/ikev2-rekey-intervals-solved/21928 "2020-11-03T09:50:06Z")
Hi All: In the Digi transports, the IKEv2 setup there these two entries: Renegotiate after  hrs  mins  secs Rekey after  hrs  mins  secs Which one should be the bigger of the two? Renegotiate to me means the e… --- ## [IKEv2, WR21 to Cisco IOS \[SOLVED\]](https://forums.digi.com/t/ikev2-wr21-to-cisco-ios-solved/21892)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 2\ **Last updated:** [October 20, 2020, 1:03am UTC](https://forums.digi.com/t/ikev2-wr21-to-cisco-ios-solved/21892 "2020-10-20T01:03:13Z")
Hello: I have a strange problem that I am only seeing in India. I have not been able to duplicate this behavior in Singapore, however; in India it occurs with all the cell phone providers: At the Digi WR21 initiator en… --- ## [AN\_58-Question\[SOLVED\]](https://forums.digi.com/t/an-58-question-solved/21771)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 1\ **Last updated:** [October 15, 2020, 9:22am UTC](https://forums.digi.com/t/an-58-question-solved/21771 "2020-10-15T09:22:31Z")
Hi All: Question regarding AN\_58. The Cisco section shows only a single entry under: crypto ikev2 kering kyr1 peer transport identity key-id transport pre-shared-key digidigi ! Since there is no “ikev2 remote-aut…