# \#imx28 **URL:** https://forums.digi.com/tag/imx28/1581.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [ConnectCard imx28 python3](https://forums.digi.com/t/connectcard-imx28-python3/22194)
**Author:** [@jfmonaco](https://forums.digi.com/u/jfmonaco)\ **Replies:** 2\ **Last updated:** [February 9, 2021, 6:59am UTC](https://forums.digi.com/t/connectcard-imx28-python3/22194 "2021-02-09T06:59:13Z")
SYNOPSIS: A device based on the ConnectCard iMX28 requires updates to installed images created via Digi Embedded Yocto to include Python3 support. Based on a literature review, the Digi support for this platform via the… --- ## [How to compile for imx28 on a 64bits machine ?](https://forums.digi.com/t/how-to-compile-for-imx28-on-a-64bits-machine/22122)
**Author:** [@vitirover](https://forums.digi.com/u/vitirover)\ **Replies:** 1\ **Last updated:** [January 14, 2021, 3:29pm UTC](https://forums.digi.com/t/how-to-compile-for-imx28-on-a-64bits-machine/22122 "2021-01-14T15:29:06Z")
Hello, We are making the move from the imx28 card to the connect core 6ul card. We currently have two virtual machines with linux distributions : a recent 64 bits Ubuntu for Yocto / eclipse for imx6ul, and an old 32 bit… --- ## [Disable pullups on ConnectCard i.mx28 for GPIO use](https://forums.digi.com/t/disable-pullups-on-connectcard-i-mx28-for-gpio-use/16967)
**Author:** [@thayward](https://forums.digi.com/u/thayward)\ **Replies:** 5\ **Last updated:** [June 22, 2016, 5:00pm UTC](https://forums.digi.com/t/disable-pullups-on-connectcard-i-mx28-for-gpio-use/16967 "2016-06-22T17:00:34Z")
My goal is to use ConnectCard i.mx28 pins 18, 20, 22, 24, and 26 (SSP0\_CMD, SSP0\_DATA0, SSP0\_DATA1, SSP0\_DATA2, and SSP0\_DATA3, respectively) for GPIO. My problem is that the pins seem to have an internal pullup I just c… --- ## [ConnectCard i.mx28 GPIOs as outputs](https://forums.digi.com/t/connectcard-i-mx28-gpios-as-outputs/16674)
**Author:** [@jfmonaco](https://forums.digi.com/u/jfmonaco)\ **Replies:** 1\ **Last updated:** [April 28, 2016, 6:15pm UTC](https://forums.digi.com/t/connectcard-i-mx28-gpios-as-outputs/16674 "2016-04-28T18:15:26Z")
Hello, I would like to use two GPIOs on a custom board that includes the Digi ConnectCard i.mx28 module; an output associated with pin 27 of the module and an input associated with pin 29 of the module. From the Digi ha… --- ## [How could i use android phone connected by USB to imx28 to get Ineternet link ?](https://forums.digi.com/t/how-could-i-use-android-phone-connected-by-usb-to-imx28-to-get-ineternet-link/16252)
**Author:** [@xavierdb](https://forums.digi.com/u/xavierdb)\ **Replies:** 2\ **Last updated:** [February 11, 2016, 1:51pm UTC](https://forums.digi.com/t/how-could-i-use-android-phone-connected-by-usb-to-imx28-to-get-ineternet-link/16252 "2016-02-11T13:51:07Z")
I have launch “modprobe g\_ether” –\> OK. Now usb0 appears in “ifconfig”. I give IPAddress/netmask “192.168.42.206/255.255.255.0” –\> OK I launch “udhcpd usb0” with good addresses in “udhcpd.conf”. I Add “route add defa… --- ## [UBIFS root filesystem flash update on ccardimx28js](https://forums.digi.com/t/ubifs-root-filesystem-flash-update-on-ccardimx28js/15502)
**Author:** [@jfmonaco](https://forums.digi.com/u/jfmonaco)\ **Replies:** 2\ **Last updated:** [October 15, 2015, 10:28am UTC](https://forums.digi.com/t/ubifs-root-filesystem-flash-update-on-ccardimx28js/15502 "2015-10-15T10:28:55Z")
Hi all, I am using Yocto to create images for a ConnectCard Jump Start reference board (ccardimx28js). An issue arises when I attempt to update a secondary rootfs partition within Linux from the primary partition using … --- ## [Update UBIFS root filesystem via update\_flash tool](https://forums.digi.com/t/update-ubifs-root-filesystem-via-update-flash-tool/15486)
**Author:** [@jfmonaco](https://forums.digi.com/u/jfmonaco)\ **Replies:** 3\ **Last updated:** [October 1, 2015, 12:11pm UTC](https://forums.digi.com/t/update-ubifs-root-filesystem-via-update-flash-tool/15486 "2015-10-01T12:11:44Z")
Hi all, I have a UBIFS root file system using an image created via Yocto recipes with the Digi Embedded Yocto minimal (non-graphical) build as a starting point. As part of a firmware update procedure, I’d like to be ab… --- ## [How to create a good wiimx28 uboot file ? I loose my eth0 link and "mii dump" gives me a all "1" config ?](https://forums.digi.com/t/how-to-create-a-good-wiimx28-uboot-file-i-loose-my-eth0-link-and-mii-dump-gives-me-a-all-1-config/14851)
**Author:** [@xavierdb](https://forums.digi.com/u/xavierdb)\ **Replies:** 1\ **Last updated:** [May 18, 2015, 11:04am UTC](https://forums.digi.com/t/how-to-create-a-good-wiimx28-uboot-file-i-loose-my-eth0-link-and-mii-dump-gives-me-a-all-1-config/14851 "2015-05-18T11:04:40Z")
Up to a few days, i used too. Something should change in my kconfig. --- ## [USB hotplug problem on iMX28](https://forums.digi.com/t/usb-hotplug-problem-on-imx28/14087)
**Author:** [@sbrizard\_scheiber](https://forums.digi.com/u/sbrizard_scheiber)\ **Replies:** 2\ **Last updated:** [January 29, 2015, 4:15am UTC](https://forums.digi.com/t/usb-hotplug-problem-on-imx28/14087 "2015-01-29T04:15:11Z")
Hello, We are facing some problems when we “hotplug” USB devices on the JumpStart kit for the ConnectCard Wi-i.MX28. When one USB device is connected at startup, everything works great : The USB device is correctly dete… --- ## [IMX28 problem permanently bridging eth0 and eth1](https://forums.digi.com/t/imx28-problem-permanently-bridging-eth0-and-eth1/13478)
**Author:** [@neilh](https://forums.digi.com/u/neilh)\ **Replies:** 1\ **Last updated:** [August 26, 2014, 12:35pm UTC](https://forums.digi.com/t/imx28-problem-permanently-bridging-eth0-and-eth1/13478 "2014-08-26T12:35:37Z")
Using the example provided in the application note Network Bridging in the Digi Embedded Linux Command Line Reference Manual, I am able to successfully bridge 2 network segments. Problem: when one of the cables is disco…