# \#kit **URL:** https://forums.digi.com/tag/kit/587.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Packets in Digi Cloud Kit](https://forums.digi.com/t/packets-in-digi-cloud-kit/22919)
**Author:** [@Martin91](https://forums.digi.com/u/Martin91)\ **Replies:** 7\ **Last updated:** [February 11, 2022, 9:48am UTC](https://forums.digi.com/t/packets-in-digi-cloud-kit/22919 "2022-02-11T09:48:08Z")
Hi, where i can find info for data number/size packets of the Gateway from the cloud kit ? --- ## [Cannot discover network nodes without antenna](https://forums.digi.com/t/cannot-discover-network-nodes-without-antenna/22817)
**Author:** [@CL2021](https://forums.digi.com/u/CL2021)\ **Replies:** 2\ **Last updated:** [December 8, 2021, 10:21am UTC](https://forums.digi.com/t/cannot-discover-network-nodes-without-antenna/22817 "2021-12-08T10:21:46Z")
I’m testing the Digi XBee3 Zigbee Mesh Kit with XCTU. Once configured the XBee3 the way it mentioned in the Mesh Kit User Guide, I could only discover radio nodes with the antenna attached. And if without the antenna a… --- ## [I am using the xbee pro 900hp mesh kit, and using for remote building monitoring](https://forums.digi.com/t/i-am-using-the-xbee-pro-900hp-mesh-kit-and-using-for-remote-building-monitoring/22792)
**Author:** [@Steve\_Digital](https://forums.digi.com/u/Steve_Digital)\ **Replies:** 1\ **Last updated:** [November 19, 2021, 2:20pm UTC](https://forums.digi.com/t/i-am-using-the-xbee-pro-900hp-mesh-kit-and-using-for-remote-building-monitoring/22792 "2021-11-19T14:20:46Z")
i need a simple network, i have 3 buildings, 1- would be the receiver for the other 2 Xbees, relay contacts close on fault, transmit back to building one. this Xbee is receiver and will provide o/p to cellular modem. i … --- ## [Why do XBee-PRO SX development boards need to be separated by 2m?](https://forums.digi.com/t/why-do-xbee-pro-sx-development-boards-need-to-be-separated-by-2m/22654)
**Author:** [@fpablo](https://forums.digi.com/u/fpablo)\ **Replies:** 4\ **Last updated:** [September 14, 2021, 11:00am UTC](https://forums.digi.com/t/why-do-xbee-pro-sx-development-boards-need-to-be-separated-by-2m/22654 "2021-09-14T11:00:37Z")
I have just received a “Digi XBee SX RF Module Dev Kit” and reading the User Guide it says “Connect the SX development boards to the USB port on a PC via the mini-USB cables. Separate the SX development boards by at leas… --- ## [Digi cloud kit and FreeBoard.io](https://forums.digi.com/t/digi-cloud-kit-and-freeboard-io/22054)
**Author:** [@Martin91](https://forums.digi.com/u/Martin91)\ **Replies:** 0\ **Last updated:** [December 13, 2020, 6:15am UTC](https://forums.digi.com/t/digi-cloud-kit-and-freeboard-io/22054 "2020-12-13T06:15:08Z")
Hi, i use Digi cloud kit and i want to upload sensor data from this platform (https://xbeegateway.herokuapp.com/#/login) to the FreeBoard.io. I’ve noticed that in digi remote manager- event log i receive messages with ur… --- ## [Digi Cloud Kit Measurements](https://forums.digi.com/t/digi-cloud-kit-measurements/22007)
**Author:** [@Martin91](https://forums.digi.com/u/Martin91)\ **Replies:** 5\ **Last updated:** [November 30, 2020, 12:54pm UTC](https://forums.digi.com/t/digi-cloud-kit-measurements/22007 "2020-11-30T12:54:09Z")
Hi, i use The Cloud Kit, and i succeed to run the kit and to connect the web app for the kit and to create some ‘‘Widgets’’ like temperature for example. And now i was trying to use my Wall router, to measure the temp\\li… --- ## [Digi Cloud Kit Problem](https://forums.digi.com/t/digi-cloud-kit-problem/21995)
**Author:** [@Martin91](https://forums.digi.com/u/Martin91)\ **Replies:** 4\ **Last updated:** [November 20, 2020, 8:36am UTC](https://forums.digi.com/t/digi-cloud-kit-problem/21995 "2020-11-20T08:36:00Z")
Hi, i’ve got The Cloud kit (https://www.digi.com/resources/documentation/digidocs/pdfs/90001503.pdf), and firstly i was able to connect the Gateway to the WIFI network and to enter in the gateway menu and to make the con… --- ## [Does ME 9210 jumpstart kit support connect ME?](https://forums.digi.com/t/does-me-9210-jumpstart-kit-support-connect-me/21241)
**Author:** [@phy123](https://forums.digi.com/u/phy123)\ **Replies:** 4\ **Last updated:** [April 6, 2020, 8:16am UTC](https://forums.digi.com/t/does-me-9210-jumpstart-kit-support-connect-me/21241 "2020-04-06T08:16:10Z")
Hi, I’m wondering if Connect ME 9210 Jumpstart kit (P/N DC-ME-9210-NET) supports Connect ME (P/N DC-ME-01T-C)? Regards Petri --- ## [Is it possible to change the data rate of the “Digi XBee-PRO 900HP DigiMesh Kit” by software?](https://forums.digi.com/t/is-it-possible-to-change-the-data-rate-of-the-digi-xbee-pro-900hp-digimesh-kit-by-software/21076)
**Author:** [@david\_r\_004](https://forums.digi.com/u/david_r_004)\ **Replies:** 1\ **Last updated:** [January 29, 2020, 3:23pm UTC](https://forums.digi.com/t/is-it-possible-to-change-the-data-rate-of-the-digi-xbee-pro-900hp-digimesh-kit-by-software/21076 "2020-01-29T15:23:53Z")
Is it possible to change the data rate of the “Digi XBee-PRO 900HP DigiMesh Kit” by software? I know on the datasheet it says 10kbps or 200kbps but is their different devices for 10kbps or 200kbps, if so does the DigiMe… --- ## [Which Grove sensors are compatible for XBee S3B DigiMesh Kit Grove Development Boards](https://forums.digi.com/t/which-grove-sensors-are-compatible-for-xbee-s3b-digimesh-kit-grove-development-boards/20737)
**Author:** [@guinnpartners](https://forums.digi.com/u/guinnpartners)\ **Replies:** 0\ **Last updated:** [September 5, 2019, 2:06pm UTC](https://forums.digi.com/t/which-grove-sensors-are-compatible-for-xbee-s3b-digimesh-kit-grove-development-boards/20737 "2019-09-05T14:06:43Z")
I have the XBee S3B DigiMesh Kit that comes with 3 XBee RF modules and 3 Grove development boards that have 6 ports to connect Grove senors to. I can communicate between the 3 XBee RF modules just fine using the Digi Pyt… --- ## [Compatible Grove Sensors for XBee-PRO 900HP DigiMesh Kit](https://forums.digi.com/t/compatible-grove-sensors-for-xbee-pro-900hp-digimesh-kit/20744)
**Author:** [@guinnpartners](https://forums.digi.com/u/guinnpartners)\ **Replies:** 0\ **Last updated:** [September 5, 2019, 1:34pm UTC](https://forums.digi.com/t/compatible-grove-sensors-for-xbee-pro-900hp-digimesh-kit/20744 "2019-09-05T13:34:39Z")
I purchased a XBee-PRO 900HP DigiMesh Kit which comes with 3 XBee RF modules and 3 XBee Grove Development boards. I can communicate between the XBee modules just fine, I can send broadcasts and get back ACKs from remote … --- ## [Is Digi XBee Zigbee Modules (SMT) in Zigbee Development Tools (802.15.4) Zigbee Mesh Kit WorldWide is programmable?](https://forums.digi.com/t/is-digi-xbee-zigbee-modules-smt-in-zigbee-development-tools-802-15-4-zigbee-mesh-kit-worldwide-is-programmable/20106)
**Author:** [@Anithavenket](https://forums.digi.com/u/Anithavenket)\ **Replies:** 0\ **Last updated:** [December 20, 2018, 5:38pm UTC](https://forums.digi.com/t/is-digi-xbee-zigbee-modules-smt-in-zigbee-development-tools-802-15-4-zigbee-mesh-kit-worldwide-is-programmable/20106 "2018-12-20T17:38:02Z")
I’m planning to buy a Networking Modules XBee Gateway ZigBee to Ethernet/WiFi Int and Zigbee Development Tools (802.15.4) Zigbee Mesh Kit WorldWide to built the nurse calling system. I want to know whether that Zigbee Ga… --- ## [Xbee PRO SX watchdog timer reset randomly when sending data](https://forums.digi.com/t/xbee-pro-sx-watchdog-timer-reset-randomly-when-sending-data/18095)
**Author:** [@afvrsystems](https://forums.digi.com/u/afvrsystems)\ **Replies:** 2\ **Last updated:** [March 3, 2017, 2:20pm UTC](https://forums.digi.com/t/xbee-pro-sx-watchdog-timer-reset-randomly-when-sending-data/18095 "2017-03-03T14:20:20Z")
Hi, I’ve bought a Xbee Pro SX development kit (XK9X-DMS-0) and I updated the modules with the latest version 9004. The problem is that when I start a throughtput test in XCTU with 200 bytes packet, the module starts to… --- ## [XKP9-DMB0 - XBee-Pro 900HP (S3B) Development Kit 32K Programmable software for MAC](https://forums.digi.com/t/xkp9-dmb0-xbee-pro-900hp-s3b-development-kit-32k-programmable-software-for-mac/16882)
**Author:** [@brunoaduarte](https://forums.digi.com/u/brunoaduarte)\ **Replies:** 1\ **Last updated:** [June 6, 2016, 3:19pm UTC](https://forums.digi.com/t/xkp9-dmb0-xbee-pro-900hp-s3b-development-kit-32k-programmable-software-for-mac/16882 "2016-06-06T15:19:54Z")
Hi, i’ve just acquired a “XKP9-DMB0 - XBee-Pro 900HP (S3B) Development Kit 32K Programmable”. My question is, which software should i use to be able to develop/program these modules on MAC OSX 10.10.5 ? --- ## [Problems with the Connection DigiConnect ME9210](https://forums.digi.com/t/problems-with-the-connection-digiconnect-me9210/15562)
**Author:** [@ninsche89](https://forums.digi.com/u/ninsche89)\ **Replies:** 4\ **Last updated:** [October 26, 2015, 1:11pm UTC](https://forums.digi.com/t/problems-with-the-connection-digiconnect-me9210/15562 "2015-10-26T13:11:52Z")
Hey I have a Digi JumpStart Kit. It´s a Digi Connect ME 9210. My problem is the following. I want to connect the board with my computer. So I connect the serial port 1 from the board to my computer an I connect the E… --- ## [XStick Status:0x25?Unexpected state](https://forums.digi.com/t/xstick-status-0x25-unexpected-state/11652)
**Author:** [@William.Liu](https://forums.digi.com/u/William.Liu)\ **Replies:** 1\ **Last updated:** [September 13, 2013, 9:21am UTC](https://forums.digi.com/t/xstick-status-0x25-unexpected-state/11652 "2013-09-13T09:21:32Z")
Dear digi expert. Im using the ‘ConnectPort X2 for Smart Energy Starter Kit’ and my XStick can not join the network successfully created by ConnectPort X2. The error code of AI （Association Indication）is 0x25, where am…