# \#me9210 **URL:** https://forums.digi.com/tag/me9210/330.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [New Connect ME 9210 -C modules won't run our image.bin application!](https://forums.digi.com/t/new-connect-me-9210-c-modules-wont-run-our-image-bin-application/26643)
**Author:** [@wtech](https://forums.digi.com/u/wtech)\ **Replies:** 13\ **Last updated:** [June 1, 2026, 1:53pm UTC](https://forums.digi.com/t/new-connect-me-9210-c-modules-wont-run-our-image-bin-application/26643 "2026-06-01T13:53:49Z")
What’s broken with the latest Connect ME 9210 -C modules (DC-ME-Y402-C )? I used the default factory ftp server application to load our image.bin. The file was accepted and appears to have been programmed into flash. Bu… --- ## [Wait for user input with timeout (serial console) Digi Connect ME9210](https://forums.digi.com/t/wait-for-user-input-with-timeout-serial-console-digi-connect-me9210/23017)
**Author:** [@ottelo](https://forums.digi.com/u/ottelo)\ **Replies:** 2\ **Last updated:** [April 5, 2022, 7:49am UTC](https://forums.digi.com/t/wait-for-user-input-with-timeout-serial-console-digi-connect-me9210/23017 "2022-04-05T07:49:10Z")
I’ve a Digi Connect ME9210 connected via serial console for debugging things. After boot I want to wait for 1-2s to give the user a chance to Enter some key (dont matter what key). After 1-2s without any key the programm… --- ## [Digi Connect ME 9210 Low Power Mode](https://forums.digi.com/t/digi-connect-me-9210-low-power-mode/12587)
**Author:** [@DavidApplied](https://forums.digi.com/u/DavidApplied)\ **Replies:** 5\ **Last updated:** [September 24, 2021, 1:17pm UTC](https://forums.digi.com/t/digi-connect-me-9210-low-power-mode/12587 "2021-09-24T13:17:27Z")
I am using the Digi Connect ME 9210 EtherNet embedded system-on-module - but the power consumption is too high for the 3.3V supply I am using. During power up the ME9210 consumes over 300mA which is too much and shorts … --- ## [Connect ME 9210 ethernet negotiation loop](https://forums.digi.com/t/connect-me-9210-ethernet-negotiation-loop/22669)
**Author:** [@Benno](https://forums.digi.com/u/Benno)\ **Replies:** 3\ **Last updated:** [September 20, 2021, 12:24pm UTC](https://forums.digi.com/t/connect-me-9210-ethernet-negotiation-loop/22669 "2021-09-20T12:24:00Z")
We use a Spellman unit with a Digi Connect ME 9210 and have ethernet connection issues when using a Siemens Siemens xb005g G-bit switch. In the video below you can see how the unit starts looping after a power cycle and… --- ## [Connect me 9210 Udp Multicasting](https://forums.digi.com/t/connect-me-9210-udp-multicasting/22343)
**Author:** [@mertguler](https://forums.digi.com/u/mertguler)\ **Replies:** 1\ **Last updated:** [May 19, 2021, 8:19am UTC](https://forums.digi.com/t/connect-me-9210-udp-multicasting/22343 "2021-05-19T08:19:12Z")
Hello there I am working on Digi Connect Me 9210 What I want to do is very simple, I have a multicast device and I need to receive the udp packets from this device, so ‘udp multicasting receiver’ but I cannot join the … --- ## [ME 9210 and 9P 9215 EOL](https://forums.digi.com/t/me-9210-and-9p-9215-eol/22402)
**Author:** [@AALevine](https://forums.digi.com/u/AALevine)\ **Replies:** 1\ **Last updated:** [May 12, 2021, 2:21pm UTC](https://forums.digi.com/t/me-9210-and-9p-9215-eol/22402 "2021-05-12T14:21:35Z")
There are a bunch of mature devices listed as NRND on your WEB site but there is no corresponding EOL on the page. Two parts we use and am interested in are the Digi Connect ME9210 and the Digi ConnectCore 9P 9215. Wha… --- ## [Newbie bringing up NET+OS 7.5 and ME 9210, and sample app doesn't run.](https://forums.digi.com/t/newbie-bringing-up-net-os-7-5-and-me-9210-and-sample-app-doesnt-run/11491)
**Author:** [@eingber](https://forums.digi.com/u/eingber)\ **Replies:** 11\ **Last updated:** [March 30, 2021, 3:44pm UTC](https://forums.digi.com/t/newbie-bringing-up-net-os-7-5-and-me-9210-and-sample-app-doesnt-run/11491 "2021-03-30T15:44:23Z")
After building and debugging the FTP Server File System sample application, (1) SEGGER indicates GDB=Waiting for connection (red), (2) Console says several “Undefined command:”, (3) Debug view says “…”. Any ideas? I’… --- ## [Where might I find the factory supplied image.bin for an ME-9210](https://forums.digi.com/t/where-might-i-find-the-factory-supplied-image-bin-for-an-me-9210/21951)
**Author:** [@Nevis\_Automation](https://forums.digi.com/u/Nevis_Automation)\ **Replies:** 1\ **Last updated:** [November 2, 2020, 10:17am UTC](https://forums.digi.com/t/where-might-i-find-the-factory-supplied-image-bin-for-an-me-9210/21951 "2020-11-02T10:17:56Z")
Where could I find the ‘as supplied from digi’ version of the image.bin for the ME 9210. We have been working on field upgrading of the modules from its host. We would like to test our upgrade / initialize process agai… --- ## [Firmware upgrade via SPI Connect ME 9210](https://forums.digi.com/t/firmware-upgrade-via-spi-connect-me-9210/21245)
**Author:** [@Nevis\_Automation](https://forums.digi.com/u/Nevis_Automation)\ **Replies:** 8\ **Last updated:** [September 21, 2020, 9:22am UTC](https://forums.digi.com/t/firmware-upgrade-via-spi-connect-me-9210/21245 "2020-09-21T09:22:00Z")
Hello All. I have a Connect ME 9210 that is connected to its host via SPI. The host has an SD card that can hold a new image for the 9210. How do I go about loading a new image.bin “manually” The SPI communications a… --- ## [regex NET+OS](https://forums.digi.com/t/regex-net-os/20079)
**Author:** [@gavello](https://forums.digi.com/u/gavello)\ **Replies:** 1\ **Last updated:** [December 12, 2018, 10:03am UTC](https://forums.digi.com/t/regex-net-os/20079 "2018-12-12T10:03:12Z")
It looks like NET OS does not come with a regex library. Does anyone uses a regex library with NET OS that can suggest? --- ## [How can I re-flash the original bootloader for Connect Me 9210 via Jtag?](https://forums.digi.com/t/how-can-i-re-flash-the-original-bootloader-for-connect-me-9210-via-jtag/19930)
**Author:** [@dragos1](https://forums.digi.com/u/dragos1)\ **Replies:** 1\ **Last updated:** [October 18, 2018, 7:52am UTC](https://forums.digi.com/t/how-can-i-re-flash-the-original-bootloader-for-connect-me-9210-via-jtag/19930 "2018-10-18T07:52:38Z")
Hello together, I have a Connect Me 9210 Module with Jtag and a Segger JLink Plus Jtag Debugger. I have played a little bit with a customized bootloader and unfortunately the FTP upload code does not work anymore. I’v… --- ## [connect wi-me 9210 wpa2 enterprise encrpyption](https://forums.digi.com/t/connect-wi-me-9210-wpa2-enterprise-encrpyption/19800)
**Author:** [@dspsis](https://forums.digi.com/u/dspsis)\ **Replies:** 0\ **Last updated:** [August 20, 2018, 11:23am UTC](https://forums.digi.com/t/connect-wi-me-9210-wpa2-enterprise-encrpyption/19800 "2018-08-20T11:23:08Z")
Good morning, we have a question about the encryption mode on the module DIGI Connect WI-ME (9210)- We need to link this module to a customer network infrastructure that uses the WPA2 Enterprise encryption mode. Is thi… --- ## [How can i troubleshoot Digi Connect ME 9210?](https://forums.digi.com/t/how-can-i-troubleshoot-digi-connect-me-9210/18952)
**Author:** [@ritesh19951](https://forums.digi.com/u/ritesh19951)\ **Replies:** 6\ **Last updated:** [December 22, 2017, 11:33am UTC](https://forums.digi.com/t/how-can-i-troubleshoot-digi-connect-me-9210/18952 "2017-12-22T11:33:34Z")
My Digi Connect ME module does not communicate with laptop. Every time I connect it through LAN wire it’s green light blink for 3 times then off for always.However it’s yellow light is on till it connect to the lan wire.… --- ## [How can I troubleshoot DIGI connect ME?](https://forums.digi.com/t/how-can-i-troubleshoot-digi-connect-me/18951)
**Author:** [@ritesh19951](https://forums.digi.com/u/ritesh19951)\ **Replies:** 1\ **Last updated:** [December 14, 2017, 6:31pm UTC](https://forums.digi.com/t/how-can-i-troubleshoot-digi-connect-me/18951 "2017-12-14T18:31:20Z")
I could not connect the DIGI connect ME to my computer. Yellow Light is on but green light is not blinking as requirement. It only blink at the start when It get power. So what can be the way to repair it. --- ## [flash me9210 timeout](https://forums.digi.com/t/flash-me9210-timeout/18648)
**Author:** [@jnewell](https://forums.digi.com/u/jnewell)\ **Replies:** 6\ **Last updated:** [August 30, 2017, 9:41am UTC](https://forums.digi.com/t/flash-me9210-timeout/18648 "2017-08-30T09:41:16Z")
Recent deliveries of the ME9210 cannot be flashed using DigiEL 5.7.2 or any earlier version. It always reports ‘Timeout’ This has been raised before, but is unresolved. The installed Linux is 2.6.35.14-del-5.7.0. Tracin… --- ## [Digi Embedded Linux 5.7: Target selection failed](https://forums.digi.com/t/digi-embedded-linux-5-7-target-selection-failed/18515)
**Author:** [@sandeshnie](https://forums.digi.com/u/sandeshnie)\ **Replies:** 2\ **Last updated:** [July 11, 2017, 2:09pm UTC](https://forums.digi.com/t/digi-embedded-linux-5-7-target-selection-failed/18515 "2017-07-11T14:09:38Z")
I am using DEL5.7 in VM. When I debug the Hello World application as ‘Remote C/C++ Application’, I get the following error: Target selection failed. 192.168.0.230:8086: Connection refused. 192.168.0.230:8086: Connecti… --- ## [FLASH0 Access Premission](https://forums.digi.com/t/flash0-access-premission/18335)
**Author:** [@gavello](https://forums.digi.com/u/gavello)\ **Replies:** 3\ **Last updated:** [May 11, 2017, 4:53am UTC](https://forums.digi.com/t/flash0-access-premission/18335 "2017-05-11T04:53:06Z")
I have a simple thread that store some persistent data into a file stored inside FLASH0 memory. I’m noticing that file is accessible without restrictions from web browser using the url http:///FS/FLASH0// this behavior… --- ## [How to get DNS address?](https://forums.digi.com/t/how-to-get-dns-address/17949)
**Author:** [@stepik](https://forums.digi.com/u/stepik)\ **Replies:** 4\ **Last updated:** [February 2, 2017, 12:25pm UTC](https://forums.digi.com/t/how-to-get-dns-address/17949 "2017-02-02T12:25:01Z")
Hello, I’m using Connect ME9210 with NET+OS. Is there any way to read DNS address when DHCP is enabled? I use ‘customizeIamGetIfAddrInfo()’ which gives me current IP, subnet mask, gateway, but DNS is reported as 0.0.0.… --- ## [Processor time](https://forums.digi.com/t/processor-time/17817)
**Author:** [@stepik](https://forums.digi.com/u/stepik)\ **Replies:** 2\ **Last updated:** [December 23, 2016, 11:25am UTC](https://forums.digi.com/t/processor-time/17817 "2016-12-23T11:25:45Z")
Hello, I’m using Connect ME 9210 with NET+OS. I need to get processor clock time (number of ticks elapsed since the program was launched). So that I can compute how long the program has been running. I noticed the fun… --- ## [Store Value in Flash from ME9210](https://forums.digi.com/t/store-value-in-flash-from-me9210/17484)
**Author:** [@haribofan](https://forums.digi.com/u/haribofan)\ **Replies:** 1\ **Last updated:** [October 20, 2016, 4:45pm UTC](https://forums.digi.com/t/store-value-in-flash-from-me9210/17484 "2016-10-20T16:45:01Z")
Hello, I will transmit a Byte value to the device over a TCP socket. Is it possible to store the byte value in the flash from ME9210? After a reboot i will read the value from the flash. How do i program this?? --- ## [Problem to connect with Realport Sample on ME9210](https://forums.digi.com/t/problem-to-connect-with-realport-sample-on-me9210/17285)
**Author:** [@haribofan](https://forums.digi.com/u/haribofan)\ **Replies:** 3\ **Last updated:** [August 24, 2016, 8:06am UTC](https://forums.digi.com/t/problem-to-connect-with-realport-sample-on-me9210/17285 "2016-08-24T08:06:07Z")
Hello, I have a Digi ME9210 with the REal port sample and a dev board. The Realport Software on Win7 can not find the device!!(40002549\_G) The Digi Device Discovery in ESP can find the device! Ping is ok. I have che… --- ## [real port Sample](https://forums.digi.com/t/real-port-sample/17211)
**Author:** [@haribofan](https://forums.digi.com/u/haribofan)\ **Replies:** 0\ **Last updated:** [August 7, 2016, 12:10pm UTC](https://forums.digi.com/t/real-port-sample/17211 "2016-08-07T12:10:04Z")
Hello, I have a Digi ME9210 with the REal port sample and a dev board. After a reset i get this message on the com port. IAM:Got STATIC IPv4 address 192.168.1.5 on interface eth0 Network IP configured. RealPort: Rea… --- ## [Is possible to have 2x UARTs and 1x I2C on Connect ME9210 ?](https://forums.digi.com/t/is-possible-to-have-2x-uarts-and-1x-i2c-on-connect-me9210/16934)
**Author:** [@dvorak\_mikroklima](https://forums.digi.com/u/dvorak_mikroklima)\ **Replies:** 1\ **Last updated:** [June 15, 2016, 12:23pm UTC](https://forums.digi.com/t/is-possible-to-have-2x-uarts-and-1x-i2c-on-connect-me9210/16934 "2016-06-15T12:23:16Z")
I need 2x UARTs and 1x I2C on ME9210. Is it possible ? --- ## [how would the device handle a overloaded A record’ in a DNS entry](https://forums.digi.com/t/how-would-the-device-handle-a-overloaded-a-record-in-a-dns-entry/16187)
**Author:** [@Mike\_Devine](https://forums.digi.com/u/Mike_Devine)\ **Replies:** 0\ **Last updated:** [February 1, 2016, 9:08am UTC](https://forums.digi.com/t/how-would-the-device-handle-a-overloaded-a-record-in-a-dns-entry/16187 "2016-02-01T09:08:40Z")
“‘how would the device handle a overloaded A record’ in a DNS entry. This is where a DNS record holds multiple IP addresses for a domain for purposes of service resiliency. The question is whether the on-board software o… --- ## [POE for ME9210](https://forums.digi.com/t/poe-for-me9210/16025)
**Author:** [@steved2](https://forums.digi.com/u/steved2)\ **Replies:** 2\ **Last updated:** [January 8, 2016, 8:32am UTC](https://forums.digi.com/t/poe-for-me9210/16025 "2016-01-08T08:32:05Z")
The ME9210 has two pins VETH+ and VETH-, but the manual is silent on how they are connected to the network socket. Two related questions: Are there bridge rectifiers internally, so that the stated output polarity is al… --- ## [Serial Port Digi Connect ME9210](https://forums.digi.com/t/serial-port-digi-connect-me9210/15598)
**Author:** [@ninsche89](https://forums.digi.com/u/ninsche89)\ **Replies:** 2\ **Last updated:** [November 17, 2015, 11:54am UTC](https://forums.digi.com/t/serial-port-digi-connect-me9210/15598 "2015-11-17T11:54:13Z")
Hey I wanna programm the serial Port. I have a Digi Connect ME9210 modul an the Developmentboard from Digi. I use the DigiESP software. Now I wanna programm that the DigiModul send and receve data over the serial por… --- ## [Problems with the Connection DigiConnect ME9210](https://forums.digi.com/t/problems-with-the-connection-digiconnect-me9210/15562)
**Author:** [@ninsche89](https://forums.digi.com/u/ninsche89)\ **Replies:** 4\ **Last updated:** [October 26, 2015, 1:11pm UTC](https://forums.digi.com/t/problems-with-the-connection-digiconnect-me9210/15562 "2015-10-26T13:11:52Z")
Hey I have a Digi JumpStart Kit. It´s a Digi Connect ME 9210. My problem is the following. I want to connect the board with my computer. So I connect the serial port 1 from the board to my computer an I connect the E… --- ## [Digi Module connect me 9210 AWS Server](https://forums.digi.com/t/digi-module-connect-me-9210-aws-server/15393)
**Author:** [@mhdazeem](https://forums.digi.com/u/mhdazeem)\ **Replies:** 3\ **Last updated:** [September 11, 2015, 9:00am UTC](https://forums.digi.com/t/digi-module-connect-me-9210-aws-server/15393 "2015-09-11T09:00:17Z")
Hi, I know this is nasty question but I am new to the embedded work and this is my first project. I am going to implement an aws server in digi module through which we can get digi module ip address and then can change… --- ## [Change wifi access point Connect wi-me 9210](https://forums.digi.com/t/change-wifi-access-point-connect-wi-me-9210/15327)
**Author:** [@Emeric](https://forums.digi.com/u/Emeric)\ **Replies:** 1\ **Last updated:** [August 31, 2015, 10:33am UTC](https://forums.digi.com/t/change-wifi-access-point-connect-wi-me-9210/15327 "2015-08-31T10:33:45Z")
Hello, My problem is how to change the wifi access point with command line on a Connect Wi-ME, the device is already connected to the “Connect” SSID with no password but now I would like to put the device on my personal… --- ## [Linux complier and versions](https://forums.digi.com/t/linux-complier-and-versions/12257)
**Author:** [@Cairn](https://forums.digi.com/u/Cairn)\ **Replies:** 7\ **Last updated:** [August 31, 2015, 10:16am UTC](https://forums.digi.com/t/linux-complier-and-versions/12257 "2015-08-31T10:16:25Z")
I’ve created a VM with the Digi embedded Linux. Does the cmd line complier, compile for the target Arm device, or for the native platform? It’s just that I wish to compile and open source library for the me9201 device. … [Next page](https://forums.digi.com/tag/me9210/330.md?match_all_tags=true&page=1&tags%5B%5D=me9210)