# \#micro

**URL:** https://forums.digi.com/tag/micro/967.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [XBEE 3 Micro seems to be unresponsive](https://forums.digi.com/t/xbee-3-micro-seems-to-be-unresponsive/20844)

<div class="topic-metadata">

**Author:** [@saibit](https://forums.digi.com/u/saibit)\
**Replies:** 0\
**Last updated:** [October 23, 2019, 9:39am UTC](https://forums.digi.com/t/xbee-3-micro-seems-to-be-unresponsive/20844 "2019-10-23T09:39:53Z")

</div>

I have a XBee Micro (XB3-24Z8CM REV C), which is being used on a custom PCB. Commands are sent via the serial interface to enter command mode (‘+++’). Using an oscilloscope, I checked the signals on the pins. I have the…

---

## [How to connect XBEE3 digimesh mico moudle XCTU?](https://forums.digi.com/t/how-to-connect-xbee3-digimesh-mico-moudle-xctu/19465)

<div class="topic-metadata">

**Author:** [@karthikn](https://forums.digi.com/u/karthikn)\
**Replies:** 0\
**Last updated:** [May 4, 2018, 12:00pm UTC](https://forums.digi.com/t/how-to-connect-xbee3-digimesh-mico-moudle-xctu/19465 "2018-05-04T12:00:40Z")

</div>

How to connect the XBEE3 digimesh micro module to XCTU? Is it possible to connect XBEE3 digimesh micro module to XCTU SW without development kit? Part no XBEE3 digimesh micro module devlopment kit?

---

## [incoming calling on datafire micro V isdn](https://forums.digi.com/t/incoming-calling-on-datafire-micro-v-isdn/12572)

<div class="topic-metadata">

**Author:** [@arcbaro](https://forums.digi.com/u/arcbaro)\
**Replies:** 0\
**Last updated:** [February 24, 2014, 8:55am UTC](https://forums.digi.com/t/incoming-calling-on-datafire-micro-v-isdn/12572 "2014-02-24T08:55:00Z")

</div>

Can I configure the line 1 with only one incoming call and the second on the same line result occupated? thank’s you, Arcaldo

---

## [how to configure Xbee without PC?](https://forums.digi.com/t/how-to-configure-xbee-without-pc/12236)

<div class="topic-metadata">

**Author:** [@AJ84](https://forums.digi.com/u/AJ84)\
**Replies:** 4\
**Last updated:** [December 11, 2013, 2:44pm UTC](https://forums.digi.com/t/how-to-configure-xbee-without-pc/12236 "2013-12-11T14:44:30Z")

</div>

I want to completely eliminate PC involvement. I want to configure xbee for a simple point to point comms. Is this possible using AT command set?? Thanks
