# \#minicom

**URL:** https://forums.digi.com/tag/minicom/1936.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [Setup Xbee S2 only with only "minicom"](https://forums.digi.com/t/setup-xbee-s2-only-with-only-minicom/16176)

<div class="topic-metadata">

**Author:** [@dannylin](https://forums.digi.com/u/dannylin)\
**Replies:** 2\
**Last updated:** [March 1, 2016, 8:05am UTC](https://forums.digi.com/t/setup-xbee-s2-only-with-only-minicom/16176 "2016-03-01T08:05:34Z")

</div>

I want to setup two Xbee with raspberry pi. Therefore, I used “minicom” to Tx/Rx the serial from/to Xbee. I succeed to follow the command line setup instructions (such as ATID, DL, DH), and receive “OK” from Xbee. Howeve…

---

## [XBee Serial Output printing wrong characters](https://forums.digi.com/t/xbee-serial-output-printing-wrong-characters/14351)

<div class="topic-metadata">

**Author:** [@ian4h](https://forums.digi.com/u/ian4h)\
**Replies:** 1\
**Last updated:** [February 25, 2015, 3:56pm UTC](https://forums.digi.com/t/xbee-serial-output-printing-wrong-characters/14351 "2015-02-25T15:56:18Z")

</div>

I have three XBee modules configured in a network. Two are configured as Router/End devices (AT mode) and one as the coordinator in API mode. The end devices are connected to sensors and are sending data back to the coo…