# \#mode

**URL:** https://forums.digi.com/tag/mode/403.md?match_all_tags=true&page=1&tags%5B%5D=mode

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

**Page:** 2

---

## [XBee 2 sleep mode / initial wake-up](https://forums.digi.com/t/xbee-2-sleep-mode-initial-wake-up/14907)

<div class="topic-metadata">

**Author:** [@Arno](https://forums.digi.com/u/Arno)\
**Replies:** 1\
**Last updated:** [June 2, 2015, 4:13pm UTC](https://forums.digi.com/t/xbee-2-sleep-mode-initial-wake-up/14907 "2015-06-02T16:13:12Z")

</div>

Hi, I have two Xbee S2, first one running as a coordinator in API mode, second one as a router in AT mode. The router reads an analog value (temp sensor) on its AD3 and sends the value to the coordinator. Please note t…

---

## [Xbee S8 868LP DPUS Sleep Option (ATSO)](https://forums.digi.com/t/xbee-s8-868lp-dpus-sleep-option-atso/14890)

<div class="topic-metadata">

**Author:** [@hummus](https://forums.digi.com/u/hummus)\
**Replies:** 1\
**Last updated:** [May 29, 2015, 9:08am UTC](https://forums.digi.com/t/xbee-s8-868lp-dpus-sleep-option-atso/14890 "2015-05-29T09:08:22Z")

</div>

Hello Digi-Forum users, I have a problem concerning a 868LP DPUS module (10k variant). I have updated the firmware to the latest version (1074), however response to the ATSO1(0x02) command keeps saying “ERROR”. Is thi…

---

## [How to, automatically, make all Xbee wake up/sleep when coordinator turns on/off?](https://forums.digi.com/t/how-to-automatically-make-all-xbee-wake-up-sleep-when-coordinator-turns-on-off/14889)

<div class="topic-metadata">

**Author:** [@eng.sergiosoares](https://forums.digi.com/u/eng.sergiosoares)\
**Replies:** 1\
**Last updated:** [May 27, 2015, 4:06pm UTC](https://forums.digi.com/t/how-to-automatically-make-all-xbee-wake-up-sleep-when-coordinator-turns-on-off/14889 "2015-05-27T16:06:07Z")

</div>

Hi guys, I want to solve the following problem: In my system I use API mode. I have 5 Xbees (1 coordinator) e 4 routers. The routers send samples every 50ms and never sleep. But, sometimes, the coordinator is manually t…

---

## [X4 Connector Port Gateway in batch mode](https://forums.digi.com/t/x4-connector-port-gateway-in-batch-mode/14768)

<div class="topic-metadata">

**Author:** [@thingtrack](https://forums.digi.com/u/thingtrack)\
**Replies:** 3\
**Last updated:** [April 30, 2015, 9:00am UTC](https://forums.digi.com/t/x4-connector-port-gateway-in-batch-mode/14768 "2015-04-30T09:00:07Z")

</div>

How can save my sensor data in my X4 Connector Port when I suffer a GPRS disconnection an later recover the data and resend to my digi cloud accout?

---

## [How can we transmit an array of data from one xbee S1 to another xbee module in AT mode?](https://forums.digi.com/t/how-can-we-transmit-an-array-of-data-from-one-xbee-s1-to-another-xbee-module-in-at-mode/14652)

<div class="topic-metadata">

**Author:** [@ritalin046](https://forums.digi.com/u/ritalin046)\
**Replies:** 1\
**Last updated:** [April 12, 2015, 6:09pm UTC](https://forums.digi.com/t/how-can-we-transmit-an-array-of-data-from-one-xbee-s1-to-another-xbee-module-in-at-mode/14652 "2015-04-12T18:09:51Z")

</div>

Being new to the world of xbee’s, i have a basic question in mind that whether we could transmit an array from one xbee to another, in AT mode?? Researching all over the internet, i happened to see much about API mode f…

---

## [Sending XBee S1 to sleep mode remotely](https://forums.digi.com/t/sending-xbee-s1-to-sleep-mode-remotely/14328)

<div class="topic-metadata">

**Author:** [@Yasser\_Khalil](https://forums.digi.com/u/Yasser_Khalil)\
**Replies:** 0\
**Last updated:** [February 9, 2015, 11:46pm UTC](https://forums.digi.com/t/sending-xbee-s1-to-sleep-mode-remotely/14328 "2015-02-09T23:46:30Z")

</div>

I have two xbee s1 modules. The base set in API mode (acting as the coordinator) and is connected to a microcontroller. While the other xbee module (remote) is set in AT mode and connected to a sensor. The remote xbee m…

---

## [If Xbee module is set in API mode thr X-CTU software, does I need to set it again in API mode thru AT comm in appl](https://forums.digi.com/t/if-xbee-module-is-set-in-api-mode-thr-x-ctu-software-does-i-need-to-set-it-again-in-api-mode-thru-at-comm-in-appl/14212)

<div class="topic-metadata">

**Author:** [@aniljgupta](https://forums.digi.com/u/aniljgupta)\
**Replies:** 1\
**Last updated:** [January 20, 2015, 1:45pm UTC](https://forums.digi.com/t/if-xbee-module-is-set-in-api-mode-thr-x-ctu-software-does-i-need-to-set-it-again-in-api-mode-thru-at-comm-in-appl/14212 "2015-01-20T13:45:57Z")

</div>

If Xbee module is set in API mode through X-CTU software, does I need to set it again in API mode I want to put Xbee module in API mode thru X-CTU software & then useit in my embedded application through API mode comman…

---

## [XBee in pin sleep mode don't wake up again after the signal goes back to non sleep level](https://forums.digi.com/t/xbee-in-pin-sleep-mode-dont-wake-up-again-after-the-signal-goes-back-to-non-sleep-level/13977)

<div class="topic-metadata">

**Author:** [@Wolf](https://forums.digi.com/u/Wolf)\
**Replies:** 1\
**Last updated:** [November 24, 2014, 10:37am UTC](https://forums.digi.com/t/xbee-in-pin-sleep-mode-dont-wake-up-again-after-the-signal-goes-back-to-non-sleep-level/13977 "2014-11-24T10:37:11Z")

</div>

We are developing a batterie driven data collection system with a PIC 24F microcontroller and a XBee S2 radio modul. To reduce the power demand of the XBee we want to use the sleep functionality. This will be triggered b…

---

## [How to set sleep mode off on Digi transport wr21 cdma modem router?](https://forums.digi.com/t/how-to-set-sleep-mode-off-on-digi-transport-wr21-cdma-modem-router/13314)

<div class="topic-metadata">

**Author:** [@multicomsecurity](https://forums.digi.com/u/multicomsecurity)\
**Replies:** 1\
**Last updated:** [September 4, 2014, 8:44am UTC](https://forums.digi.com/t/how-to-set-sleep-mode-off-on-digi-transport-wr21-cdma-modem-router/13314 "2014-09-04T08:44:40Z")

</div>

---

## [SPI clock mode will not change - RCM3750](https://forums.digi.com/t/spi-clock-mode-will-not-change-rcm3750/13259)

<div class="topic-metadata">

**Author:** [@bhuelster](https://forums.digi.com/u/bhuelster)\
**Replies:** 2\
**Last updated:** [July 8, 2014, 10:58am UTC](https://forums.digi.com/t/spi-clock-mode-will-not-change-rcm3750/13259 "2014-07-08T10:58:30Z")

</div>

I have used SPI many times with RCM devices and now have a need to use SPI with a new device that uses a different clock edge and bit pattern than default — every effort to change clock mode using the SPI library and SPI…

---

## [Does using API mode 2 affect the maximum payload size?](https://forums.digi.com/t/does-using-api-mode-2-affect-the-maximum-payload-size/13106)

<div class="topic-metadata">

**Author:** [@Shannon](https://forums.digi.com/u/Shannon)\
**Replies:** 2\
**Last updated:** [June 9, 2014, 11:15pm UTC](https://forums.digi.com/t/does-using-api-mode-2-affect-the-maximum-payload-size/13106 "2014-06-09T23:15:39Z")

</div>

If operating in API mode and using escaped characters (AP=2), is the maximum payload size reduced? In other words, if my un-escaped message fills the maximum payload (ATNP = 84), but after applying the escaping it excee…

---

## [XBP24BZ7 (S2B) fail to communicate when using Destination Address but works when broadcasting](https://forums.digi.com/t/xbp24bz7-s2b-fail-to-communicate-when-using-destination-address-but-works-when-broadcasting/13063)

<div class="topic-metadata">

**Author:** [@andresjk](https://forums.digi.com/u/andresjk)\
**Replies:** 4\
**Last updated:** [June 5, 2014, 1:52am UTC](https://forums.digi.com/t/xbp24bz7-s2b-fail-to-communicate-when-using-destination-address-but-works-when-broadcasting/13063 "2014-06-05T01:52:01Z")

</div>

Hi, I have two XBP24BZ7 (S2B) Xbee pro modules. They work perfectly in AT mode and even in API mode when the Destination Address is broadcast (0x000000000000FFFF). The problem arises when I try to set up the destionat…

---

## [XBEE Sleep mode (Sampling on Wakeup)](https://forums.digi.com/t/xbee-sleep-mode-sampling-on-wakeup/13003)

<div class="topic-metadata">

**Author:** [@Digi\_Fan](https://forums.digi.com/u/Digi_Fan)\
**Replies:** 11\
**Last updated:** [May 30, 2014, 1:14pm UTC](https://forums.digi.com/t/xbee-sleep-mode-sampling-on-wakeup/13003 "2014-05-30T13:14:52Z")

</div>

Hello There, I have configured my XBEE Series 1 in Sleep mode , but when i send it a low signal on pin 9 to wake it up… it starts sending samples each 5 seconds as long as the module is awake. so could any one please te…

---

## [API mode 1 versus mode 2](https://forums.digi.com/t/api-mode-1-versus-mode-2/12412)

<div class="topic-metadata">

**Author:** [@gapman](https://forums.digi.com/u/gapman)\
**Replies:** 1\
**Last updated:** [May 22, 2014, 2:58pm UTC](https://forums.digi.com/t/api-mode-1-versus-mode-2/12412 "2014-05-22T14:58:46Z")

</div>

Hello, I’m using the Xbee Pro 900MHz S3B (model XBP9B DMUT-002). I am implementing API mode for my application (currently API mode 1). My questions: In API mode 1, will the Xbee module respond with unsolicited TX St…

---

## [Can Coordinator Xbee Series 1 API Mode forward packets between two End Nodes?](https://forums.digi.com/t/can-coordinator-xbee-series-1-api-mode-forward-packets-between-two-end-nodes/12215)

<div class="topic-metadata">

**Author:** [@burrito007](https://forums.digi.com/u/burrito007)\
**Replies:** 1\
**Last updated:** [May 12, 2014, 11:21am UTC](https://forums.digi.com/t/can-coordinator-xbee-series-1-api-mode-forward-packets-between-two-end-nodes/12215 "2014-05-12T11:21:58Z")

</div>

I am trying to set up an xbee network (series 1). The goal is to set up a network with three nodes (eventually 4) and measure packet loss in a multi-hop network. I have used X-CTU to configure three xbees. I want to u…

---

## [Cannot get into command mode but XCTU works perfectly](https://forums.digi.com/t/cannot-get-into-command-mode-but-xctu-works-perfectly/12657)

<div class="topic-metadata">

**Author:** [@dukeofdoom](https://forums.digi.com/u/dukeofdoom)\
**Replies:** 1\
**Last updated:** [April 6, 2014, 5:36pm UTC](https://forums.digi.com/t/cannot-get-into-command-mode-but-xctu-works-perfectly/12657 "2014-04-06T17:36:59Z")

</div>

I have an XBEE ZB running coordinator API mode. It works fine in XCTU (MAC version)I can send remote packets in XCTU. ALL functions in XCTU work with this XBEE. When I use coolterm to connect to the xbee I cannot ente…

---

## [What are the causes of a "stack error"?](https://forums.digi.com/t/what-are-the-causes-of-a-stack-error/11745)

<div class="topic-metadata">

**Author:** [@andyg](https://forums.digi.com/u/andyg)\
**Replies:** 1\
**Last updated:** [September 29, 2013, 4:06pm UTC](https://forums.digi.com/t/what-are-the-causes-of-a-stack-error/11745 "2013-09-29T16:06:45Z")

</div>

Hi, I am developing a product, and while using a XBee Pro S2B in End User mode, latest API firmware from web site, am getting regular Modem Status response \>= 0x80 (0x8C to be precise) which in the manual says is a “sta…

---

## [1 XBee handles wireless programming + remote control, Arduino?](https://forums.digi.com/t/1-xbee-handles-wireless-programming-remote-control-arduino/11649)

<div class="topic-metadata">

**Author:** [@helium](https://forums.digi.com/u/helium)\
**Replies:** 0\
**Last updated:** [June 25, 2013, 2:21pm UTC](https://forums.digi.com/t/1-xbee-handles-wireless-programming-remote-control-arduino/11649 "2013-06-25T14:21:33Z")

</div>

Hi, I am working on a project using an Arduino Pro Mini 3.3 V 8 mHz, along with an XBee wireless module. Basically a remote control. The XBee is used to communicate with another XBee on a robot. However, I also want to…

---

## [Status information, XB 24-B (API Mode)](https://forums.digi.com/t/status-information-xb-24-b-api-mode/11632)

<div class="topic-metadata">

**Author:** [@C\_Schroder](https://forums.digi.com/u/C_Schroder)\
**Replies:** 1\
**Last updated:** [June 21, 2013, 11:07am UTC](https://forums.digi.com/t/status-information-xb-24-b-api-mode/11632 "2013-06-21T11:07:27Z")

</div>

I just got 2 “XB 24-B” Modules Hardware-Version: 1941 1 works as Coordinator API and the other one as Router AT The first Question is, how can i get the status information from the Inputs (high/low)? I was able to s…

---

## [Transmit request frame results in MAC ACK Failure in XBee 868.](https://forums.digi.com/t/transmit-request-frame-results-in-mac-ack-failure-in-xbee-868/11521)

<div class="topic-metadata">

**Author:** [@kmarcine](https://forums.digi.com/u/kmarcine)\
**Replies:** 1\
**Last updated:** [May 23, 2013, 11:58am UTC](https://forums.digi.com/t/transmit-request-frame-results-in-mac-ack-failure-in-xbee-868/11521 "2013-05-23T11:58:20Z")

</div>

I’m using two XBee 868 modules, API mode. After using transmit request frame with address of the other module I get MAC ACK Failure as a transmit status frame. When I use broadcast address, transmit status is ok. However…

---

## [Without MCU getting data from Digital- Analog I/Os](https://forums.digi.com/t/without-mcu-getting-data-from-digital-analog-i-os/11486)

<div class="topic-metadata">

**Author:** [@ysfgrm](https://forums.digi.com/u/ysfgrm)\
**Replies:** 1\
**Last updated:** [May 13, 2013, 1:38pm UTC](https://forums.digi.com/t/without-mcu-getting-data-from-digital-analog-i-os/11486 "2013-05-13T13:38:36Z")

</div>

If I send data of temperature / pressure etc from XBee’s i/o pins, Will it send these informations to another XBee without using any other microcontroller - pic / msp430 etc.??? And because of this should I use API mode…

[Previous page](https://forums.digi.com/tag/mode/403.md?match_all_tags=true&tags%5B%5D=mode)
