# \#mounting

**URL:** https://forums.digi.com/tag/mounting/1565.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [Range of XBee Pro RF module](https://forums.digi.com/t/range-of-xbee-pro-rf-module/22745)

<div class="topic-metadata">

**Author:** [@luyar](https://forums.digi.com/u/luyar)\
**Replies:** 1\
**Last updated:** [October 21, 2021, 10:15am UTC](https://forums.digi.com/t/range-of-xbee-pro-rf-module/22745 "2021-10-21T10:15:04Z")

</div>

Hi, I am working on the XBEE RF module and it’s not giving the range as mentioned in the datasheet. I just move out of the room and stop getting data. If there’s some hurdle like a wall, then the range got even lower. …

---

## [Options to Mount XBee/XBee-PRO SX RF Module](https://forums.digi.com/t/options-to-mount-xbee-xbee-pro-sx-rf-module/22276)

<div class="topic-metadata">

**Author:** [@flywire](https://forums.digi.com/u/flywire)\
**Replies:** 2\
**Last updated:** [June 29, 2021, 10:28am UTC](https://forums.digi.com/t/options-to-mount-xbee-xbee-pro-sx-rf-module/22276 "2021-06-29T10:28:12Z")

</div>

The XBee/XBee-PRO SX RF Module has an additional ground pad on the underside of the module used for heat dissipation which can only be accesssed by reflow soldering. The PCB design and manufacturing gives the recommended…

---

## [WR21 bottom plate mounting screw thread size](https://forums.digi.com/t/wr21-bottom-plate-mounting-screw-thread-size/21677)

<div class="topic-metadata">

**Author:** [@jserink](https://forums.digi.com/u/jserink)\
**Replies:** 1\
**Last updated:** [September 24, 2020, 1:23pm UTC](https://forums.digi.com/t/wr21-bottom-plate-mounting-screw-thread-size/21677 "2020-09-24T13:23:47Z")

</div>

Hello: On the bottom of the WR21 there are two threaded screw holes, we want to attache DIN rail clips there. Does anyone know the thread size of those two holes and what he maximum screw length should be? Cheers, jo…

---

## [AnywhereUSB 2 Plus mounting screws](https://forums.digi.com/t/anywhereusb-2-plus-mounting-screws/21108)

<div class="topic-metadata">

**Author:** [@m\_online](https://forums.digi.com/u/m_online)\
**Replies:** 3\
**Last updated:** [July 24, 2020, 9:28am UTC](https://forums.digi.com/t/anywhereusb-2-plus-mounting-screws/21108 "2020-07-24T09:28:45Z")

</div>

There are screw holes on the back, for mounting I presume. What screw dimension do I need?

---

## [bl4s200 mounting hole](https://forums.digi.com/t/bl4s200-mounting-hole/13447)

<div class="topic-metadata">

**Author:** [@yang](https://forums.digi.com/u/yang)\
**Replies:** 1\
**Last updated:** [August 11, 2014, 4:36pm UTC](https://forums.digi.com/t/bl4s200-mounting-hole/13447 "2014-08-11T16:36:19Z")

</div>

I am using BL4S200. I design my board to interface with BL4S200. I will put BL4s200 on the top of my board, so I need position mount hole. Could you please provide a mechanical dimension of Bl4s200. a dwg file would be t…