# \#n

**URL:** https://forums.digi.com/tag/n/2884.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [port server reset factory P/N (1P)50000854-10 A1](https://forums.digi.com/t/port-server-reset-factory-p-n-1p-50000854-10-a1/21667)

<div class="topic-metadata">

**Author:** [@temox23](https://forums.digi.com/u/temox23)\
**Replies:** 1\
**Last updated:** [August 13, 2020, 2:18pm UTC](https://forums.digi.com/t/port-server-reset-factory-p-n-1p-50000854-10-a1/21667 "2020-08-13T14:18:41Z")

</div>

how can reset factory defaults setting on muyg port server partr number (1P)50000854-10 A1

---

## [How to change the GPIOs state of the digi connect me 9210 with firmware?](https://forums.digi.com/t/how-to-change-the-gpios-state-of-the-digi-connect-me-9210-with-firmware/16839)

<div class="topic-metadata">

**Author:** [@m271828ngtao](https://forums.digi.com/u/m271828ngtao)\
**Replies:** 2\
**Last updated:** [May 31, 2017, 10:41am UTC](https://forums.digi.com/t/how-to-change-the-gpios-state-of-the-digi-connect-me-9210-with-firmware/16839 "2017-05-31T10:41:14Z")

</div>

I have got a digi connect me 9210 module with plug N play firmware,But when I used web pages or the commandline to configure the GPIOs,I found the states of GPIOs cannot change immediately.I want to control some LEDs thr…

---

## [change the state of gpios immediately without reboot](https://forums.digi.com/t/change-the-state-of-gpios-immediately-without-reboot/17073)

<div class="topic-metadata">

**Author:** [@m271828ngtao](https://forums.digi.com/u/m271828ngtao)\
**Replies:** 4\
**Last updated:** [August 5, 2016, 12:03am UTC](https://forums.digi.com/t/change-the-state-of-gpios-immediately-without-reboot/17073 "2016-08-05T00:03:00Z")

</div>

I have tried these commands for many times. What I confused is that after I enter the command ‘set gpio mode=output state=asserted’, the state of gpios do not change immediately. The state is initial state, only if you r…

---

## [change the gpio state immediately](https://forums.digi.com/t/change-the-gpio-state-immediately/17064)

<div class="topic-metadata">

**Author:** [@m271828ngtao](https://forums.digi.com/u/m271828ngtao)\
**Replies:** 1\
**Last updated:** [July 11, 2016, 6:02pm UTC](https://forums.digi.com/t/change-the-gpio-state-immediately/17064 "2016-07-11T18:02:35Z")

</div>

how can i change the state of gpio on digi connect me 9210 with plug N’play firmware immediately. I can change the initial state of gpio thru web interface, but if i want to change the state of them, how can i do? which …