# \#nat **URL:** https://forums.digi.com/tag/nat/188.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [WR 21 or 31 VPN with overlapping subnets](https://forums.digi.com/t/wr-21-or-31-vpn-with-overlapping-subnets/32232)
**Author:** [@ant](https://forums.digi.com/u/ant)\ **Replies:** 1\ **Last updated:** [September 4, 2024, 11:41pm UTC](https://forums.digi.com/t/wr-21-or-31-vpn-with-overlapping-subnets/32232 "2024-09-04T23:41:09Z")
Newbie here and production has 2 WR21 respective at each site running SW 8.0.0 and there is overlapping subnet 192.168.2.X/24 at each site. The internet side is on cellular. Will the WR work with overlapping subnets? If … --- ## [does anyone know how to NAT on a IX20](https://forums.digi.com/t/does-anyone-know-how-to-nat-on-a-ix20/23048)
**Author:** [@Ernesto](https://forums.digi.com/u/Ernesto)\ **Replies:** 1\ **Last updated:** [April 19, 2022, 9:40pm UTC](https://forums.digi.com/t/does-anyone-know-how-to-nat-on-a-ix20/23048 "2022-04-19T21:40:45Z")
I want to know if it’s possible to configure source NAT over VPN in a Site to Site? I need to NAT a network that already exists in my destination --- ## [PAT entry from Inside to outside](https://forums.digi.com/t/pat-entry-from-inside-to-outside/21974)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 0\ **Last updated:** [November 6, 2020, 3:56am UTC](https://forums.digi.com/t/pat-entry-from-inside-to-outside/21974 "2020-11-06T03:56:38Z")
Hi Guys: We have a WR21 in port isolate mode. Eth1 is the Internal network and Eth0 is the Internet via an ISP fiber or ADSL router. We are using GPRS as backup. Eth0 is in DHCP mode so it picks up an ip address from t… --- ## [Does anyone know how to get RTSP working on a WR21](https://forums.digi.com/t/does-anyone-know-how-to-get-rtsp-working-on-a-wr21/21882)
**Author:** [@dbweiner](https://forums.digi.com/u/dbweiner)\ **Replies:** 4\ **Last updated:** [November 3, 2020, 2:03pm UTC](https://forums.digi.com/t/does-anyone-know-how-to-get-rtsp-working-on-a-wr21/21882 "2020-11-03T14:03:35Z")
I have the port forwarding set up to pass port 554 our to Ethernet 1. External Min Port: 554 External Max Port:554 Forward to Internal IP Address:192.168.69.101 Forward to Internal Port: 554 I also have a firewall rul… --- ## [Remote Management with a Private APN](https://forums.digi.com/t/remote-management-with-a-private-apn/21739)
**Author:** [@hernandez](https://forums.digi.com/u/hernandez)\ **Replies:** 1\ **Last updated:** [September 15, 2020, 3:48am UTC](https://forums.digi.com/t/remote-management-with-a-private-apn/21739 "2020-09-15T03:48:16Z")
Hello. I will try to exemplify the topology. LAN(192.168.100.0/24)—\>FW\<—VPN—\>APN(10.0.80.0/21)\<—Digi WR11/31—\>192.168.150.0/24 I want to manage my Digi WR11 from a PC on the 192.168.100.0/24 network. I have a VPN fro… --- ## [NAT between Celluar Interface and Ethernet Interface](https://forums.digi.com/t/nat-between-celluar-interface-and-ethernet-interface/21741)
**Author:** [@hernandez](https://forums.digi.com/u/hernandez)\ **Replies:** 1\ **Last updated:** [September 15, 2020, 2:39am UTC](https://forums.digi.com/t/nat-between-celluar-interface-and-ethernet-interface/21741 "2020-09-15T02:39:32Z")
Hello. I will try to exemplify the topology. LAN(192.168.100.0/24)–\>FW\<–VPN–\>APN(10.0.80.0/21)\<–Digi WR11–\>192.168.150.0/24 I want to manage my Digi WR11 from a PC on the 192.168.100.0/24 network. I have a VPN from a… --- ## [OpenVPN client and 1:1 NAT](https://forums.digi.com/t/openvpn-client-and-1-1-nat/21503)
**Author:** [@Automate](https://forums.digi.com/u/Automate)\ **Replies:** 1\ **Last updated:** [July 15, 2020, 5:18am UTC](https://forums.digi.com/t/openvpn-client-and-1-1-nat/21503 "2020-07-15T05:18:31Z")
I have a WR11XT that has a private external IP address. I need external IP packets reaching the WR11XT to be forwarded to a client on the LAN My plan is to configuring the WR11XT as an OpenVPN client with the following… --- ## [How to NAT - WR21](https://forums.digi.com/t/how-to-nat-wr21/20109)
**Author:** [@allan.ryan](https://forums.digi.com/u/allan.ryan)\ **Replies:** 1\ **Last updated:** [December 19, 2018, 5:13am UTC](https://forums.digi.com/t/how-to-nat-wr21/20109 "2018-12-19T05:13:38Z")
Dear Digi, I’m not sure if NAT is the correct term, but I would like to translate IP addresses. i.e. if I send a ping request through the modem to 10.1.0.1, I want the modem to translate that address so the ping reques… --- ## [Digi Transport WR44: Can you set NAT on a GRE tunnel interface?](https://forums.digi.com/t/digi-transport-wr44-can-you-set-nat-on-a-gre-tunnel-interface/18033)
**Author:** [@alwayson](https://forums.digi.com/u/alwayson)\ **Replies:** 3\ **Last updated:** [February 21, 2017, 9:59am UTC](https://forums.digi.com/t/digi-transport-wr44-can-you-set-nat-on-a-gre-tunnel-interface/18033 "2017-02-21T09:59:31Z")
I have two ethernet interfaces, eth0 traffic will be routed through the cellular WAN, eth1 traffic will be routed through a GRE tunnel carried over the Cellular connection. Can I configure the GRE tunnel interface with N… --- ## [Unable to disable NAT for Mobile interface in WR21](https://forums.digi.com/t/unable-to-disable-nat-for-mobile-interface-in-wr21/17630)
**Author:** [@VilleDM](https://forums.digi.com/u/VilleDM)\ **Replies:** 2\ **Last updated:** [November 29, 2016, 3:43pm UTC](https://forums.digi.com/t/unable-to-disable-nat-for-mobile-interface-in-wr21/17630 "2016-11-29T15:43:50Z")
It seems that NAT is still operational though I disabled it from the Interface settings: ‘Mobile network settings’ -\> ‘Enable NAT on this interface’ -\> checkbox cleared. What might be reason that NAT is still working? --- ## [NAT on the Digi ME](https://forums.digi.com/t/nat-on-the-digi-me/3927)
**Author:** [@rxd36](https://forums.digi.com/u/rxd36)\ **Replies:** 8\ **Last updated:** [July 10, 2006, 5:27pm UTC](https://forums.digi.com/t/nat-on-the-digi-me/3927 "2006-07-10T17:27:29Z")
How and when can NAT be used on the ME?? Has anyone here used this feature? I need to connect both the serial and Ethernet side with Layer 3 connectivity and was hoping this could acomplish it.