# \#nd

**URL:** https://forums.digi.com/tag/nd/638.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [Xbee S2C ATND format](https://forums.digi.com/t/xbee-s2c-atnd-format/23039)

<div class="topic-metadata">

**Author:** [@rpressley](https://forums.digi.com/u/rpressley)\
**Replies:** 1\
**Last updated:** [April 12, 2022, 10:48am UTC](https://forums.digi.com/t/xbee-s2c-atnd-format/23039 "2022-04-12T10:48:49Z")

</div>

I’m trying to find the correct format for the returned data from a network discovery command ATND. In the PDF 90001506.pdf (which I think is the right one for a S2C), The first element says to be SH, the first parameter …

---

## [XBee Series 3 ND Timeout Issue?](https://forums.digi.com/t/xbee-series-3-nd-timeout-issue/22721)

<div class="topic-metadata">

**Author:** [@JonnyMac](https://forums.digi.com/u/JonnyMac)\
**Replies:** 2\
**Last updated:** [October 11, 2021, 11:37am UTC](https://forums.digi.com/t/xbee-series-3-nd-timeout-issue/22721 "2021-10-11T11:37:03Z")

</div>

I have my NT value set to 0x0A but the ND acknowledge message – which usually comes at the end of the ND window – never arrives. The maximum NT value is 0xFC which means this ack message should show up in about 25 second…

---

## [XBee S2C at a Grove development kit doesn't request data.](https://forums.digi.com/t/xbee-s2c-at-a-grove-development-kit-doesnt-request-data/21485)

<div class="topic-metadata">

**Author:** [@414184](https://forums.digi.com/u/414184)\
**Replies:** 2\
**Last updated:** [July 2, 2020, 8:47am UTC](https://forums.digi.com/t/xbee-s2c-at-a-grove-development-kit-doesnt-request-data/21485 "2020-07-02T08:47:13Z")

</div>

Hello, i recently started using Xbee’s. I got two Xbees. Lets call them Xbee A (Connected to PC) and Xbee B (Remote). My goal is to measure the RSSI value at Xbee A received from Xbee B for localization goals. This wo…

---

## [Possible to check status of ND?](https://forums.digi.com/t/possible-to-check-status-of-nd/18604)

<div class="topic-metadata">

**Author:** [@bremenpl](https://forums.digi.com/u/bremenpl)\
**Replies:** 11\
**Last updated:** [August 10, 2017, 3:41pm UTC](https://forums.digi.com/t/possible-to-check-status-of-nd/18604 "2017-08-10T15:41:15Z")

</div>

Hello there, When I issue the ND command, the Xbee module becomes unresponsive for the time of NT. I need to wait for ND answers with nodes found. But lets say the ND command is ongoing and the master MCU just went ON a…

---

## [Point me to frame format(s) for ATND command in API mode?](https://forums.digi.com/t/point-me-to-frame-format-s-for-atnd-command-in-api-mode/17049)

<div class="topic-metadata">

**Author:** [@circularfire](https://forums.digi.com/u/circularfire)\
**Replies:** 1\
**Last updated:** [July 18, 2016, 9:18am UTC](https://forums.digi.com/t/point-me-to-frame-format-s-for-atnd-command-in-api-mode/17049 "2016-07-18T09:18:46Z")

</div>

I’ve been trying to figure out what responses come back from ATND in API mode, and the frame format(s). I found plenty for ‘ATND’ in transparent mode, but I can’t seem to come up with the right search keywords to get de…

---

## [Unexpected additional data from Node Discover (AT Mode)](https://forums.digi.com/t/unexpected-additional-data-from-node-discover-at-mode/15541)

<div class="topic-metadata">

**Author:** [@SkyDemon](https://forums.digi.com/u/SkyDemon)\
**Replies:** 2\
**Last updated:** [October 9, 2015, 9:21am UTC](https://forums.digi.com/t/unexpected-additional-data-from-node-discover-at-mode/15541 "2015-10-09T09:21:25Z")

</div>

User Guide for ZigBee RF Modules (90000976 W) appears to be applicable to my S2 - ZigBee Coordinator AT version 20A7. It gives the response to the ‘ND’ command as: SH SL NI (Variable length) PARENT\_NETWORK ADDRESS (…

---

## [Error 1 return on command ATND](https://forums.digi.com/t/error-1-return-on-command-atnd/15263)

<div class="topic-metadata">

**Author:** [@froggie\_59](https://forums.digi.com/u/froggie_59)\
**Replies:** 2\
**Last updated:** [August 12, 2015, 12:07pm UTC](https://forums.digi.com/t/error-1-return-on-command-atnd/15263 "2015-08-12T12:07:11Z")

</div>

Hi I am using Xbees serie2 connected in API and it works pretty well. There is an issue I cannot solve. I receive most of the time 1 as a feedback to ATND command to the coordinator. I did reset the network several time…

---

## [Node discovery API response format](https://forums.digi.com/t/node-discovery-api-response-format/14617)

<div class="topic-metadata">

**Author:** [@wz2b](https://forums.digi.com/u/wz2b)\
**Replies:** 4\
**Last updated:** [March 31, 2015, 1:15pm UTC](https://forums.digi.com/t/node-discovery-api-response-format/14617 "2015-03-31T13:15:05Z")

</div>

I made an xbee java library of my own, in part so that I could separate out xbee from non-xbee licensing issues; and in part because I wanted to have a library in maven with essentially zero external dependencies. It’s …

---

## [Node Discovery. What is the deafult content in the serial response?](https://forums.digi.com/t/node-discovery-what-is-the-deafult-content-in-the-serial-response/12570)

<div class="topic-metadata">

**Author:** [@maurolarrat](https://forums.digi.com/u/maurolarrat)\
**Replies:** 3\
**Last updated:** [March 30, 2015, 4:26am UTC](https://forums.digi.com/t/node-discovery-what-is-the-deafult-content-in-the-serial-response/12570 "2015-03-30T04:26:18Z")

</div>

Hello Friends. First: I have looked in this forum before asking and couldn’t find any topic about my question. In the AT mode, what is the default format for the AT ND command response? Here http://ftp1.digi.com/suppo…

---

## [xBee API Response to ND command contains extra undefined characters](https://forums.digi.com/t/xbee-api-response-to-nd-command-contains-extra-undefined-characters/11744)

<div class="topic-metadata">

**Author:** [@dvorreiter](https://forums.digi.com/u/dvorreiter)\
**Replies:** 5\
**Last updated:** [November 3, 2014, 10:06am UTC](https://forums.digi.com/t/xbee-api-response-to-nd-command-contains-extra-undefined-characters/11744 "2014-11-03T10:06:16Z")

</div>

Hello I am using the xBee series 2 devices in API mode. When I send out the ND command to the local device , I correctly receive information from all devices on the network. However in the response I also receive two…

---

## [NO command reverts to "3" even if I write 2](https://forums.digi.com/t/no-command-reverts-to-3-even-if-i-write-2/13368)

<div class="topic-metadata">

**Author:** [@carollaf](https://forums.digi.com/u/carollaf)\
**Replies:** 1\
**Last updated:** [August 18, 2014, 3:30pm UTC](https://forums.digi.com/t/no-command-reverts-to-3-even-if-i-write-2/13368 "2014-08-18T15:30:00Z")

</div>

I’m using a mesh network of 1 coordinator (21A7), a few routers (23A7), and some end devices (29A7). I’m in API mode for communicating to the radios in the field. When I issued an API mode ND command, there was no resp…

---

## [ND command for testing](https://forums.digi.com/t/nd-command-for-testing/12927)

<div class="topic-metadata">

**Author:** [@vasama](https://forums.digi.com/u/vasama)\
**Replies:** 1\
**Last updated:** [May 7, 2014, 2:55pm UTC](https://forums.digi.com/t/nd-command-for-testing/12927 "2014-05-07T14:55:15Z")

</div>

Thanks. I’ll do this test. I keep you informed… By the way, according my test, the only way for “instantaneous” reception is if I send the same API frame from the X-CTU soft (whatever the module I pluggued). Is there a…

---

## [when I send an API ND command to a remote endpoint I get ???](https://forums.digi.com/t/when-i-send-an-api-nd-command-to-a-remote-endpoint-i-get/12577)

<div class="topic-metadata">

**Author:** [@Bob\_Arnold](https://forums.digi.com/u/Bob_Arnold)\
**Replies:** 1\
**Last updated:** [May 7, 2014, 1:20pm UTC](https://forums.digi.com/t/when-i-send-an-api-nd-command-to-a-remote-endpoint-i-get/12577 "2014-05-07T13:20:00Z")

</div>

When I send an API ND command from a VB program using the following packet; 7E 00 05 08 01 4E 44 00 64 I get; 7E053F14E4413F Its a response – but not as I know it. Neither the checksum “3F” or command length “05” are…

---

## [API remote AT ND command](https://forums.digi.com/t/api-remote-at-nd-command/12636)

<div class="topic-metadata">

**Author:** [@maurolarrat](https://forums.digi.com/u/maurolarrat)\
**Replies:** 1\
**Last updated:** [May 6, 2014, 3:19pm UTC](https://forums.digi.com/t/api-remote-at-nd-command/12636 "2014-05-06T15:19:27Z")

</div>

I made a frame for remote AT ND command (using the very usefull DIGI API Maker) as follows: 7E 00 0F 17 01 00 00 00 00 00 00 FF FF FF FF 00 4E 44 59 which in words, means: 7E start delimiter. 00 0F lenght. 17 tells …

---

## [How to wait for and read ND response in Python?](https://forums.digi.com/t/how-to-wait-for-and-read-nd-response-in-python/12017)

<div class="topic-metadata">

**Author:** [@alias\_neo](https://forums.digi.com/u/alias_neo)\
**Replies:** 2\
**Last updated:** [October 18, 2013, 6:10am UTC](https://forums.digi.com/t/how-to-wait-for-and-read-nd-response-in-python/12017 "2013-10-18T06:10:44Z")

</div>

Hi. I’m working on an IoT project at home, with the intention of having a dynamic network. As devices are added and removed from the network, the hub, the database of devices on the network is updated. So, I intend to h…
