# \#overflow
**URL:** https://forums.digi.com/tag/overflow/1436.md
[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)
---
## [Stack Trace Overflow](https://forums.digi.com/t/stack-trace-overflow/14714)
**Author:** [@edg10](https://forums.digi.com/u/edg10)\
**Replies:** 2\
**Last updated:** [September 25, 2025, 11:20am UTC](https://forums.digi.com/t/stack-trace-overflow/14714 "2025-09-25T11:20:57Z")
I’m maintaining some code on a BL2600 board and recently saw an unhandled RST38 error while in debug mode. From what I found on the internet this normally means writing outside an array boundary or a stack overflow. I ma…
---
## [Xbee does not work well and overflow occurs at 50 times per second (sending 64 bytes)](https://forums.digi.com/t/xbee-does-not-work-well-and-overflow-occurs-at-50-times-per-second-sending-64-bytes/18243)
**Author:** [@Luis\_Pastor](https://forums.digi.com/u/Luis_Pastor)\
**Replies:** 1\
**Last updated:** [April 12, 2017, 11:28am UTC](https://forums.digi.com/t/xbee-does-not-work-well-and-overflow-occurs-at-50-times-per-second-sending-64-bytes/18243 "2017-04-12T11:28:08Z")
What XBee product are you working with? I am working with XBee ProS2B (Product family XBP24BZ7) What firmware version is installed? The firmware installed is 20A7. Rate115200 bit / second Have you enabled and connec…
---
## [Xbee has problems with overflow?](https://forums.digi.com/t/xbee-has-problems-with-overflow/18239)
**Author:** [@Luis\_Pastor](https://forums.digi.com/u/Luis_Pastor)\
**Replies:** 3\
**Last updated:** [April 12, 2017, 10:39am UTC](https://forums.digi.com/t/xbee-has-problems-with-overflow/18239 "2017-04-12T10:39:32Z")
Xbee has problems with overflow. I have tested n options and the problem is not solved. I try to transmit 63 bytes every 20 ms at 115200 bit / second and half the information is lost in one minute of transmission. That d…
---
## [XBee Series 2 module enter undefined state/freeze](https://forums.digi.com/t/xbee-series-2-module-enter-undefined-state-freeze/14130)
**Author:** [@JosteinO](https://forums.digi.com/u/JosteinO)\
**Replies:** 3\
**Last updated:** [January 21, 2015, 3:04pm UTC](https://forums.digi.com/t/xbee-series-2-module-enter-undefined-state-freeze/14130 "2015-01-21T15:04:21Z")
I have serveral XBee modules in a low power sensor design based on the following setup: XBEE hardware version: 0x1944 XBee firmware: 0x288c (sleeping end-node, AT mode) SM: 5 SO: 0 SP: 500\*10mS ST: 300mS SN: 10 (t…
---
## [mstimer is 8bytes and wraps around about every 49 days](https://forums.digi.com/t/mstimer-is-8bytes-and-wraps-around-about-every-49-days/13177)
**Author:** [@smultita](https://forums.digi.com/u/smultita)\
**Replies:** 3\
**Last updated:** [July 9, 2014, 8:12am UTC](https://forums.digi.com/t/mstimer-is-8bytes-and-wraps-around-about-every-49-days/13177 "2014-07-09T08:12:48Z")
We use Rabbit RCM3750 mstimer is 8 bytes and wraps around every 49 days These are specific dates/times, e,g,: 2013-10-15 2013-08-27 2013-07-08 2013-05-19 2013-03-26 2013-02-04 2012-12-16 which gives a problem in our …