# \#payload **URL:** https://forums.digi.com/tag/payload/637.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Interfacing with Sengled Smart Bulb](https://forums.digi.com/t/interfacing-with-sengled-smart-bulb/30322)
**Author:** [@galoddo](https://forums.digi.com/u/galoddo)\ **Replies:** 1\ **Last updated:** [April 1, 2024, 2:35pm UTC](https://forums.digi.com/t/interfacing-with-sengled-smart-bulb/30322 "2024-04-01T14:35:07Z")
Hello, I am currently attempting to control a Sengled Smart Bulb via an XBee S2C. I have been able to find the correct frames to turn the bulb on/off and such. Though now I am running into a issue where every minute exac… --- ## [DigiMesh 2.4 TH MAX payload Size](https://forums.digi.com/t/digimesh-2-4-th-max-payload-size/22408)
**Author:** [@thiagoalberto](https://forums.digi.com/u/thiagoalberto)\ **Replies:** 1\ **Last updated:** [May 17, 2021, 10:10pm UTC](https://forums.digi.com/t/digimesh-2-4-th-max-payload-size/22408 "2021-05-17T22:10:54Z")
Hello Digi Forum. I’m working on a project with an S2C device set as DigiMesh 2.4 TH, firmware 9002. As mentioned in this post (http://cms.digi.com/support/forum/62161/what-is-xbee-s2c-digimesh-maximum-payload-size) bu… --- ## [incoming zcl payload](https://forums.digi.com/t/incoming-zcl-payload/21608)
**Author:** [@gustcool2](https://forums.digi.com/u/gustcool2)\ **Replies:** 1\ **Last updated:** [August 3, 2020, 4:47am UTC](https://forums.digi.com/t/incoming-zcl-payload/21608 "2020-08-03T04:47:31Z")
hi I connected a smart energy meter of other manufacturer to xbee. And I received the following data ====== data ====== 7e start delimiter 0030 len 91 frame type 000d6f0013a039e3 64bit-addr ec77 16bit-addr 01 sr… --- ## [Help me interpret zcl payload!!](https://forums.digi.com/t/help-me-interpret-zcl-payload/21609)
**Author:** [@gustcool2](https://forums.digi.com/u/gustcool2)\ **Replies:** 1\ **Last updated:** [August 3, 2020, 4:46am UTC](https://forums.digi.com/t/help-me-interpret-zcl-payload/21609 "2020-08-03T04:46:08Z")
Hi I am studying zigbee with xbee. I connected smart energy meter of other vendor(ezex) to xbee. I received following data. ====== data ====== 7E #start delimiter 00 30 #length 91 #frame type 00 0D 6F 00 13 A0 39… --- ## [help!! interpret zcl payload](https://forums.digi.com/t/help-interpret-zcl-payload/21610)
**Author:** [@gustcool2](https://forums.digi.com/u/gustcool2)\ **Replies:** 1\ **Last updated:** [August 3, 2020, 4:45am UTC](https://forums.digi.com/t/help-interpret-zcl-payload/21610 "2020-08-03T04:45:05Z")
Hi I am studying zigbee with xbee. I connected smart energy meter of other vendor(ezex) to xbee. I received following data. ====== data ====== 7E #start delimiter 00 30 #length 91 #frame type 00 0D 6F 00 13 A0 39… --- ## [Micropython - TCP Header - Maximum Segment Size - MSS](https://forums.digi.com/t/micropython-tcp-header-maximum-segment-size-mss/21411)
**Author:** [@gopinaath](https://forums.digi.com/u/gopinaath)\ **Replies:** 0\ **Last updated:** [May 28, 2020, 9:39am UTC](https://forums.digi.com/t/micropython-tcp-header-maximum-segment-size-mss/21411 "2020-05-28T09:39:40Z")
Trying to communicate using MQTT using Micropython on Xbee3 Cellular Modem. It appears that Micropython’s usocket library sends with TCP Header Option- Maximum Segment Size(MSS) that is very low (less than 50). Such lo… --- ## [What is the maximum data size that can be sent from base gnss module to Rover module using xbee 868 sx?](https://forums.digi.com/t/what-is-the-maximum-data-size-that-can-be-sent-from-base-gnss-module-to-rover-module-using-xbee-868-sx/21326)
**Author:** [@Balkis\_mahammad](https://forums.digi.com/u/Balkis_mahammad)\ **Replies:** 1\ **Last updated:** [April 29, 2020, 1:37pm UTC](https://forums.digi.com/t/what-is-the-maximum-data-size-that-can-be-sent-from-base-gnss-module-to-rover-module-using-xbee-868-sx/21326 "2020-04-29T13:37:29Z")
And required data rate for the same base -rover application? --- ## [Documentation of Payload formate for XBee module](https://forums.digi.com/t/documentation-of-payload-formate-for-xbee-module/20645)
**Author:** [@montup](https://forums.digi.com/u/montup)\ **Replies:** 0\ **Last updated:** [July 19, 2019, 10:49am UTC](https://forums.digi.com/t/documentation-of-payload-formate-for-xbee-module/20645 "2019-07-19T10:49:20Z")
Hi, I am using XBee s2c module and I have done basic communication with Sengled Smart bulb, I was able to control basic functions like “on/off” and “change brightness” using below link. https://gist.github.com/bgentry/… --- ## [Max RF-data I can transmit using XBee 868 LP API mode - Digimesh](https://forums.digi.com/t/max-rf-data-i-can-transmit-using-xbee-868-lp-api-mode-digimesh/19702)
**Author:** [@fredpeer](https://forums.digi.com/u/fredpeer)\ **Replies:** 0\ **Last updated:** [July 10, 2018, 8:29am UTC](https://forums.digi.com/t/max-rf-data-i-can-transmit-using-xbee-868-lp-api-mode-digimesh/19702 "2018-07-10T08:29:02Z")
The NP command in XCTU reports that the maximum payload size is 100 bytes for the XBee 868 LP. When in API mode, I can send a package with a max RF-data of 95 bytes, and I receive a “succes” message. When the RF-data i… --- ## [Are data payload packets embedded inside a ZBTxRequest packet? i.e. a packet inside a packet?](https://forums.digi.com/t/are-data-payload-packets-embedded-inside-a-zbtxrequest-packet-i-e-a-packet-inside-a-packet/14166)
**Author:** [@rktect](https://forums.digi.com/u/rktect)\ **Replies:** 1\ **Last updated:** [January 14, 2015, 2:38pm UTC](https://forums.digi.com/t/are-data-payload-packets-embedded-inside-a-zbtxrequest-packet-i-e-a-packet-inside-a-packet/14166 "2015-01-14T14:38:20Z")
I am sending a 40-byte payload from an S2 Xbee (XB24-ZB, ZigBee End Device AT, firmware 28A7) to an Pro S2B (XBP24BZ7, ZigBee Coordinator API, firmware 21A7) and I inconsistently receive either a 71 or 72 byte length fr… --- ## [Does using API mode 2 affect the maximum payload size?](https://forums.digi.com/t/does-using-api-mode-2-affect-the-maximum-payload-size/13106)
**Author:** [@Shannon](https://forums.digi.com/u/Shannon)\ **Replies:** 2\ **Last updated:** [June 9, 2014, 11:15pm UTC](https://forums.digi.com/t/does-using-api-mode-2-affect-the-maximum-payload-size/13106 "2014-06-09T23:15:39Z")
If operating in API mode and using escaped characters (AP=2), is the maximum payload size reduced? In other words, if my un-escaped message fills the maximum payload (ATNP = 84), but after applying the escaping it excee… --- ## [Transmitting a Payload Larger than 32-bits](https://forums.digi.com/t/transmitting-a-payload-larger-than-32-bits/12461)
**Author:** [@casey2542](https://forums.digi.com/u/casey2542)\ **Replies:** 1\ **Last updated:** [May 9, 2014, 1:39pm UTC](https://forums.digi.com/t/transmitting-a-payload-larger-than-32-bits/12461 "2014-05-09T13:39:08Z")
Hello, This is likely more of a coding question than anything. Any help would be appreciated! I’m using the XBEE Pro 900hp modules to take and send environmental measurements to a main base station. I need to send a … --- ## [payload changes when sending uint8\_t of value 17 or 19](https://forums.digi.com/t/payload-changes-when-sending-uint8-t-of-value-17-or-19/12680)
**Author:** [@concyse](https://forums.digi.com/u/concyse)\ **Replies:** 2\ **Last updated:** [March 25, 2014, 11:47pm UTC](https://forums.digi.com/t/payload-changes-when-sending-uint8-t-of-value-17-or-19/12680 "2014-03-25T23:47:56Z")
Below is a snippet of code. I’m using a simple uint8\_t to hold a ‘counter’, so I can visualize every frame on the receiving end (Coordinator). I increment a ‘counter’ value from 0 to 100, then back to 0 to send as part… --- ## [Is it possible to reduce the maximum packet size of Xbee 802.15.4 only reducing the maximum payload size?](https://forums.digi.com/t/is-it-possible-to-reduce-the-maximum-packet-size-of-xbee-802-15-4-only-reducing-the-maximum-payload-size/12066)
**Author:** [@wjunior](https://forums.digi.com/u/wjunior)\ **Replies:** 1\ **Last updated:** [October 18, 2013, 8:47am UTC](https://forums.digi.com/t/is-it-possible-to-reduce-the-maximum-packet-size-of-xbee-802-15-4-only-reducing-the-maximum-payload-size/12066 "2013-10-18T08:47:12Z")
I am doing a research about the influence of the maximum packet size on the performance of a 802.15.4 network. Is it possible to reduce the maximum packet size of Xbee 802.15.4 only reducing the maximum payload size? --- ## [XStick® 802.15.4 & XStick® ZB payload size! Help!!](https://forums.digi.com/t/xstick-802-15-4-xstick-zb-payload-size-help/11740)
**Author:** [@Andreina](https://forums.digi.com/u/Andreina)\ **Replies:** 3\ **Last updated:** [July 22, 2013, 11:34pm UTC](https://forums.digi.com/t/xstick-802-15-4-xstick-zb-payload-size-help/11740 "2013-07-22T23:34:26Z")
Hello! I’m new with Zigbee, so I will be doing some basic questions I want to build a small star network (one coordinator and 5 slaves). I need to send a large message that in fact I have to split into several messages …