# \#programming **URL:** https://forums.digi.com/tag/programming/148.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Unable to connect to XBee-PRO 900HP locally but can remotely](https://forums.digi.com/t/unable-to-connect-to-xbee-pro-900hp-locally-but-can-remotely/22722)
**Author:** [@jaray](https://forums.digi.com/u/jaray)\ **Replies:** 1\ **Last updated:** [October 7, 2021, 10:00am UTC](https://forums.digi.com/t/unable-to-connect-to-xbee-pro-900hp-locally-but-can-remotely/22722 "2021-10-07T10:00:58Z")
I have several XBee-PRO 900HP modules that have previously be written to be on the same network. I’ve been having some unrelated issues and wanted to plug each one in individually to rewrite settings. A couple of these… --- ## [Does the ftdi usb to serial converter on the market need a BAT54 diode for RCM32xx programming?](https://forums.digi.com/t/does-the-ftdi-usb-to-serial-converter-on-the-market-need-a-bat54-diode-for-rcm32xx-programming/22364)
**Author:** [@Hammed](https://forums.digi.com/u/Hammed)\ **Replies:** 3\ **Last updated:** [April 23, 2021, 2:12pm UTC](https://forums.digi.com/t/does-the-ftdi-usb-to-serial-converter-on-the-market-need-a-bat54-diode-for-rcm32xx-programming/22364 "2021-04-23T14:12:39Z")
--- ## [Running NeoPixel on XBee3 with MicroPython](https://forums.digi.com/t/running-neopixel-on-xbee3-with-micropython/22227)
**Author:** [@kapetan](https://forums.digi.com/u/kapetan)\ **Replies:** 4\ **Last updated:** [March 1, 2021, 7:43am UTC](https://forums.digi.com/t/running-neopixel-on-xbee3-with-micropython/22227 "2021-03-01T07:43:01Z")
Hi, Is it possible to run NeoPixel from MicroPython? I was not able to find any compatible drivers (there were some who relied on SPI which the XBee3 doesn’t seem to support). --- ## [Can I get help getting started with RCM5700 Standard Development Kit?](https://forums.digi.com/t/can-i-get-help-getting-started-with-rcm5700-standard-development-kit/22187)
**Author:** [@jcverive](https://forums.digi.com/u/jcverive)\ **Replies:** 1\ **Last updated:** [February 12, 2021, 11:52pm UTC](https://forums.digi.com/t/can-i-get-help-getting-started-with-rcm5700-standard-development-kit/22187 "2021-02-12T23:52:16Z")
I have a RCM5700 Standard Development Kit with a MiniCore RCM5700, Interface Board, Prototyping Board, Digital I/O Demo Board, and RS232/485 Board. I have followed the instructions in the Getting Started guide, and am no… --- ## [Programming an XBee without a dev board??](https://forums.digi.com/t/programming-an-xbee-without-a-dev-board/21885)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 13\ **Last updated:** [October 12, 2020, 10:48am UTC](https://forums.digi.com/t/programming-an-xbee-without-a-dev-board/21885 "2020-10-12T10:48:15Z")
Hello, I have developed a PCB with an XBee3 MMT chip soldered directly onto the PCB. Is there a way to program the XBee3 MMT chip without a development board? I didn’t think about how I would program the chip until I ha… --- ## [Do you think it is possible / how might make XBee(s) self-configure based on what they see in the system?](https://forums.digi.com/t/do-you-think-it-is-possible-how-might-make-xbee-s-self-configure-based-on-what-they-see-in-the-system/21531)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 3\ **Last updated:** [July 29, 2020, 3:06pm UTC](https://forums.digi.com/t/do-you-think-it-is-possible-how-might-make-xbee-s-self-configure-based-on-what-they-see-in-the-system/21531 "2020-07-29T15:06:15Z")
So I have a home project I am working on. I will describe my project and then get to the question. I have a network of 10 XBee’s successfully communicating and performing the same basic functions but in a position depen… --- ## [XBee3: if you configure the Node Identifier (NI) in the XCTU configuration tool.. and then...](https://forums.digi.com/t/xbee3-if-you-configure-the-node-identifier-ni-in-the-xctu-configuration-tool-and-then/21572)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 4\ **Last updated:** [July 22, 2020, 12:26pm UTC](https://forums.digi.com/t/xbee3-if-you-configure-the-node-identifier-ni-in-the-xctu-configuration-tool-and-then/21572 "2020-07-22T12:26:50Z")
XBee3: if you configure the Node Identifier (NI) in the XCTU configuration tool… and then in your program take that device and set\_node\_id() to some different NI… is that permanent or only during the program running time… --- ## [XBee 3: I/O expander MCP23017 using Micropython I2C interface - importing libraries?](https://forums.digi.com/t/xbee-3-i-o-expander-mcp23017-using-micropython-i2c-interface-importing-libraries/21564)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 1\ **Last updated:** [July 20, 2020, 4:33am UTC](https://forums.digi.com/t/xbee-3-i-o-expander-mcp23017-using-micropython-i2c-interface-importing-libraries/21564 "2020-07-20T04:33:47Z")
does Python XBee support have libraries for utiziling the MCP23017 I2C I/O port expander. I’m assuming one would use Micropython I2C to setup the I/O port expander onto the I2C bus and then have I2C sensors plugged into … --- ## [Explain: Difference between set.io.configure and set.dio.value?](https://forums.digi.com/t/explain-difference-between-set-io-configure-and-set-dio-value/21509)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 0\ **Last updated:** [June 29, 2020, 1:11pm UTC](https://forums.digi.com/t/explain-difference-between-set-io-configure-and-set-dio-value/21509 "2020-06-29T13:11:39Z")
When dealing with manipulating pins often in a program I was told that “I shouldn’t use the configuration method frequently… only to configure an IO port initially. I should use a set method to change the IO port often.”… --- ## [How and where can i get the debugger to program XBee S2C with codewarrior?](https://forums.digi.com/t/how-and-where-can-i-get-the-debugger-to-program-xbee-s2c-with-codewarrior/18474)
**Author:** [@apple0](https://forums.digi.com/u/apple0)\ **Replies:** 7\ **Last updated:** [June 29, 2020, 12:37am UTC](https://forums.digi.com/t/how-and-where-can-i-get-the-debugger-to-program-xbee-s2c-with-codewarrior/18474 "2020-06-29T00:37:20Z")
Hello, I have a Programmable XBee ZB module and a interface development tools USB XBeePro. I’ve installed XCTU and CodeWarrior. To flash the program, it tells me i need a debugger to connect PC and the board. Could som… --- ## [XBee 3 modules no longer recognized by XCTU](https://forums.digi.com/t/xbee-3-modules-no-longer-recognized-by-xctu/21429)
**Author:** [@tw.lewis](https://forums.digi.com/u/tw.lewis)\ **Replies:** 6\ **Last updated:** [June 25, 2020, 10:26am UTC](https://forums.digi.com/t/xbee-3-modules-no-longer-recognized-by-xctu/21429 "2020-06-25T10:26:21Z")
I have two XBee3 SMT Grove Development boards. When I run XCTU, they don’t show up. I suspect that they are running MicroPython flash programs and won’t connect to the PC. Is there a ‘master reset’ or some other way to s… --- ## [Why is XBEE3 continuously resetting after programming?](https://forums.digi.com/t/why-is-xbee3-continuously-resetting-after-programming/21448)
**Author:** [@MSGC](https://forums.digi.com/u/MSGC)\ **Replies:** 1\ **Last updated:** [June 10, 2020, 8:52am UTC](https://forums.digi.com/t/why-is-xbee3-continuously-resetting-after-programming/21448 "2020-06-10T08:52:53Z")
We have developed a custom battery powered board that we are programming with the XBEE SMT Grove Development Board. After programming the XBEE3 resets about every 10-15 seconds. When connected to the XBEE SMT Grove Dev… --- ## [Programmer Needed for Rabbit RCM3110](https://forums.digi.com/t/programmer-needed-for-rabbit-rcm3110/20932)
**Author:** [@MM2](https://forums.digi.com/u/MM2)\ **Replies:** 4\ **Last updated:** [December 13, 2019, 8:28am UTC](https://forums.digi.com/t/programmer-needed-for-rabbit-rcm3110/20932 "2019-12-13T08:28:39Z")
We are looking for programmer to help us support existing products. We are using a Rabbit RCM3110 core module. We have six standard products that utilize the Rabbit. We are looking to develop long term support for our pr… --- ## [How to search and add end device to network without using X-CTU software?](https://forums.digi.com/t/how-to-search-and-add-end-device-to-network-without-using-x-ctu-software/20587)
**Author:** [@montup](https://forums.digi.com/u/montup)\ **Replies:** 0\ **Last updated:** [June 26, 2019, 2:31am UTC](https://forums.digi.com/t/how-to-search-and-add-end-device-to-network-without-using-x-ctu-software/20587 "2019-06-26T02:31:43Z")
Hi, Recently, We have bought 4 Xbee module for our project, in which one of them will act as coordinator(connected to RPi 3)and the rest of three as the end device(connected to RPi zero). In future end device could be a… --- ## [Want to load program on Xbee3](https://forums.digi.com/t/want-to-load-program-on-xbee3/20300)
**Author:** [@brccd](https://forums.digi.com/u/brccd)\ **Replies:** 1\ **Last updated:** [March 5, 2019, 10:12am UTC](https://forums.digi.com/t/want-to-load-program-on-xbee3/20300 "2019-03-05T10:12:09Z")
Just got the Digi Xbee 3 mesh kit…so a newbie here! using XCTU got things setup…communication between units…got into the micro python window on one of the units. The question is: If you use micropython, make a program,… --- ## [And adapters for RF modules with 20 pin dip headers? How to connect to computer for programming?](https://forums.digi.com/t/and-adapters-for-rf-modules-with-20-pin-dip-headers-how-to-connect-to-computer-for-programming/20174)
**Author:** [@torriem](https://forums.digi.com/u/torriem)\ **Replies:** 0\ **Last updated:** [January 15, 2019, 8:21am UTC](https://forums.digi.com/t/and-adapters-for-rf-modules-with-20-pin-dip-headers-how-to-connect-to-computer-for-programming/20174 "2019-01-15T08:21:15Z")
I have some old 9xtend modules that I’d like to test to see if they are working. They have the 20 pin dip header on them. How do I connect these to a computer’s serial port so I can work with them from the the XCTU soft… --- ## [Programming Rabbit RCM6700 via Ethernet](https://forums.digi.com/t/programming-rabbit-rcm6700-via-ethernet/20113)
**Author:** [@john\_Mc](https://forums.digi.com/u/john_Mc)\ **Replies:** 1\ **Last updated:** [December 21, 2018, 7:09pm UTC](https://forums.digi.com/t/programming-rabbit-rcm6700-via-ethernet/20113 "2018-12-21T19:09:56Z")
Hello, Is it possible to program the Rabbit RCM6700 module via Ethernet? It would be to include the functionality in an application that uses TCP sockets to communicate between a PC and the Rabbit module (it is not for … --- ## [How to program Rabbit RCM6700 module via Ethernet?](https://forums.digi.com/t/how-to-program-rabbit-rcm6700-module-via-ethernet/20096)
**Author:** [@john\_Mc](https://forums.digi.com/u/john_Mc)\ **Replies:** 1\ **Last updated:** [December 21, 2018, 7:08pm UTC](https://forums.digi.com/t/how-to-program-rabbit-rcm6700-module-via-ethernet/20096 "2018-12-21T19:08:22Z")
Only using a PC and Rabbit, both with static IP (not for a server), would be to integrate in the firmware an option to program the Rabbit by TCP using sockets and sending a .bin file saved on the PC. Is it possible to pe… --- ## [Looking for wireless or USB compatible Relay Controllers](https://forums.digi.com/t/looking-for-wireless-or-usb-compatible-relay-controllers/19735)
**Author:** [@snacleb23](https://forums.digi.com/u/snacleb23)\ **Replies:** 0\ **Last updated:** [July 20, 2018, 8:37am UTC](https://forums.digi.com/t/looking-for-wireless-or-usb-compatible-relay-controllers/19735 "2018-07-20T08:37:05Z")
Hello, I am looking for Relay controller which is easy to use with Zigbee device or as well as USB devices. I want to use these relay with water pumps and while connected with wireless solution we want to connect these r… --- ## [There is no MicroPython REPL \[4\] option in XCTU](https://forums.digi.com/t/there-is-no-micropython-repl-4-option-in-xctu/18570)
**Author:** [@chasebrignac](https://forums.digi.com/u/chasebrignac)\ **Replies:** 2\ **Last updated:** [June 26, 2018, 11:33am UTC](https://forums.digi.com/t/there-is-no-micropython-repl-4-option-in-xctu/18570 "2018-06-26T11:33:30Z")
I want to use MicroPython on my cellular XBEE but when I follow the instructions by going to the XTCU and changing the API Enable Setting to MicroPython REPL \[4\], I find that the option is marked as NA \[4\], and when I tr… --- ## [XBee Channel Setting](https://forums.digi.com/t/xbee-channel-setting/19027)
**Author:** [@RogerHarrold](https://forums.digi.com/u/RogerHarrold)\ **Replies:** 1\ **Last updated:** [December 29, 2017, 10:30am UTC](https://forums.digi.com/t/xbee-channel-setting/19027 "2017-12-29T10:30:00Z")
I am a little confused about channel setting on an XBee Pro using AT commands. Available channels are shown as hexC to hex17, dec12 to dec23 I have seen websites where setting to, say, hexD is achieved by “ATCH D” fol… --- ## [Pickit3 Program Can Not Recognize Chip](https://forums.digi.com/t/pickit3-program-can-not-recognize-chip/18291)
**Author:** [@ling1995](https://forums.digi.com/u/ling1995)\ **Replies:** 2\ **Last updated:** [November 3, 2017, 9:16am UTC](https://forums.digi.com/t/pickit3-program-can-not-recognize-chip/18291 "2017-11-03T09:16:32Z")
Pickit3 program can’t recognize chip Hello,can anyone here help me out? The tip is given below: Target Device ID (0x0) is an Invalid Device ID. Please check your connections to the Target Device. Situations: It can … --- ## [Programming cable](https://forums.digi.com/t/programming-cable/18764)
**Author:** [@psevdo](https://forums.digi.com/u/psevdo)\ **Replies:** 6\ **Last updated:** [October 20, 2017, 1:08pm UTC](https://forums.digi.com/t/programming-cable/18764 "2017-10-20T13:08:15Z")
Hi. Sorry for my english. I need your help. I have Rabbit PK2200 device. And I need programming it by RS-232. But I haven’t programming cable. So I want to make it. I need pinout for it. --- ## [I need to erase the app off of my programmable XBee](https://forums.digi.com/t/i-need-to-erase-the-app-off-of-my-programmable-xbee/18619)
**Author:** [@RoboNerd](https://forums.digi.com/u/RoboNerd)\ **Replies:** 3\ **Last updated:** [August 9, 2017, 2:29pm UTC](https://forums.digi.com/t/i-need-to-erase-the-app-off-of-my-programmable-xbee/18619 "2017-08-09T14:29:53Z")
I need to know how to erase an app off of the program memory. I figured out how to access the bootloader menu again easily (shorting the DTR pin to ground in addition to performing the original method works 100% of the … --- ## [How do I write C code that talks to a XBee?](https://forums.digi.com/t/how-do-i-write-c-code-that-talks-to-a-xbee/18456)
**Author:** [@FlipFlop](https://forums.digi.com/u/FlipFlop)\ **Replies:** 7\ **Last updated:** [June 30, 2017, 11:20am UTC](https://forums.digi.com/t/how-do-i-write-c-code-that-talks-to-a-xbee/18456 "2017-06-30T11:20:33Z")
This is the first time I’ve ever worked with XBee and the Zigbee protocol. So far I’ve played around a little with the XCTU software to connect XBee’s to write to digital I/O pins and now I want to try writing C program… --- ## [Wireless Relay using Digital I/O Line Passing in AT mode?](https://forums.digi.com/t/wireless-relay-using-digital-i-o-line-passing-in-at-mode/18057)
**Author:** [@walte1fr](https://forums.digi.com/u/walte1fr)\ **Replies:** 1\ **Last updated:** [February 21, 2017, 11:18am UTC](https://forums.digi.com/t/wireless-relay-using-digital-i-o-line-passing-in-at-mode/18057 "2017-02-21T11:18:29Z")
Looking for programming help. I have 3 XBee pro S2C (lets call them G, H1, and H2 just for labeling) modules. I am looking for 1 input on “G” to be an output on the other 2 “H1, H2”. Also I would like 1 input on the 2 to… --- ## [socket programming in linux c](https://forums.digi.com/t/socket-programming-in-linux-c/17926)
**Author:** [@komal\_patil](https://forums.digi.com/u/komal_patil)\ **Replies:** 1\ **Last updated:** [January 23, 2017, 12:58pm UTC](https://forums.digi.com/t/socket-programming-in-linux-c/17926 "2017-01-23T12:58:37Z")
hello I have made a chat client in linux using socket, and i wish to destroy the connection completely. Following is the relevant portions of the code: #include #include #include #include #include #include #inclu… --- ## [On Which ide create code for programmable Xbee Module](https://forums.digi.com/t/on-which-ide-create-code-for-programmable-xbee-module/17016)
**Author:** [@ketankothari](https://forums.digi.com/u/ketankothari)\ **Replies:** 1\ **Last updated:** [July 3, 2016, 8:53pm UTC](https://forums.digi.com/t/on-which-ide-create-code-for-programmable-xbee-module/17016 "2016-07-03T20:53:37Z")
--- ## [XCTU problem with code](https://forums.digi.com/t/xctu-problem-with-code/15919)
**Author:** [@xd\_avid](https://forums.digi.com/u/xd_avid)\ **Replies:** 5\ **Last updated:** [March 11, 2016, 12:24am UTC](https://forums.digi.com/t/xctu-problem-with-code/15919 "2016-03-11T00:24:18Z")
Hi, I use this code and XCTU shows the action required message and I cant connect my xbee to xctu, I need set the blink program for connect the arduino to XCTU. How can i read the codes sended from my Raspberry? /\*\*\*\*\*\*… --- ## [back to bootloader menu](https://forums.digi.com/t/back-to-bootloader-menu/16265)
**Author:** [@xbeeElisa](https://forums.digi.com/u/xbeeElisa)\ **Replies:** 2\ **Last updated:** [February 15, 2016, 1:46am UTC](https://forums.digi.com/t/back-to-bootloader-menu/16265 "2016-02-15T01:46:44Z")
hi, i have one programmable module… i have send one .bin example programm (created with release in codewarrior) . and it is working good. but now, i can’t see anymore the type modem or the firmware and i try to restart… [Next page](https://forums.digi.com/tag/programming/148.md?match_all_tags=true&page=1&tags%5B%5D=programming)