# \#receive **URL:** https://forums.digi.com/tag/receive/1350.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [I cannot receive data packet by using XBee pro S3B.](https://forums.digi.com/t/i-cannot-receive-data-packet-by-using-xbee-pro-s3b/23153)
**Author:** [@Kyle\_case](https://forums.digi.com/u/Kyle_case)\ **Replies:** 1\ **Last updated:** [July 25, 2022, 11:25am UTC](https://forums.digi.com/t/i-cannot-receive-data-packet-by-using-xbee-pro-s3b/23153 "2022-07-25T11:25:14Z")
I am using XBee pro S3B with adapter for wireless communication. It worked fine before, however, suddenly I am not able to communicate each other. I usually send and receive data packet by python or C++. But now, I am mo… --- ## [Sleeping End device sometime does not received response send from co-ordinator.](https://forums.digi.com/t/sleeping-end-device-sometime-does-not-received-response-send-from-co-ordinator/22883)
**Author:** [@Sheetal\_Kasar](https://forums.digi.com/u/Sheetal_Kasar)\ **Replies:** 3\ **Last updated:** [January 7, 2022, 8:30am UTC](https://forums.digi.com/t/sleeping-end-device-sometime-does-not-received-response-send-from-co-ordinator/22883 "2022-01-07T08:30:37Z")
Hi I have design data monitoring system with data logging. I have made network of 8 transmitter(end device) which will send data to receiver(coordinator) after every one Minuit. In case of network issue, data will get … --- ## [Receiving multiple time the same frame with XBEE S2C](https://forums.digi.com/t/receiving-multiple-time-the-same-frame-with-xbee-s2c/22783)
**Author:** [@hmxbee](https://forums.digi.com/u/hmxbee)\ **Replies:** 3\ **Last updated:** [November 15, 2021, 11:23pm UTC](https://forums.digi.com/t/receiving-multiple-time-the-same-frame-with-xbee-s2c/22783 "2021-11-15T23:23:51Z")
Hello, I use two XBEE S2C (XB24CAUIT-001) in API mode to transmit data from one module to the other. I can correctly send and receive each frames but I sometimes observe that a frame is received twice. For example: I w… --- ## [Full list of differences between AP=4 and AP=1 on XBee 3](https://forums.digi.com/t/full-list-of-differences-between-ap-4-and-ap-1-on-xbee-3/22689)
**Author:** [@ematt](https://forums.digi.com/u/ematt)\ **Replies:** 1\ **Last updated:** [September 27, 2021, 8:47am UTC](https://forums.digi.com/t/full-list-of-differences-between-ap-4-and-ap-1-on-xbee-3/22689 "2021-09-27T08:47:26Z")
I have looked in the docs, but have been unable to find a full list of the differences between AP=1 (API enabled) and AP=4 (API enabled witn MicroPython). The reason I need to know is to identify strange behaviour I may… --- ## [Error while Receive SMS via python "SMS Received: xxx: POWER OFF,Not executed"](https://forums.digi.com/t/error-while-receive-sms-via-python-sms-received-xxx-power-off-not-executed/22512)
**Author:** [@Ba5tian](https://forums.digi.com/u/Ba5tian)\ **Replies:** 3\ **Last updated:** [July 7, 2021, 9:09am UTC](https://forums.digi.com/t/error-while-receive-sms-via-python-sms-received-xxx-power-off-not-executed/22512 "2021-07-07T09:09:47Z")
Hello, every time the modem receives a sms i get “Not executed” in Event Log. Box “Send received SMS messages to the command interpreter” is ticked. The python script is listed under “autorun commands”. Any ideas? --- ## [Sleep mode with several end devices and a gateway -](https://forums.digi.com/t/sleep-mode-with-several-end-devices-and-a-gateway/22246)
**Author:** [@RguStudent](https://forums.digi.com/u/RguStudent)\ **Replies:** 2\ **Last updated:** [March 1, 2021, 1:51pm UTC](https://forums.digi.com/t/sleep-mode-with-several-end-devices-and-a-gateway/22246 "2021-03-01T13:51:53Z")
I’m trying to understand sleep modes with regards to transmission and reception of data. A bit of background. This is for a university project where I intend to have a network of riverside water monitoring stations along… --- ## [XBEE3 receive() missing senders network in 802.15.4 vs DigiMesh](https://forums.digi.com/t/xbee3-receive-missing-senders-network-in-802-15-4-vs-digimesh/22205)
**Author:** [@LLamabobAL](https://forums.digi.com/u/LLamabobAL)\ **Replies:** 3\ **Last updated:** [February 16, 2021, 7:49am UTC](https://forums.digi.com/t/xbee3-receive-missing-senders-network-in-802-15-4-vs-digimesh/22205 "2021-02-16T07:49:22Z")
I have a 2-board point-to-point application where I was using DigiMesh. With Digimesh, I’m able to get the sender’s serial# via sender = received\_msg\[‘sender\_eui64’\]. I am converting the application to 802.15.4. sende… --- ## [Problem with mesh networking when multiple devices are transmitting at same time](https://forums.digi.com/t/problem-with-mesh-networking-when-multiple-devices-are-transmitting-at-same-time/21958)
**Author:** [@ANOM](https://forums.digi.com/u/ANOM)\ **Replies:** 9\ **Last updated:** [December 8, 2020, 8:11am UTC](https://forums.digi.com/t/problem-with-mesh-networking-when-multiple-devices-are-transmitting-at-same-time/21958 "2020-12-08T08:11:49Z")
we are currently working with Digi xbee3 micro module Digimesh 2.4 We are using receive handler callback function in co-ordinator code using that we are receiving data from end devices. settings for co-ordinator device… --- ## [At XBee3 router device micropython ps=1 at start-up, transmission to coord takes ~ 10sec.. too slow!](https://forums.digi.com/t/at-xbee3-router-device-micropython-ps-1-at-start-up-transmission-to-coord-takes-10sec-too-slow/21686)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 3\ **Last updated:** [August 20, 2020, 2:22pm UTC](https://forums.digi.com/t/at-xbee3-router-device-micropython-ps-1-at-start-up-transmission-to-coord-takes-10sec-too-slow/21686 "2020-08-20T14:22:04Z")
I have an XBee3 router device running micropython firmware at start-up (PS=1). At start-up the firmware transmits a message to the coordinator using xbee.transmit(coord64bit, message) The message is received by the coor… --- ## [Time between request and receive varies](https://forums.digi.com/t/time-between-request-and-receive-varies/21529)
**Author:** [@414184](https://forums.digi.com/u/414184)\ **Replies:** 2\ **Last updated:** [July 9, 2020, 9:59am UTC](https://forums.digi.com/t/time-between-request-and-receive-varies/21529 "2020-07-09T09:59:23Z")
I got some Zigbees S2C and trying to do some distance measurements with it. I have tried the RSSI option, and got some decent results (± 2-5m) but not where i am aiming for (± 0.5-1m). Second option is Time of Flight. … --- ## [Send and receive failed](https://forums.digi.com/t/send-and-receive-failed/21408)
**Author:** [@christopher](https://forums.digi.com/u/christopher)\ **Replies:** 2\ **Last updated:** [May 28, 2020, 9:39am UTC](https://forums.digi.com/t/send-and-receive-failed/21408 "2020-05-28T09:39:29Z")
Hello I have a XTP9B-DPS-001 board, and although it is properly connected to XCTU software, its transmitter is damaged. I replaced the ADF 7023 transceiver, but it still doesn’t send or receive data. Is this transceiver… --- ## [Receive data pause](https://forums.digi.com/t/receive-data-pause/19542)
**Author:** [@darren19940](https://forums.digi.com/u/darren19940)\ **Replies:** 0\ **Last updated:** [May 24, 2018, 7:57am UTC](https://forums.digi.com/t/receive-data-pause/19542 "2018-05-24T07:57:34Z")
Hi everyone, I use matlab transmit data to my microcontroller via Xbee S1, and sometimes the Xbee which connect with microcontroller( I call it Xbee Local ) connot receive data. The program on matlab keep transmit data a… --- ## [How do connect to a non-digi Zigbee device using CP X4 and pull data?](https://forums.digi.com/t/how-do-connect-to-a-non-digi-zigbee-device-using-cp-x4-and-pull-data/16170)
**Author:** [@Jnbijak](https://forums.digi.com/u/Jnbijak)\ **Replies:** 2\ **Last updated:** [April 24, 2018, 11:50am UTC](https://forums.digi.com/t/how-do-connect-to-a-non-digi-zigbee-device-using-cp-x4-and-pull-data/16170 "2018-04-24T11:50:10Z")
Hello there, I am looking to bind my Ti CC2650 SensorTag with my Digi Gateway and pull temperature data from it. The sensortag uses the HA profile for Zigbee and uses Cluster 402, Profile 302 for temperature. I currentl… --- ## [receiving uknown information from xbee's connected to atmega16 MCU.](https://forums.digi.com/t/receiving-uknown-information-from-xbees-connected-to-atmega16-mcu/19195)
**Author:** [@donthi](https://forums.digi.com/u/donthi)\ **Replies:** 0\ **Last updated:** [February 21, 2018, 3:52pm UTC](https://forums.digi.com/t/receiving-uknown-information-from-xbees-connected-to-atmega16-mcu/19195 "2018-02-21T15:52:23Z")
hai, i am working on a project in which three Xbees are to be connected to robots having atmega16 microcontrollers. three Xbees are configured with same channel and panid so for testing process i have connected one Xbee … --- ## [Receiving interrupt for MCU](https://forums.digi.com/t/receiving-interrupt-for-mcu/19118)
**Author:** [@ImperialHai](https://forums.digi.com/u/ImperialHai)\ **Replies:** 1\ **Last updated:** [February 6, 2018, 1:14pm UTC](https://forums.digi.com/t/receiving-interrupt-for-mcu/19118 "2018-02-06T13:14:27Z")
I have an Xbee module (XBee ZigBee Module) as an end device. This device is connected to a MCU (STM32F4). The MCU is in the sleep mode when there is no data received from the Xbee module. So I would like to use an inter… --- ## [Does UDP messages sent from the network get converted to serial for serial ports?](https://forums.digi.com/t/does-udp-messages-sent-from-the-network-get-converted-to-serial-for-serial-ports/19082)
**Author:** [@Joel\_broad](https://forums.digi.com/u/Joel_broad)\ **Replies:** 0\ **Last updated:** [January 25, 2018, 9:31am UTC](https://forums.digi.com/t/does-udp-messages-sent-from-the-network-get-converted-to-serial-for-serial-ports/19082 "2018-01-25T09:31:45Z")
I have a PS TS MEI/4 which i have configured for UDP communications with all serial ports through the web UI. I have written C code such that it reads and sends data from the network side of the server. I can receive da… --- ## [how to send and receive data in 1 program on xbee s2](https://forums.digi.com/t/how-to-send-and-receive-data-in-1-program-on-xbee-s2/17880)
**Author:** [@sams99](https://forums.digi.com/u/sams99)\ **Replies:** 6\ **Last updated:** [January 19, 2017, 10:58am UTC](https://forums.digi.com/t/how-to-send-and-receive-data-in-1-program-on-xbee-s2/17880 "2017-01-19T10:58:07Z")
how to send and receive data in 1 program on xbee s2 series? 1 xbee send and receive, 1 other send and receive too thankz --- ## [Difference between sent and received frame](https://forums.digi.com/t/difference-between-sent-and-received-frame/17125)
**Author:** [@gvi70000](https://forums.digi.com/u/gvi70000)\ **Replies:** 1\ **Last updated:** [July 28, 2016, 4:38am UTC](https://forums.digi.com/t/difference-between-sent-and-received-frame/17125 "2016-07-28T04:38:03Z")
Hi, I have 4 Xbees S2B, 1 coordinator and 3 Routers. From coordinator i am sending 7e 00 1b 10 01 00 00 00 00 00 00 ff ff ff fe 00 00 48 65 6c 6c 6f 20 57 6f 72 6c 64 21 21 95 and on the receiver side i am getting 7e… --- ## [handle all received packets from at command](https://forums.digi.com/t/handle-all-received-packets-from-at-command/16503)
**Author:** [@xbeeElisa](https://forums.digi.com/u/xbeeElisa)\ **Replies:** 5\ **Last updated:** [March 31, 2016, 9:18am UTC](https://forums.digi.com/t/handle-all-received-packets-from-at-command/16503 "2016-03-31T09:18:03Z")
hi, using and reworking the examples of CodeWarrior are able to send a command NI and receive the name of the coordinator on the network with the handler at\_command\_handle … sending the same request with a broadcast mess… --- ## [S3B will transmit not receive](https://forums.digi.com/t/s3b-will-transmit-not-receive/16027)
**Author:** [@simonpearce](https://forums.digi.com/u/simonpearce)\ **Replies:** 1\ **Last updated:** [January 6, 2016, 8:42am UTC](https://forums.digi.com/t/s3b-will-transmit-not-receive/16027 "2016-01-06T08:42:14Z")
Hi there, I have 2 S3b radios, one is a programmable unit 900MHz with freescale processor the other a non-programmable unit. The issue I have is one of communication between the two radios. When using a sparkfun base I … --- ## [Xbee 900HP Transparent Mode receiving data](https://forums.digi.com/t/xbee-900hp-transparent-mode-receiving-data/15870)
**Author:** [@walkietalkie123](https://forums.digi.com/u/walkietalkie123)\ **Replies:** 1\ **Last updated:** [December 1, 2015, 1:44pm UTC](https://forums.digi.com/t/xbee-900hp-transparent-mode-receiving-data/15870 "2015-12-01T13:44:49Z")
Hi, I am looking at buying the Xbee 900HP. I want to run it in transparent mode. I notice in the data sheet it doesn’t explicitly talk about what happens to data when it’s received over the air. So my question is when … --- ## [Packetloss at Receiver Side](https://forums.digi.com/t/packetloss-at-receiver-side/15641)
**Author:** [@bsnayak](https://forums.digi.com/u/bsnayak)\ **Replies:** 1\ **Last updated:** [October 23, 2015, 8:22am UTC](https://forums.digi.com/t/packetloss-at-receiver-side/15641 "2015-10-23T08:22:43Z")
My problem statement is very simple. I have one Arduino Uno and another Arduino Mega Board. Both have got Zigbee Shield mounted on them. One of them is working as Transmitter (Uno) and another (Mega) as a receiver. Code… --- ## [Minimizing receiver delay](https://forums.digi.com/t/minimizing-receiver-delay/15530)
**Author:** [@pwnyholm](https://forums.digi.com/u/pwnyholm)\ **Replies:** 5\ **Last updated:** [October 12, 2015, 9:54am UTC](https://forums.digi.com/t/minimizing-receiver-delay/15530 "2015-10-12T09:54:23Z")
I recently purchased and am new to the XBee Pro 900 MHz developer kit. Upon initial set up, I am dissapointed to see significant delay in my receiver. I have tested using both the latest DP and DM firmwares. To conduct t… --- ## [How do I use ConnectPort X2e Ethernet/Wifi to receive data send from multiple Xbee RF module?](https://forums.digi.com/t/how-do-i-use-connectport-x2e-ethernet-wifi-to-receive-data-send-from-multiple-xbee-rf-module/12996)
**Author:** [@dxc32](https://forums.digi.com/u/dxc32)\ **Replies:** 5\ **Last updated:** [June 25, 2015, 2:37pm UTC](https://forums.digi.com/t/how-do-i-use-connectport-x2e-ethernet-wifi-to-receive-data-send-from-multiple-xbee-rf-module/12996 "2015-06-25T14:37:17Z")
Hi Guys, I’m trying to write a python script that enable ConnectPort X2e to receive data sent from multiple Xbee S2 RF module(XB24-ZB). Does any one can give some suggestions about how to start? The current network con… --- ## [How receive data from another zigbee socs(Atmel) to ConnectPort X4 gateway](https://forums.digi.com/t/how-receive-data-from-another-zigbee-socs-atmel-to-connectport-x4-gateway/14600)
**Author:** [@veeranjaneyulu](https://forums.digi.com/u/veeranjaneyulu)\ **Replies:** 4\ **Last updated:** [March 27, 2015, 12:08am UTC](https://forums.digi.com/t/how-receive-data-from-another-zigbee-socs-atmel-to-connectport-x4-gateway/14600 "2015-03-27T00:08:37Z")
Hi all, I am new to ConnectPort X4. I would like to receive all 802.15.4 radios data on it. How to configure it to receive from another socs? How to set panid,channel in it? Please help me. Thanks in advance. The b… --- ## [Receving String correctly on RS232](https://forums.digi.com/t/receving-string-correctly-on-rs232/13028)
**Author:** [@nicola.pasquali](https://forums.digi.com/u/nicola.pasquali)\ **Replies:** 1\ **Last updated:** [February 3, 2015, 1:44pm UTC](https://forums.digi.com/t/receving-string-correctly-on-rs232/13028 "2015-02-03T13:44:52Z")
Hi, i’m making a software with an RCM3700 module to communicate with a GPRS modem using AT commands. I’ve experiencing some problems during receiving. Sending a request for inserting PIN i’m sending: “AT+CPIN=7159\\x0… --- ## [Which Module receive the data first](https://forums.digi.com/t/which-module-receive-the-data-first/13690)
**Author:** [@Thanatheos](https://forums.digi.com/u/Thanatheos)\ **Replies:** 3\ **Last updated:** [October 10, 2014, 4:40am UTC](https://forums.digi.com/t/which-module-receive-the-data-first/13690 "2014-10-10T04:40:36Z")
Hello, My question is simple, is it the closest Xbee that will receive data (from a broadcast) first ? I’m working on a simple way to estimate the position of a module but I need to know which one is the closest from m… --- ## [Reassembling Zigbee received packet](https://forums.digi.com/t/reassembling-zigbee-received-packet/13543)
**Author:** [@Wyrda](https://forums.digi.com/u/Wyrda)\ **Replies:** 0\ **Last updated:** [September 2, 2014, 1:02pm UTC](https://forums.digi.com/t/reassembling-zigbee-received-packet/13543 "2014-09-02T13:02:02Z")
Hi, I’m actually looking for a method in C++ reassembling packets effectively. In other words, I would like to find a way to manage packets I receive from the Xbee PRO S2B in API mode connected to my Arduino. The prob… --- ## [Every time a Zigbee module joins the ConnectPort X2 initiated Zigbee network I receive a packet that was not sent.](https://forums.digi.com/t/every-time-a-zigbee-module-joins-the-connectport-x2-initiated-zigbee-network-i-receive-a-packet-that-was-not-sent/13135)
**Author:** [@mdehoogh](https://forums.digi.com/u/mdehoogh)\ **Replies:** 1\ **Last updated:** [August 11, 2014, 6:55am UTC](https://forums.digi.com/t/every-time-a-zigbee-module-joins-the-connectport-x2-initiated-zigbee-network-i-receive-a-packet-that-was-not-sent/13135 "2014-08-11T06:55:20Z")
Without going into much detail now: I’m using a ConnectPort X2 to receive fixed-size packets from home grown sensor devices configured as Zigbee end device and Python code using a single Zigbee socket to receive and pro…