# \#redundancy

**URL:** https://forums.digi.com/tag/redundancy/1381.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [Howto failover and implement redundant Digimesh ??](https://forums.digi.com/t/howto-failover-and-implement-redundant-digimesh/20458)

<div class="topic-metadata">

**Author:** [@dazz](https://forums.digi.com/u/dazz)\
**Replies:** 0\
**Last updated:** [May 1, 2019, 9:35pm UTC](https://forums.digi.com/t/howto-failover-and-implement-redundant-digimesh/20458 "2019-05-01T21:35:25Z")

</div>

Hi I am trying to figure out how to add redundancy/failover to a Digimesh network. My Digimesh network is configured with one module acting as a hub for many satellite modules. The hub is specifically named so after b…

---

## [Digimesh Node joining procedure](https://forums.digi.com/t/digimesh-node-joining-procedure/18947)

<div class="topic-metadata">

**Author:** [@dazz](https://forums.digi.com/u/dazz)\
**Replies:** 2\
**Last updated:** [December 1, 2017, 9:37am UTC](https://forums.digi.com/t/digimesh-node-joining-procedure/18947 "2017-12-01T09:37:34Z")

</div>

Hi Scenario A is: Existing established digimesh network with aggregator node. A new node joins the network with DH/DL set to zero. All other settings are the same for all nodes. Question: How does the new node make…

---

## [Possible to set up a hunt group for for different IP's residing in different VLANs?](https://forums.digi.com/t/possible-to-set-up-a-hunt-group-for-for-different-ips-residing-in-different-vlans/17944)

<div class="topic-metadata">

**Author:** [@mweimer](https://forums.digi.com/u/mweimer)\
**Replies:** 0\
**Last updated:** [January 27, 2017, 5:26pm UTC](https://forums.digi.com/t/possible-to-set-up-a-hunt-group-for-for-different-ips-residing-in-different-vlans/17944 "2017-01-27T17:26:12Z")

</div>

I have a client device that has 2 serial ports (port A and port B ) for redundancy. There are 2 redundant servers that this device will query, each having a backup (servers 1-1 and 1-2 in VLAN1 and servers 2-1 and 2-2 i…

---

## [How to split signal between two connectport16 servers](https://forums.digi.com/t/how-to-split-signal-between-two-connectport16-servers/17467)

<div class="topic-metadata">

**Author:** [@misperry](https://forums.digi.com/u/misperry)\
**Replies:** 2\
**Last updated:** [September 28, 2016, 11:44am UTC](https://forums.digi.com/t/how-to-split-signal-between-two-connectport16-servers/17467 "2016-09-28T11:44:12Z")

</div>

We would like to split incoming data to two connectport16 servers. However, when we do we loose the signal? Is there a recommended spliter? we would like to use the following https://www.blackbox.com/en-us/store/Detail…

---

## [Can Digi One SP or other Digi product have serial tunneling to multiple Digi endpoints?](https://forums.digi.com/t/can-digi-one-sp-or-other-digi-product-have-serial-tunneling-to-multiple-digi-endpoints/13061)

<div class="topic-metadata">

**Author:** [@bhenning](https://forums.digi.com/u/bhenning)\
**Replies:** 2\
**Last updated:** [July 3, 2014, 2:27pm UTC](https://forums.digi.com/t/can-digi-one-sp-or-other-digi-product-have-serial-tunneling-to-multiple-digi-endpoints/13061 "2014-07-03T14:27:00Z")

</div>

Is it possible to configure a single Digi One SP to have serial tunnels to more than one other Digi One SP, such as for redundancy? Or is there another Digi product that can accomplish this? We need a way for one field …