# \#remote **URL:** https://forums.digi.com/tag/remote/756.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [how to set firmware version on compile to .bin image for remote flash update RCM6700](https://forums.digi.com/t/how-to-set-firmware-version-on-compile-to-bin-image-for-remote-flash-update-rcm6700/22951)
**Author:** [@ColbyInstruments](https://forums.digi.com/u/ColbyInstruments)\ **Replies:** 3\ **Last updated:** [March 2, 2022, 12:49pm UTC](https://forums.digi.com/t/how-to-set-firmware-version-on-compile-to-bin-image-for-remote-flash-update-rcm6700/22951 "2022-03-02T12:49:22Z")
Create .bin image compile to flash with DC 10.72E of my main application code (400K bytes). Using the \\RemoteProgramUpdate\\FIRMWARE\_REPORT.C running in ram reports the firmware version is 0.0 Can I change the firmware … --- ## [Remote updates](https://forums.digi.com/t/remote-updates/22731)
**Author:** [@Integrator](https://forums.digi.com/u/Integrator)\ **Replies:** 4\ **Last updated:** [October 14, 2021, 10:05am UTC](https://forums.digi.com/t/remote-updates/22731 "2021-10-14T10:05:55Z")
--- ## [remote manager](https://forums.digi.com/t/remote-manager/21999)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 2\ **Last updated:** [November 19, 2020, 3:37am UTC](https://forums.digi.com/t/remote-manager/21999 "2020-11-19T03:37:05Z")
hi Guys: I am trying to give this remote manager thing a drive through and thus far it is ANYTHING but intuitive. What is the default password field for? Obviously, myself, like any responsible sysadmin, dumps the def… --- ## [How can I set the remote XBEE3 to Transparent mode using an API packet then save it to non volatile memory?](https://forums.digi.com/t/how-can-i-set-the-remote-xbee3-to-transparent-mode-using-an-api-packet-then-save-it-to-non-volatile-memory/21894)
**Author:** [@Bruce\_Mc](https://forums.digi.com/u/Bruce_Mc)\ **Replies:** 3\ **Last updated:** [October 16, 2020, 7:16am UTC](https://forums.digi.com/t/how-can-i-set-the-remote-xbee3-to-transparent-mode-using-an-api-packet-then-save-it-to-non-volatile-memory/21894 "2020-10-16T07:16:49Z")
I want to set up remote XBEE3s remotely. I can set the coordinator and router both to API mode and send API packets to set it up. This works and I can write it to memory. I then need to set the coordinator and remote b… --- ## [NAT between Celluar Interface and Ethernet Interface](https://forums.digi.com/t/nat-between-celluar-interface-and-ethernet-interface/21741)
**Author:** [@hernandez](https://forums.digi.com/u/hernandez)\ **Replies:** 1\ **Last updated:** [September 15, 2020, 2:39am UTC](https://forums.digi.com/t/nat-between-celluar-interface-and-ethernet-interface/21741 "2020-09-15T02:39:32Z")
Hello. I will try to exemplify the topology. LAN(192.168.100.0/24)–\>FW\<–VPN–\>APN(10.0.80.0/21)\<–Digi WR11–\>192.168.150.0/24 I want to manage my Digi WR11 from a PC on the 192.168.100.0/24 network. I have a VPN from a… --- ## [Solution recommendation to remote access SBC and enable devices via GPIO](https://forums.digi.com/t/solution-recommendation-to-remote-access-sbc-and-enable-devices-via-gpio/21456)
**Author:** [@mascenzi](https://forums.digi.com/u/mascenzi)\ **Replies:** 3\ **Last updated:** [June 29, 2020, 7:56am UTC](https://forums.digi.com/t/solution-recommendation-to-remote-access-sbc-and-enable-devices-via-gpio/21456 "2020-06-29T07:56:04Z")
We are currently working on a project that we have done previously, sort of, however we need to scale down the size considerably. In the past we have used a Digi lr54 to connect remotely to a SBC and Arduino device. The … --- ## [Dongle not working](https://forums.digi.com/t/dongle-not-working/16836)
**Author:** [@Breisgauer](https://forums.digi.com/u/Breisgauer)\ **Replies:** 3\ **Last updated:** [June 17, 2020, 4:25am UTC](https://forums.digi.com/t/dongle-not-working/16836 "2020-06-17T04:25:25Z")
Hi, I’m testing AnywhereUSB to redirect a SafeNet HASP HL dongle to a Virtual Machine (VM). However the Dongle is showing up, but does not work. The VM is Windows 10 running in a Hyper-V environment on Windows 2012 R2. … --- ## [Modbus support on Transport WR31](https://forums.digi.com/t/modbus-support-on-transport-wr31/19851)
**Author:** [@wolfts89](https://forums.digi.com/u/wolfts89)\ **Replies:** 4\ **Last updated:** [January 29, 2020, 2:47pm UTC](https://forums.digi.com/t/modbus-support-on-transport-wr31/19851 "2020-01-29T14:47:12Z")
The short version: how am I supposed to use the WR31 to get data off of a Modbus device and onto the cloud (for an IoT dashboard/monitoring system)? I recently purchased a Transport WR31 with the intention of using it t… --- ## [How to connect XBee Zigbee module to home automation light control remote?](https://forums.digi.com/t/how-to-connect-xbee-zigbee-module-to-home-automation-light-control-remote/21012)
**Author:** [@Champion78](https://forums.digi.com/u/Champion78)\ **Replies:** 5\ **Last updated:** [January 8, 2020, 11:15am UTC](https://forums.digi.com/t/how-to-connect-xbee-zigbee-module-to-home-automation-light-control-remote/21012 "2020-01-08T11:15:20Z")
Hi, I have got the XBee3 ZigBee Mesh Kit and a Zigbee light switch like this: https://smarthomenz.nz/products/zigbee-remote-control-with-wall-mount?gclid=Cj0KCQiAxrbwBRCoARIsABEc9shWBO6d1a3XCTO6n2dZQ1W1JDQko1j1b\_HhRUXn6… --- ## [how to turn off access to the internal web UI management access with public IP](https://forums.digi.com/t/how-to-turn-off-access-to-the-internal-web-ui-management-access-with-public-ip/20668)
**Author:** [@SolarGuy](https://forums.digi.com/u/SolarGuy)\ **Replies:** 1\ **Last updated:** [August 23, 2019, 6:38pm UTC](https://forums.digi.com/t/how-to-turn-off-access-to-the-internal-web-ui-management-access-with-public-ip/20668 "2019-08-23T18:38:40Z")
I have a WR21 setup with a public IP and I want to turn off access to the internal web UI management access through the cell network. I use digi remote manager so I’ll still have access to make remote updates. I want t… --- ## [How do I remotely control the state of the I/O ports on my WR31 device?](https://forums.digi.com/t/how-do-i-remotely-control-the-state-of-the-i-o-ports-on-my-wr31-device/20702)
**Author:** [@tsh356](https://forums.digi.com/u/tsh356)\ **Replies:** 3\ **Last updated:** [August 21, 2019, 10:42pm UTC](https://forums.digi.com/t/how-do-i-remotely-control-the-state-of-the-i-o-ports-on-my-wr31-device/20702 "2019-08-21T22:42:43Z")
I need to establish a remote connection via the internet and read/write the state of the I/O ports. I have a static IP for the WR31. Thanks! --- ## [WR11XR and SMS remote admin intermittent issue.](https://forums.digi.com/t/wr11xr-and-sms-remote-admin-intermittent-issue/19564)
**Author:** [@JohanF](https://forums.digi.com/u/JohanF)\ **Replies:** 4\ **Last updated:** [April 3, 2019, 5:08pm UTC](https://forums.digi.com/t/wr11xr-and-sms-remote-admin-intermittent-issue/19564 "2019-04-03T17:08:13Z")
Hi I’m evaluating our first WR11XT but can’t get the remote SMS administration to work reliably. We have 35+ WR41 and WR21 and never seen this issue. Sometimes the router receives and executes the command and sometime… --- ## [connectport x2d access to remote radio via python](https://forums.digi.com/t/connectport-x2d-access-to-remote-radio-via-python/20388)
**Author:** [@BrianPez](https://forums.digi.com/u/BrianPez)\ **Replies:** 0\ **Last updated:** [April 3, 2019, 10:04am UTC](https://forums.digi.com/t/connectport-x2d-access-to-remote-radio-via-python/20388 "2019-04-03T10:04:46Z")
I have a ConnectPort X2D configured and running. I’ve read through most of the Digi Wiki Python Archive and don’t quite see what I am looking for and Google isn’t helping me. I see a section about sending AT commands… --- ## [Several XBee-units: Why does getParameter("DB") return the same value?](https://forums.digi.com/t/several-xbee-units-why-does-getparameter-db-return-the-same-value/20288)
**Author:** [@sixten](https://forums.digi.com/u/sixten)\ **Replies:** 0\ **Last updated:** [February 26, 2019, 10:26am UTC](https://forums.digi.com/t/several-xbee-units-why-does-getparameter-db-return-the-same-value/20288 "2019-02-26T10:26:09Z")
Hello! I have 3 XBee devices (XBee 2SC + XBee Grove dv. bd.) placed at different locations in a room. One is connected to my computer and the others are connected to other computers. I instantiate the local XBeeDevice … --- ## [WR11 Management Page - Can't Login From Web (Public IP)](https://forums.digi.com/t/wr11-management-page-cant-login-from-web-public-ip/20077)
**Author:** [@Clayton](https://forums.digi.com/u/Clayton)\ **Replies:** 2\ **Last updated:** [January 4, 2019, 10:13am UTC](https://forums.digi.com/t/wr11-management-page-cant-login-from-web-public-ip/20077 "2019-01-04T10:13:23Z")
Hi, I can access the management page from any browser but the username and password is not accepted. Firewall is OFF, I can PING, Page Loads No Problem. I can Log in no problem from eth0. I just can’t log in from the c… --- ## [Check if it is provisioned with a messaging subscription](https://forums.digi.com/t/check-if-it-is-provisioned-with-a-messaging-subscription/20112)
**Author:** [@adi1525](https://forums.digi.com/u/adi1525)\ **Replies:** 0\ **Last updated:** [December 18, 2018, 12:22pm UTC](https://forums.digi.com/t/check-if-it-is-provisioned-with-a-messaging-subscription/20112 "2018-12-18T12:22:53Z")
When I try connect my device to remotemanager.digi.com I get CONNECTOR\[928\]: CCAPI: edp\_tcp\_receive\_process: receive data facility = 0x00c0 CONNECTOR\[928\]: CCAPI: data point request response hint: ‘Error retrieving sub… --- ## [direct input/output from xbee s2c](https://forums.digi.com/t/direct-input-output-from-xbee-s2c/19558)
**Author:** [@pradeepk13](https://forums.digi.com/u/pradeepk13)\ **Replies:** 0\ **Last updated:** [May 30, 2018, 11:07am UTC](https://forums.digi.com/t/direct-input-output-from-xbee-s2c/19558 "2018-05-30T11:07:25Z")
plzz help i am using xbee s2c modules and i want to use them as direct input/output. i have configured them and they are connected but I cant get output from any IO pin as desired what should I do to get output from a… --- ## [Is there a way to remotely shutdown Digi WR31 model modem?](https://forums.digi.com/t/is-there-a-way-to-remotely-shutdown-digi-wr31-model-modem/19523)
**Author:** [@Andreasni](https://forums.digi.com/u/Andreasni)\ **Replies:** 5\ **Last updated:** [May 22, 2018, 9:23am UTC](https://forums.digi.com/t/is-there-a-way-to-remotely-shutdown-digi-wr31-model-modem/19523 "2018-05-22T09:23:05Z")
Is there anyway possible to remotely do a complete shutdown of WR31 modem? --- ## [how to access configuration web page thru cellular interface](https://forums.digi.com/t/how-to-access-configuration-web-page-thru-cellular-interface/19255)
**Author:** [@bcbbc](https://forums.digi.com/u/bcbbc)\ **Replies:** 2\ **Last updated:** [March 5, 2018, 11:42am UTC](https://forums.digi.com/t/how-to-access-configuration-web-page-thru-cellular-interface/19255 "2018-03-05T11:42:26Z")
I have two WR31 modems and both of them are in the Verizon Private Network which doesn’t have Internet access but with static IP addresses. Let’s say the initiator is 192.10.10.1 and the destination is 192.10.10.2. What … --- ## [Setting PWM value through Remote Manager](https://forums.digi.com/t/setting-pwm-value-through-remote-manager/19249)
**Author:** [@arunnediyasala](https://forums.digi.com/u/arunnediyasala)\ **Replies:** 0\ **Last updated:** [March 1, 2018, 3:58pm UTC](https://forums.digi.com/t/setting-pwm-value-through-remote-manager/19249 "2018-03-01T15:58:26Z")
am using DIGI XBee gateway , part number is 50001892-22 Rev C. I want to set a value to PWM through remote manager, the example you have given in the page number 88 to 90 attached document here with. In the example you h… --- ## [Set serial properties through Remote Manager task](https://forums.digi.com/t/set-serial-properties-through-remote-manager-task/18478)
**Author:** [@jgoslin](https://forums.digi.com/u/jgoslin)\ **Replies:** 3\ **Last updated:** [July 3, 2017, 11:19am UTC](https://forums.digi.com/t/set-serial-properties-through-remote-manager-task/18478 "2017-07-03T11:19:52Z")
I want to set serial port 8’s baud, flow control, and echo properties through a task run in Digi Remote Manager, but I can’t find how to set these through the command line. I’ve pored over all the documentation I could … --- ## [Serial sensor conected remotely to its PC manufacturer software](https://forums.digi.com/t/serial-sensor-conected-remotely-to-its-pc-manufacturer-software/18320)
**Author:** [@DemiaC](https://forums.digi.com/u/DemiaC)\ **Replies:** 1\ **Last updated:** [May 4, 2017, 9:23am UTC](https://forums.digi.com/t/serial-sensor-conected-remotely-to-its-pc-manufacturer-software/18320 "2017-05-04T09:23:16Z")
I´m tryibg to connect a serial sensor trough a couple of XBP08-DPSIT-024 to the sensor manufacturer software in a pc. In theory it has to be enough with setting the Xbee modules to connect and comunicate to each other … --- ## [Create a network with several senders and one receiver ?](https://forums.digi.com/t/create-a-network-with-several-senders-and-one-receiver/18285)
**Author:** [@chiappero](https://forums.digi.com/u/chiappero)\ **Replies:** 3\ **Last updated:** [April 25, 2017, 10:51am UTC](https://forums.digi.com/t/create-a-network-with-several-senders-and-one-receiver/18285 "2017-04-25T10:51:52Z")
I have three xBee A, B and C. A and B will receive a constant stream of data and their goal is to transmit it in transparent mode to C. C is on a raspberry and has to : -1 identify who’s sending the data -2 store the … --- ## [unable to find remote device](https://forums.digi.com/t/unable-to-find-remote-device/18136)
**Author:** [@oggy](https://forums.digi.com/u/oggy)\ **Replies:** 2\ **Last updated:** [March 13, 2017, 3:33pm UTC](https://forums.digi.com/t/unable-to-find-remote-device/18136 "2017-03-13T15:33:01Z")
I am powering my remote module from arduino only power connected and other module is on the computer but cant find as a remote module? what should I do --- ## [Safest method to switch/flash/script APN (i2gold to M2M) on already deployed WR44R's?](https://forums.digi.com/t/safest-method-to-switch-flash-script-apn-i2gold-to-m2m-on-already-deployed-wr44rs/17845)
**Author:** [@btibbetts](https://forums.digi.com/u/btibbetts)\ **Replies:** 1\ **Last updated:** [January 3, 2017, 9:17am UTC](https://forums.digi.com/t/safest-method-to-switch-flash-script-apn-i2gold-to-m2m-on-already-deployed-wr44rs/17845 "2017-01-03T09:17:08Z")
Hello! We have a handful of legacy cellular Transport 44R-housed PLC energy data-logger panels spread throughout the country from our prototype phase and are wondering if the the AT&T APN’s can be reliably switched remot… --- ## [Digi 9210 & Remote debug (UDP)](https://forums.digi.com/t/digi-9210-remote-debug-udp/17445)
**Author:** [@samppa](https://forums.digi.com/u/samppa)\ **Replies:** 1\ **Last updated:** [October 20, 2016, 4:49pm UTC](https://forums.digi.com/t/digi-9210-remote-debug-udp/17445 "2016-10-20T16:49:50Z")
Hello, we have Custom Board and there is Digi 9210. But we have not Jtag connection in the board. How to we use remote debug (Udp)? --- ## [Is Remote Command Mode secure?](https://forums.digi.com/t/is-remote-command-mode-secure/17525)
**Author:** [@BrendanSimon\_SEPL](https://forums.digi.com/u/BrendanSimon_SEPL)\ **Replies:** 3\ **Last updated:** [October 13, 2016, 8:55pm UTC](https://forums.digi.com/t/is-remote-command-mode-secure/17525 "2016-10-13T20:55:36Z")
I can configure an XBee (pro-SX) using Remote AT Commands (via XCTU). Is this secure? I couldn’t see anything in the user guide as to security regarding remote command mode. Is there a way to disable it, or only enabl… --- ## [How to verify remote wake up with two XBees?](https://forums.digi.com/t/how-to-verify-remote-wake-up-with-two-xbees/17460)
**Author:** [@MianTang](https://forums.digi.com/u/MianTang)\ **Replies:** 1\ **Last updated:** [September 28, 2016, 11:41am UTC](https://forums.digi.com/t/how-to-verify-remote-wake-up-with-two-xbees/17460 "2016-09-28T11:41:17Z")
Hi, I’m using two XBees(A and B) to implement remote wake-up with async cyclic mode. Configure A as “Indirect Msg Coordinator”, and the B as “Indirect Msg Poller”. For A, the SO mode is Normal while B’s SO mode is “Asyn… --- ## [Does the node need a delay for other operations after ATND command?](https://forums.digi.com/t/does-the-node-need-a-delay-for-other-operations-after-atnd-command/17048)
**Author:** [@MianTang](https://forums.digi.com/u/MianTang)\ **Replies:** 3\ **Last updated:** [July 8, 2016, 3:03pm UTC](https://forums.digi.com/t/does-the-node-need-a-delay-for-other-operations-after-atnd-command/17048 "2016-07-08T15:03:55Z")
Hi, I’m using XBee Pro 538, say I have three nodes. I sent ATND command to one node in order to find another two nodes. Then I wait for probably 20 seconds and get info of other two. After that, I want to configure both… --- ## [Remote Manager](https://forums.digi.com/t/remote-manager/16862)
**Author:** [@iadamovic](https://forums.digi.com/u/iadamovic)\ **Replies:** 2\ **Last updated:** [June 2, 2016, 8:04am UTC](https://forums.digi.com/t/remote-manager/16862 "2016-06-02T08:04:59Z")
i have changed default 22 port on Digi Transport to something else. Now, when i try to commenct to Digi transport router over Remote Manager i can’t connect. Where i can change to dial that changed port when connecting … [Next page](https://forums.digi.com/tag/remote/756.md?match_all_tags=true&page=1&tags%5B%5D=remote)