# \#response **URL:** https://forums.digi.com/tag/response/558.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Sleeping End device sometime does not received response send from co-ordinator.](https://forums.digi.com/t/sleeping-end-device-sometime-does-not-received-response-send-from-co-ordinator/22883)
**Author:** [@Sheetal\_Kasar](https://forums.digi.com/u/Sheetal_Kasar)\ **Replies:** 3\ **Last updated:** [January 7, 2022, 8:30am UTC](https://forums.digi.com/t/sleeping-end-device-sometime-does-not-received-response-send-from-co-ordinator/22883 "2022-01-07T08:30:37Z")
Hi I have design data monitoring system with data logging. I have made network of 8 transmitter(end device) which will send data to receiver(coordinator) after every one Minuit. In case of network issue, data will get … --- ## [How can I disable the response packet ?](https://forums.digi.com/t/how-can-i-disable-the-response-packet/22429)
**Author:** [@PaulPotat](https://forums.digi.com/u/PaulPotat)\ **Replies:** 0\ **Last updated:** [May 20, 2021, 9:39am UTC](https://forums.digi.com/t/how-can-i-disable-the-response-packet/22429 "2021-05-20T09:39:49Z")
Hello, I would like to know if it’s possible to disable the response packet (aka “Transmit Status”) you get when you send a packet using the send\_data\_async method from the library. From my understanding of the code, t… --- ## [Can we use (read & write) the characteristics request & response of XBee API BLE Service directly?](https://forums.digi.com/t/can-we-use-read-write-the-characteristics-request-response-of-xbee-api-ble-service-directly/22239)
**Author:** [@Manel\_LOUATI](https://forums.digi.com/u/Manel_LOUATI)\ **Replies:** 3\ **Last updated:** [March 1, 2021, 7:56am UTC](https://forums.digi.com/t/can-we-use-read-write-the-characteristics-request-response-of-xbee-api-ble-service-directly/22239 "2021-03-01T07:56:41Z")
--- ## [Extra byte "FF" being added to the response message](https://forums.digi.com/t/extra-byte-ff-being-added-to-the-response-message/19411)
**Author:** [@RBourque](https://forums.digi.com/u/RBourque)\ **Replies:** 1\ **Last updated:** [April 25, 2018, 3:06pm UTC](https://forums.digi.com/t/extra-byte-ff-being-added-to-the-response-message/19411 "2018-04-25T15:06:44Z")
Has anyone experienced additional bytes being added to a message that is passing through a Digi? For instance the message below is from a device and is an acceptable message if I remove one pair of the FF’s. So I believ… --- ## [Digimesh "Find Neighbor" Slow Response...](https://forums.digi.com/t/digimesh-find-neighbor-slow-response/17322)
**Author:** [@spacetime](https://forums.digi.com/u/spacetime)\ **Replies:** 2\ **Last updated:** [August 31, 2016, 8:50pm UTC](https://forums.digi.com/t/digimesh-find-neighbor-slow-response/17322 "2016-08-31T20:50:12Z")
Setup: -2 Xbee S1 2.4Ghz-DM -Firmware: 8073 Settings Default, except for : -API without Escape -Baud: 115200 -‘NO’ to 4(Append RSSI to end of response) One local Xbee is connected to /dev/ttyUSB0 via the Sparkfun … --- ## [What are the reasons an API Remote AT Request to toggle DOx state gets Status Error 01 response?](https://forums.digi.com/t/what-are-the-reasons-an-api-remote-at-request-to-toggle-dox-state-gets-status-error-01-response/16951)
**Author:** [@BallardHill](https://forums.digi.com/u/BallardHill)\ **Replies:** 3\ **Last updated:** [June 29, 2016, 9:02am UTC](https://forums.digi.com/t/what-are-the-reasons-an-api-remote-at-request-to-toggle-dox-state-gets-status-error-01-response/16951 "2016-06-29T09:02:37Z")
Units are XBP24 In XCTU Version: 6.3.0 Build ID: 20151110-8 toggling the DOx via Radio Configuration works fine. Using the Packet (Frame) Send in Terminal Mode results in the below: RQS: Remote AT Command Request (A… --- ## [Possible? Distributed reactions to IO pin read?](https://forums.digi.com/t/possible-distributed-reactions-to-io-pin-read/15677)
**Author:** [@vieuxnez](https://forums.digi.com/u/vieuxnez)\ **Replies:** 2\ **Last updated:** [October 29, 2015, 5:28pm UTC](https://forums.digi.com/t/possible-distributed-reactions-to-io-pin-read/15677 "2015-10-29T17:28:27Z")
I would like to have a set of Xbees monitoring a pin, and set aside a series of pins for leds providing distributed indicators of which xbees need attention. From my current reading, I believe I understand that this cou… --- ## [not able to receive response from xbee s2b coordinator for VR command through dotnet software](https://forums.digi.com/t/not-able-to-receive-response-from-xbee-s2b-coordinator-for-vr-command-through-dotnet-software/14762)
**Author:** [@poonam\_patil](https://forums.digi.com/u/poonam_patil)\ **Replies:** 1\ **Last updated:** [April 27, 2015, 10:42am UTC](https://forums.digi.com/t/not-able-to-receive-response-from-xbee-s2b-coordinator-for-vr-command-through-dotnet-software/14762 "2015-04-27T10:42:18Z")
I have configured a XBEE-PRO-S2B module as a coordinator. When I send VR command from xctu software to this coordinator it instantly gives response to it as shown: AT Command - VR - firmware version 7E 00 04 08 01 56 … --- ## [xBee API Response to ND command contains extra undefined characters](https://forums.digi.com/t/xbee-api-response-to-nd-command-contains-extra-undefined-characters/11744)
**Author:** [@dvorreiter](https://forums.digi.com/u/dvorreiter)\ **Replies:** 5\ **Last updated:** [November 3, 2014, 10:06am UTC](https://forums.digi.com/t/xbee-api-response-to-nd-command-contains-extra-undefined-characters/11744 "2014-11-03T10:06:16Z")
Hello I am using the xBee series 2 devices in API mode. When I send out the ND command to the local device , I correctly receive information from all devices on the network. However in the response I also receive two… --- ## [What are the kind of informations inside the NI part of a AT response?](https://forums.digi.com/t/what-are-the-kind-of-informations-inside-the-ni-part-of-a-at-response/13841)
**Author:** [@mfcava](https://forums.digi.com/u/mfcava)\ **Replies:** 3\ **Last updated:** [October 31, 2014, 11:07am UTC](https://forums.digi.com/t/what-are-the-kind-of-informations-inside-the-ni-part-of-a-at-response/13841 "2014-10-31T11:07:08Z")
I’m trying to discover devices, from a coordinator, in my network. So I sent an ND command to the coordinator and I’m correctly receiving response from other Xbee. The next step will be to store the information I’ve re… --- ## [X-BEE 1 (PROBLEMS WITH REMOTE COMMAND RESPONSE)](https://forums.digi.com/t/x-bee-1-problems-with-remote-command-response/13184)
**Author:** [@marioro](https://forums.digi.com/u/marioro)\ **Replies:** 8\ **Last updated:** [July 7, 2014, 2:47pm UTC](https://forums.digi.com/t/x-bee-1-problems-with-remote-command-response/13184 "2014-07-07T14:47:30Z")
Dear Friends, I´ve got two XBee serie 1 and I´m working in API mode. From time to time, when I send a data the acknowledge received is wrong. An example. I send a remote AT command (0x17) and I receive a right remote c… --- ## [I like to have coonfigurar the XBEE API response to a frame sent](https://forums.digi.com/t/i-like-to-have-coonfigurar-the-xbee-api-response-to-a-frame-sent/12533)
**Author:** [@maryxb](https://forums.digi.com/u/maryxb)\ **Replies:** 1\ **Last updated:** [May 8, 2014, 1:28pm UTC](https://forums.digi.com/t/i-like-to-have-coonfigurar-the-xbee-api-response-to-a-frame-sent/12533 "2014-05-08T13:28:30Z")
Hello. I am working in API mode, the coordinator (configured as API coordinator) send the frame 7e 00 04 08 52 44 42 1F to Xbee end device, but the xbee end device API set as I do not get a response. as I coonfigurar th… --- ## [remote XBee response to an IS command from coordinator](https://forums.digi.com/t/remote-xbee-response-to-an-is-command-from-coordinator/12385)
**Author:** [@kjhart0133](https://forums.digi.com/u/kjhart0133)\ **Replies:** 1\ **Last updated:** [January 13, 2014, 1:33pm UTC](https://forums.digi.com/t/remote-xbee-response-to-an-is-command-from-coordinator/12385 "2014-01-13T13:33:14Z")
I’m using an Arduino Uno to instruct the coordinator XBee to send an IS command (Force Sample) to the router XBee using Frame Type 0x17, a Remote AT Command Request. I’m expecting possibly two responses from the remote:… --- ## [How to wait for and read ND response in Python?](https://forums.digi.com/t/how-to-wait-for-and-read-nd-response-in-python/12017)
**Author:** [@alias\_neo](https://forums.digi.com/u/alias_neo)\ **Replies:** 2\ **Last updated:** [October 18, 2013, 6:10am UTC](https://forums.digi.com/t/how-to-wait-for-and-read-nd-response-in-python/12017 "2013-10-18T06:10:44Z")
Hi. I’m working on an IoT project at home, with the intention of having a dynamic network. As devices are added and removed from the network, the hub, the database of devices on the network is updated. So, I intend to h… --- ## [Insufficient Memory Error During RCI Request--Only sending 1KB](https://forums.digi.com/t/insufficient-memory-error-during-rci-request-only-sending-1kb/11627)
**Author:** [@lancercontrols](https://forums.digi.com/u/lancercontrols)\ **Replies:** 1\ **Last updated:** [September 29, 2013, 1:40pm UTC](https://forums.digi.com/t/insufficient-memory-error-during-rci-request-only-sending-1kb/11627 "2013-09-29T13:40:13Z")
We are trying to send some configuration data to our WR21 via an RCI request. The response that we get indicates an “Insufficient Memory Error”, however the documentation says we can send up to 32KB RCI requests are ours… --- ## [No response to AT commands.](https://forums.digi.com/t/no-response-to-at-commands/11870)
**Author:** [@Bubleek](https://forums.digi.com/u/Bubleek)\ **Replies:** 2\ **Last updated:** [August 22, 2013, 7:47am UTC](https://forums.digi.com/t/no-response-to-at-commands/11870 "2013-08-22T07:47:18Z")
I use the module XBee S6 and ATMega32 with UART. After power up I send “+ + +” to enter AT commands mode. Wait for an answer, “OK.” (Wait about 1 second). Expectant guard interval of silence (the default is 1000 ms) and …