# \#s6 **URL:** https://forums.digi.com/tag/s6/522.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Unable to perform analog sampling in XBee-Wifi module](https://forums.digi.com/t/unable-to-perform-analog-sampling-in-xbee-wifi-module/16609)
**Author:** [@Nathan\_KS](https://forums.digi.com/u/Nathan_KS)\ **Replies:** 3\ **Last updated:** [April 18, 2016, 1:21pm UTC](https://forums.digi.com/t/unable-to-perform-analog-sampling-in-xbee-wifi-module/16609 "2016-04-18T13:21:42Z")
I am currently working on remote transfer of the analog samples periodically by sampling the ADC pins of XBee-S6B module.I have done the following steps: 1.Connected to Wifi network 2.set the Source and destination por… --- ## [XBEE API Frame only 18 Bytes](https://forums.digi.com/t/xbee-api-frame-only-18-bytes/13812)
**Author:** [@assmeba](https://forums.digi.com/u/assmeba)\ **Replies:** 7\ **Last updated:** [December 1, 2014, 9:45am UTC](https://forums.digi.com/t/xbee-api-frame-only-18-bytes/13812 "2014-12-01T09:45:48Z")
Hallo every body, i have a problem with my Xbee network. My X-CTU terminal show me only 18 Bytes instead of 22 from the API data frame. currently i have 1 router and 1 Coordinator. The coordinator send 1Byte data from … --- ## [XBEE S6 TCP connection with Python](https://forums.digi.com/t/xbee-s6-tcp-connection-with-python/13620)
**Author:** [@chrisrose](https://forums.digi.com/u/chrisrose)\ **Replies:** 0\ **Last updated:** [September 21, 2014, 11:19pm UTC](https://forums.digi.com/t/xbee-s6-tcp-connection-with-python/13620 "2014-09-21T23:19:52Z")
I’m trying to connect Xbee S6 with Raspberry Pi & Python socket client. Xbee is not connected to processor/serial device. Only one sensor is conected to Xbee. I want check the state of this sensor with AT IS -command (tr… --- ## [SPI configuration on XBee S6](https://forums.digi.com/t/spi-configuration-on-xbee-s6/12716)
**Author:** [@burakin23](https://forums.digi.com/u/burakin23)\ **Replies:** 2\ **Last updated:** [August 29, 2014, 8:25am UTC](https://forums.digi.com/t/spi-configuration-on-xbee-s6/12716 "2014-08-29T08:25:06Z")
Hi Folks, I am using Texas Instrument-DSP chip (C5515). I did SPI configuration (I did pin connection between SPI pins and XBee pins) and the XBee is ready for AT commands. However i could not connect the device to a m… --- ## [Simultaneous connections supported for xbee wifi?](https://forums.digi.com/t/simultaneous-connections-supported-for-xbee-wifi/13365)
**Author:** [@rtek1000](https://forums.digi.com/u/rtek1000)\ **Replies:** 1\ **Last updated:** [August 26, 2014, 7:27am UTC](https://forums.digi.com/t/simultaneous-connections-supported-for-xbee-wifi/13365 "2014-08-26T07:27:50Z")
Please how many simultaneous connections are supported for xbee wifi? I would like to make a circuit of lamp control my house, but I have a brother and he also wants to control. Thanks. --- ## [Xbee Wifi S6 TCP socket connection](https://forums.digi.com/t/xbee-wifi-s6-tcp-socket-connection/13111)
**Author:** [@tma0](https://forums.digi.com/u/tma0)\ **Replies:** 1\ **Last updated:** [June 10, 2014, 10:35am UTC](https://forums.digi.com/t/xbee-wifi-s6-tcp-socket-connection/13111 "2014-06-10T10:35:54Z")
Hi, I’m using Xbee Wi-Fi S6 module in SPI mode as TCP server to connect devices which do not support UART or USB. TCP socket is opened and communication is passed to MCU. It works very well. But problem is that some out… --- ## [How do I read values using remote AT commands](https://forums.digi.com/t/how-do-i-read-values-using-remote-at-commands/12939)
**Author:** [@Alisson\_Oliveira](https://forums.digi.com/u/Alisson_Oliveira)\ **Replies:** 6\ **Last updated:** [May 15, 2014, 10:43am UTC](https://forums.digi.com/t/how-do-i-read-values-using-remote-at-commands/12939 "2014-05-15T10:43:16Z")
How do I read analog ports Xbee S6 with frame type 0x07? Example: I want to read the voltage applied to pin 20 (D0) of Xbee. The ip on the network it is 192.168.25.90. How would the frame? --- ## [What is actual power level for XBEE WiFi S6?](https://forums.digi.com/t/what-is-actual-power-level-for-xbee-wifi-s6/12611)
**Author:** [@vedacool](https://forums.digi.com/u/vedacool)\ **Replies:** 2\ **Last updated:** [May 11, 2014, 1:37am UTC](https://forums.digi.com/t/what-is-actual-power-level-for-xbee-wifi-s6/12611 "2014-05-11T01:37:55Z")
Model : XBee Wi-Fi (S6) Modules hi… i am using this model to do my work… but i am a bit lost at this information from manual. Power Level. Select/Read the power level at which the RF module transmits conducted power. … --- ## [How can I read the modem status frame on port SPI?](https://forums.digi.com/t/how-can-i-read-the-modem-status-frame-on-port-spi/11875)
**Author:** [@Bubleek](https://forums.digi.com/u/Bubleek)\ **Replies:** 2\ **Last updated:** [August 23, 2013, 12:50am UTC](https://forums.digi.com/t/how-can-i-read-the-modem-status-frame-on-port-spi/11875 "2013-08-23T00:50:44Z")
Hello! I have a module XBee S6 and board with a microprocessor. Yesterday I translated the module in SPI mode using AT commands on port UART and write these settings to the module. Now I can not read the modem status fra… --- ## [No response to AT commands.](https://forums.digi.com/t/no-response-to-at-commands/11870)
**Author:** [@Bubleek](https://forums.digi.com/u/Bubleek)\ **Replies:** 2\ **Last updated:** [August 22, 2013, 7:47am UTC](https://forums.digi.com/t/no-response-to-at-commands/11870 "2013-08-22T07:47:18Z")
I use the module XBee S6 and ATMega32 with UART. After power up I send “+ + +” to enter AT commands mode. Wait for an answer, “OK.” (Wait about 1 second). Expectant guard interval of silence (the default is 1000 ms) and … --- ## [HOW i can enter XBee S6 to SPI mode?](https://forums.digi.com/t/how-i-can-enter-xbee-s6-to-spi-mode/11859)
**Author:** [@Bubleek](https://forums.digi.com/u/Bubleek)\ **Replies:** 4\ **Last updated:** [August 21, 2013, 6:53am UTC](https://forums.digi.com/t/how-i-can-enter-xbee-s6-to-spi-mode/11859 "2013-08-21T06:53:36Z")
I have PCB with ATMega32(with SPI) and XBee S6, but i tired to enter XBee S6 to SPI mode (XBee S6 not answer or answer 000000000000000000 or FFFFFFFFFFFFFF). I read this instruction (http://www.digi.com/support/kbase/kba… --- ## [xbee s6b turned into a brick after an update](https://forums.digi.com/t/xbee-s6b-turned-into-a-brick-after-an-update/11639)
**Author:** [@fsrabad](https://forums.digi.com/u/fsrabad)\ **Replies:** 5\ **Last updated:** [July 11, 2013, 7:32am UTC](https://forums.digi.com/t/xbee-s6b-turned-into-a-brick-after-an-update/11639 "2013-07-11T07:32:03Z")
I updated my xbee s6b with X-CTU, and it’s not working anymore after that. I cant read or write parameters, i just can write/update firmware again, clicking option “Always update firmware”, but after a successful update… --- ## [max 1400 bytes RF Data in Rx IPV4 API frame but TCP window size used is 1460](https://forums.digi.com/t/max-1400-bytes-rf-data-in-rx-ipv4-api-frame-but-tcp-window-size-used-is-1460/11589)
**Author:** [@nickytoh](https://forums.digi.com/u/nickytoh)\ **Replies:** 0\ **Last updated:** [June 13, 2013, 12:52am UTC](https://forums.digi.com/t/max-1400-bytes-rf-data-in-rx-ipv4-api-frame-but-tcp-window-size-used-is-1460/11589 "2013-06-13T00:52:42Z")
The window size is 1460 bytes in TCP packet sent out by Xbee although max 1400 bytes RF Data is allowed in Rx IPV4 API frame. The window size of 1460 tells my PC application to send max 1460 bytes to Xbee in streaming m… --- ## [how to open socket using API TX IPV4 frame without first sending data](https://forums.digi.com/t/how-to-open-socket-using-api-tx-ipv4-frame-without-first-sending-data/11591)
**Author:** [@nickytoh](https://forums.digi.com/u/nickytoh)\ **Replies:** 0\ **Last updated:** [June 13, 2013, 12:52am UTC](https://forums.digi.com/t/how-to-open-socket-using-api-tx-ipv4-frame-without-first-sending-data/11591 "2013-06-13T00:52:27Z")
The PC application will start streaming data once socket is connected. But if it received some unexpected data, it stopped. So, I need to open a socket without first sending data. Any solution? Thanks you.