# \#serial-interface

**URL:** https://forums.digi.com/tag/serial-interface/53.md?match_all_tags=true&page=1&tags%5B%5D=serial-interface

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

**Page:** 2

---

## [UART communication fails between NI myRIO and XBEE PRO S3B](https://forums.digi.com/t/uart-communication-fails-between-ni-myrio-and-xbee-pro-s3b/16472)

<div class="topic-metadata">

**Author:** [@APT008](https://forums.digi.com/u/APT008)\
**Replies:** 1\
**Last updated:** [March 22, 2016, 10:04am UTC](https://forums.digi.com/t/uart-communication-fails-between-ni-myrio-and-xbee-pro-s3b/16472 "2016-03-22T10:04:59Z")

</div>

I am trying to connect an XBee Pro S3B to an NI myRIO, via a UART visa connection. I have all of the serial settings the same, such as Baud rate, parity, stop bits, and data bits. But every time I try to sent anything to…

---

## [Cisco 3020 HP Blade switch console connetcion](https://forums.digi.com/t/cisco-3020-hp-blade-switch-console-connetcion/15362)

<div class="topic-metadata">

**Author:** [@cronos](https://forums.digi.com/u/cronos)\
**Replies:** 4\
**Last updated:** [March 3, 2016, 3:23am UTC](https://forums.digi.com/t/cisco-3020-hp-blade-switch-console-connetcion/15362 "2016-03-03T03:23:33Z")

</div>

Hi all, as documented in questions before, we us a straight trough CAT V cable for the connetcion of the Cisco RJ45 console port to our Digi CM 16 console server. We can connect to the consoles via telnet but the output…

---

## [Failed to save configuration Digi One SP](https://forums.digi.com/t/failed-to-save-configuration-digi-one-sp/16205)

<div class="topic-metadata">

**Author:** [@liland](https://forums.digi.com/u/liland)\
**Replies:** 2\
**Last updated:** [February 3, 2016, 6:42pm UTC](https://forums.digi.com/t/failed-to-save-configuration-digi-one-sp/16205 "2016-02-03T18:42:00Z")

</div>

While trying to configure a Digi One SP, at the stage where you’ve entered the IP/Subnet/Gateway information and upload it to the unit I get an error saying “Failed to save configuration” The report says “Waiting for de…

---

## [Digi Edgeport/1 causes BSOD on a virtual Windows 7 each time a user disconnects/reboots](https://forums.digi.com/t/digi-edgeport-1-causes-bsod-on-a-virtual-windows-7-each-time-a-user-disconnects-reboots/16198)

<div class="topic-metadata">

**Author:** [@Pierre\_Gagnon](https://forums.digi.com/u/Pierre_Gagnon)\
**Replies:** 3\
**Last updated:** [February 3, 2016, 6:40pm UTC](https://forums.digi.com/t/digi-edgeport-1-causes-bsod-on-a-virtual-windows-7-each-time-a-user-disconnects-reboots/16198 "2016-02-03T18:40:11Z")

</div>

Hello, Zero PCoIP client Dell P25 (firmware 4.8) with Digi Edgeport/1 USB-to-Serial redirection on VMware View 6.2.0 generates BSOD each time a user disconnects/reboots VMs : edgeser64.sys WIN7\_DRIVER\_FAULT STOP 0x00…

---

## [Network graphics design xctu](https://forums.digi.com/t/network-graphics-design-xctu/16186)

<div class="topic-metadata">

**Author:** [@yousef\_aliswed](https://forums.digi.com/u/yousef_aliswed)\
**Replies:** 1\
**Last updated:** [February 1, 2016, 11:19am UTC](https://forums.digi.com/t/network-graphics-design-xctu/16186 "2016-02-01T11:19:27Z")

</div>

hello I want to know what is the language that use to develop the xctu and i want to make network that describe the module like in xctu thank you for support .

---

## [Is it possible for Xbee WiFi S6B module to support 1200 bps on the serial interface?](https://forums.digi.com/t/is-it-possible-for-xbee-wifi-s6b-module-to-support-1200-bps-on-the-serial-interface/16091)

<div class="topic-metadata">

**Author:** [@jcalderon](https://forums.digi.com/u/jcalderon)\
**Replies:** 1\
**Last updated:** [January 14, 2016, 8:48am UTC](https://forums.digi.com/t/is-it-possible-for-xbee-wifi-s6b-module-to-support-1200-bps-on-the-serial-interface/16091 "2016-01-14T08:48:45Z")

</div>

---

## [Xbee S8 DM, serial interface not working as it should](https://forums.digi.com/t/xbee-s8-dm-serial-interface-not-working-as-it-should/16038)

<div class="topic-metadata">

**Author:** [@ISkof](https://forums.digi.com/u/ISkof)\
**Replies:** 13\
**Last updated:** [January 14, 2016, 8:09am UTC](https://forums.digi.com/t/xbee-s8-dm-serial-interface-not-working-as-it-should/16038 "2016-01-14T08:09:12Z")

</div>

Hi, i’m having a strange problem with S8 DigiMesh 868MHz Xbee (XB8-DM, Function set: 865/868LP 80k, Firmware version: 8074, Hardware version: 2442) unit in API2 mode. The problem is with the UART interface. When two uni…

---

## [What do RX Overruns on the serial interface actualy mean?](https://forums.digi.com/t/what-do-rx-overruns-on-the-serial-interface-actualy-mean/15755)

<div class="topic-metadata">

**Author:** [@Michiel](https://forums.digi.com/u/Michiel)\
**Replies:** 1\
**Last updated:** [November 13, 2015, 12:36pm UTC](https://forums.digi.com/t/what-do-rx-overruns-on-the-serial-interface-actualy-mean/15755 "2015-11-13T12:36:16Z")

</div>

According to the manual: A receive overrun occurs when there are not enough buffers to receive incoming data which results in the received data being dropped. But i’m only sending 81 bytes every 10 seconds…

---

## [wr44 serial connections are established but no data is displayed](https://forums.digi.com/t/wr44-serial-connections-are-established-but-no-data-is-displayed/15529)

<div class="topic-metadata">

**Author:** [@dlg](https://forums.digi.com/u/dlg)\
**Replies:** 1\
**Last updated:** [October 8, 2015, 8:43am UTC](https://forums.digi.com/t/wr44-serial-connections-are-established-but-no-data-is-displayed/15529 "2015-10-08T08:43:09Z")

</div>

connections made via putty thru serial0 or asy ports show connections established but nothing is displayed in session?

---

## [Check for 12 ms idle time on serial port of ME 9210](https://forums.digi.com/t/check-for-12-ms-idle-time-on-serial-port-of-me-9210/13464)

<div class="topic-metadata">

**Author:** [@drakes](https://forums.digi.com/u/drakes)\
**Replies:** 2\
**Last updated:** [August 26, 2014, 2:26pm UTC](https://forums.digi.com/t/check-for-12-ms-idle-time-on-serial-port-of-me-9210/13464 "2014-08-26T14:26:00Z")

</div>

I’m using Net-OS 7.5 with a Connect ME 9210. When I receive data on the serial port I want to wait till there’s at least 12 ms of idle time on the serial port before sending this data on the network. I receive a block …

---

## [How to connect the ProxySG BlueCoat serial interface?](https://forums.digi.com/t/how-to-connect-the-proxysg-bluecoat-serial-interface/13295)

<div class="topic-metadata">

**Author:** [@cavfede](https://forums.digi.com/u/cavfede)\
**Replies:** 0\
**Last updated:** [July 10, 2014, 10:01am UTC](https://forums.digi.com/t/how-to-connect-the-proxysg-bluecoat-serial-interface/13295 "2014-07-10T10:01:49Z")

</div>

The Digi CM16 is not working with the serial interface of the ProxySG by BlueCoat. Might be the problem is related to the pin out that, for Digi serial interface, is based on Sun/cisco pinout. Is there any device/adapt…

---

## [Reflashed coordinator & lost serial connectivity, XCTU defaults wrong?](https://forums.digi.com/t/reflashed-coordinator-lost-serial-connectivity-xctu-defaults-wrong/13280)

<div class="topic-metadata">

**Author:** [@circleme](https://forums.digi.com/u/circleme)\
**Replies:** 4\
**Last updated:** [July 9, 2014, 9:28am UTC](https://forums.digi.com/t/reflashed-coordinator-lost-serial-connectivity-xctu-defaults-wrong/13280 "2014-07-09T09:28:23Z")

</div>

Device serial number XBP24BZ7WIT arrived as a Zigbee Router/AT. Used XCTU (6.1.1) to reflash as Zigbee coordinator (API mode). The firmware update seemed fine. But now I cannot connect. Add or discover devices leads …

---

## [CTS stays high after communication](https://forums.digi.com/t/cts-stays-high-after-communication/13230)

<div class="topic-metadata">

**Author:** [@david.sincock](https://forums.digi.com/u/david.sincock)\
**Replies:** 3\
**Last updated:** [July 2, 2014, 10:56am UTC](https://forums.digi.com/t/cts-stays-high-after-communication/13230 "2014-07-02T10:56:32Z")

</div>

XBee Pro900HP Firmware version 8070 Module sends and receives data in API mode for approx 35 hours, with occasional communication failures, but a retry by host is susccessful. Broadcast packages every 5 seconds, and un…

---

## [How big is the DOut buffer on an XBee](https://forums.digi.com/t/how-big-is-the-dout-buffer-on-an-xbee/11647)

<div class="topic-metadata">

**Author:** [@plater](https://forums.digi.com/u/plater)\
**Replies:** 1\
**Last updated:** [May 12, 2014, 2:56pm UTC](https://forums.digi.com/t/how-big-is-the-dout-buffer-on-an-xbee/11647 "2014-05-12T14:56:12Z")

</div>

How big is the DOUT buffer on the XBEE uart? The manual says the DIN buffer is 202 bytes but never says how big the DOUT buffer is?

---

## [About RCM6750 version](https://forums.digi.com/t/about-rcm6750-version/12894)

<div class="topic-metadata">

**Author:** [@maniac84](https://forums.digi.com/u/maniac84)\
**Replies:** 1\
**Last updated:** [May 5, 2014, 4:42am UTC](https://forums.digi.com/t/about-rcm6750-version/12894 "2014-05-05T04:42:51Z")

</div>

Hi guys, I know that there is a few version for the RCM6750 because I found out that it’s datasheet have different version. The newest is 90001191\_F. I have been using the 90001191\_E version for a while and only found o…

---

## [Is CTS on the SB6 (WIFI) an Input or Output](https://forums.digi.com/t/is-cts-on-the-sb6-wifi-an-input-or-output/12325)

<div class="topic-metadata">

**Author:** [@MrSmith](https://forums.digi.com/u/MrSmith)\
**Replies:** 1\
**Last updated:** [December 30, 2013, 5:09pm UTC](https://forums.digi.com/t/is-cts-on-the-sb6-wifi-an-input-or-output/12325 "2013-12-30T17:09:06Z")

</div>

I am trying to implement hardware flow control for the Xbee wifi device however I don’t know if to cross the CTS and RTS signals. The best way I can determine what to do is to know which is an input and which is an outpu…

---

## [how fast can I wrote to xbee (s2)](https://forums.digi.com/t/how-fast-can-i-wrote-to-xbee-s2/11996)

<div class="topic-metadata">

**Author:** [@remusac](https://forums.digi.com/u/remusac)\
**Replies:** 4\
**Last updated:** [September 28, 2013, 8:04pm UTC](https://forums.digi.com/t/how-fast-can-i-wrote-to-xbee-s2/11996 "2013-09-28T20:04:39Z")

</div>

Hi, I’m working on a distributed control algorithm for quadrotors. From Xbee’s (S2) spec sheet, it is noted that they can handle 250kbs. But is that per frame? The question I’m interested is how many packets can you w…

---

## [How to truncate the buffer value from the function ftoa.](https://forums.digi.com/t/how-to-truncate-the-buffer-value-from-the-function-ftoa/11873)

<div class="topic-metadata">

**Author:** [@dcloud](https://forums.digi.com/u/dcloud)\
**Replies:** 2\
**Last updated:** [September 12, 2013, 2:59am UTC](https://forums.digi.com/t/how-to-truncate-the-buffer-value-from-the-function-ftoa/11873 "2013-09-12T02:59:31Z")

</div>

I am using the ftoa function to convert a floating point number to a character string to send out over the RS-232 link to a LCD display. The function returns an exponent of 10 to compansate for the string. However the st…

---

## [Where can I find the API code for use with visual basic?](https://forums.digi.com/t/where-can-i-find-the-api-code-for-use-with-visual-basic/11829)

<div class="topic-metadata">

**Author:** [@JGalletta](https://forums.digi.com/u/JGalletta)\
**Replies:** 0\
**Last updated:** [August 8, 2013, 8:33am UTC](https://forums.digi.com/t/where-can-i-find-the-api-code-for-use-with-visual-basic/11829 "2013-08-08T08:33:51Z")

</div>

I’d like to find code examples for reading serial information being transmitted from the Xbee via an ATMEGA328P (stripped down arduino chip). Communications are running fine with the arduino chip, xbee, and x-ctu. thi…

---

## [Exception in serial thread on Connect ME](https://forums.digi.com/t/exception-in-serial-thread-on-connect-me/4230)

<div class="topic-metadata">

**Author:** [@rflach5](https://forums.digi.com/u/rflach5)\
**Replies:** 3\
**Last updated:** [July 1, 2013, 8:14am UTC](https://forums.digi.com/t/exception-in-serial-thread-on-connect-me/4230 "2013-07-01T08:14:57Z")

</div>

I have an application throwing an abort exception in my serial thread. (Net OS 7.4.2). I put a breakpoint in customizeExceptionHandler() and I set naCustomizeExceptionHandlerClearToContinue to FALSE. I then single step i…

---

## [how to use serial port in binary mode](https://forums.digi.com/t/how-to-use-serial-port-in-binary-mode/4318)

<div class="topic-metadata">

**Author:** [@mraisky](https://forums.digi.com/u/mraisky)\
**Replies:** 4\
**Last updated:** [June 7, 2011, 3:20pm UTC](https://forums.digi.com/t/how-to-use-serial-port-in-binary-mode/4318 "2011-06-07T15:20:03Z")

</div>

I am sending binary data over a serial (rs-232) port. a 0xD is getting inserted before 0xA It seems to me that the port is configured to work in text mode, not in binary. Here are the flags I am using /\* Open the ser…

---

## [Serial console on connect ME 9210](https://forums.digi.com/t/serial-console-on-connect-me-9210/4297)

<div class="topic-metadata">

**Author:** [@smachin](https://forums.digi.com/u/smachin)\
**Replies:** 1\
**Last updated:** [March 24, 2011, 11:11pm UTC](https://forums.digi.com/t/serial-console-on-connect-me-9210/4297 "2011-03-24T23:11:13Z")

</div>

Hi All, Out of the box does the connect ME 9210 support a serial console? If yes, can you have both a serial console and a 2nd UART running at the same time? TY, Sean

---

## [FIM for 2nd serial port on Connect ME 9210, Linux](https://forums.digi.com/t/fim-for-2nd-serial-port-on-connect-me-9210-linux/4262)

<div class="topic-metadata">

**Author:** [@dgrover](https://forums.digi.com/u/dgrover)\
**Replies:** 1\
**Last updated:** [October 12, 2010, 10:29pm UTC](https://forums.digi.com/t/fim-for-2nd-serial-port-on-connect-me-9210-linux/4262 "2010-10-12T22:29:59Z")

</div>

Using Digi EL vers 2, Digi EL 5.2, and the Connect ME 9210 module, booting over NFS. I’d like to use the serial port provided by FIM0 in addition to the regular Port A (and I’ll leave the console on Port A), but can’t s…

---

## [Serial communication missing bytes](https://forums.digi.com/t/serial-communication-missing-bytes/4220)

<div class="topic-metadata">

**Author:** [@auddia](https://forums.digi.com/u/auddia)\
**Replies:** 2\
**Last updated:** [May 25, 2010, 2:49pm UTC](https://forums.digi.com/t/serial-communication-missing-bytes/4220 "2010-05-25T14:49:06Z")

</div>

Hi, I’ve got a Connect ME 9210 development board with Digi ESP for Embedded Linux. I enable the serial device driver in the kernel in selecting : Character devices --&gt; Serial drivers --&gt; Digi NS921x serial port…

---

## [missing bytes (serial / RS232)](https://forums.digi.com/t/missing-bytes-serial-rs232/3592)

<div class="topic-metadata">

**Author:** [@compie](https://forums.digi.com/u/compie)\
**Replies:** 23\
**Last updated:** [August 10, 2009, 11:52am UTC](https://forums.digi.com/t/missing-bytes-serial-rs232/3592 "2009-08-10T11:52:00Z")

</div>

I have connected a Digi Connect ME to an Elmo Whistle motion controller via RS232. Sometimes I’m missing a number of bytes (For example: I should receive 5 bytes but I’m only receiving one). I have also connected a PC …

---

## [Digi Connect ME](https://forums.digi.com/t/digi-connect-me/3678)

<div class="topic-metadata">

**Author:** [@system](https://forums.digi.com/u/system)\
**Replies:** 0\
**Last updated:** [July 25, 2008, 1:59pm UTC](https://forums.digi.com/t/digi-connect-me/3678 "2008-07-25T13:59:21Z")

</div>

Hi When I reset my Dev board, after some time the Serial Console displays ‘@’ every second. I’m trying to press any key on the console within 5 seconds , so i can manually set up the Digi ME’s configuration parameters …

---

## [Problem reading data from serial port.](https://forums.digi.com/t/problem-reading-data-from-serial-port/3752)

<div class="topic-metadata">

**Author:** [@ebuddy](https://forums.digi.com/u/ebuddy)\
**Replies:** 0\
**Last updated:** [September 26, 2007, 1:13pm UTC](https://forums.digi.com/t/problem-reading-data-from-serial-port/3752 "2007-09-26T13:13:54Z")

</div>

I am new to programming with Digi kit. I have purchased the Digi development board with connect ME and net+OS. I have a serial device connected to the serial port 2 of the development board. I am trying to read and write…

---

## [RCI over Serial](https://forums.digi.com/t/rci-over-serial/3954)

<div class="topic-metadata">

**Author:** [@87jojo82](https://forums.digi.com/u/87jojo82)\
**Replies:** 0\
**Last updated:** [May 2, 2006, 8:13am UTC](https://forums.digi.com/t/rci-over-serial/3954 "2006-05-02T08:13:41Z")

</div>

Hello all, I want to use RCI over Serial to configure the WI-ME Module. And the Real Port to transfer data from the serial port over the Digi Connect WI-ME wireless port to another client. My problem is to change betwee…

---

## [How to communicate directly with a Connect Wi-Me via the serial port ?](https://forums.digi.com/t/how-to-communicate-directly-with-a-connect-wi-me-via-the-serial-port/4110)

<div class="topic-metadata">

**Author:** [@pcalvi](https://forums.digi.com/u/pcalvi)\
**Replies:** 0\
**Last updated:** [January 20, 2005, 10:29am UTC](https://forums.digi.com/t/how-to-communicate-directly-with-a-connect-wi-me-via-the-serial-port/4110 "2005-01-20T10:29:54Z")

</div>

Hi, I have some questions about the configuration of the serial port of the Connect Wi-Me (plugged on the development board) : When I boot for the first time my device, I would like to communicate with him directly via…

---

## [Serial Port RTS](https://forums.digi.com/t/serial-port-rts/4170)

<div class="topic-metadata">

**Author:** [@steved1](https://forums.digi.com/u/steved1)\
**Replies:** 0\
**Last updated:** [March 9, 2004, 11:55am UTC](https://forums.digi.com/t/serial-port-rts/4170 "2004-03-09T11:55:57Z")

</div>

Has anyone tried using the RTS line on the ME via the CRTSTOGGLE option in termios cflag? When I tried to use it the thread just locked up, apparently waiting for the send to complete. Steve

[Previous page](https://forums.digi.com/tag/serial-interface/53.md?match_all_tags=true&tags%5B%5D=serial-interface)

[Next page](https://forums.digi.com/tag/serial-interface/53.md?match_all_tags=true&page=2&tags%5B%5D=serial-interface)
