# \#startup

**URL:** https://forums.digi.com/tag/startup/3499.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [S2C does not start in transparent mode. Looks like a bootloader.](https://forums.digi.com/t/s2c-does-not-start-in-transparent-mode-looks-like-a-bootloader/23288)

<div class="topic-metadata">

**Author:** [@gbarry](https://forums.digi.com/u/gbarry)\
**Replies:** 2\
**Last updated:** [November 10, 2022, 1:36pm UTC](https://forums.digi.com/t/s2c-does-not-start-in-transparent-mode-looks-like-a-bootloader/23288 "2022-11-10T13:36:15Z")

</div>

I have two XBee S2C modules and I’m working through an online course. When I power up or reset these modules, XCTU can’t find them. Using a terminal program, I found that I could talk to them, and they are in some kind…

---

## [I/O line passing and powering up.](https://forums.digi.com/t/i-o-line-passing-and-powering-up/21795)

<div class="topic-metadata">

**Author:** [@Zaemo](https://forums.digi.com/u/Zaemo)\
**Replies:** 4\
**Last updated:** [September 22, 2020, 7:43am UTC](https://forums.digi.com/t/i-o-line-passing-and-powering-up/21795 "2020-09-22T07:43:32Z")

</div>

Hello again, I have line passing enabled on DIO4 - INPUT. I have several XB3’s transmitting to one XB3 with DIO4 set to OUTPUT. I have an N.O. momentary switch on these INPUT’s. However, when I power up a transmittin…

---

## [what happens when xbee is powered on?](https://forums.digi.com/t/what-happens-when-xbee-is-powered-on/18714)

<div class="topic-metadata">

**Author:** [@albe](https://forums.digi.com/u/albe)\
**Replies:** 1\
**Last updated:** [September 13, 2017, 10:48am UTC](https://forums.digi.com/t/what-happens-when-xbee-is-powered-on/18714 "2017-09-13T10:48:08Z")

</div>

Hi, I am searching for a description of what happens when an xBee zb is powered on? Does the xBee send any messages? Is this process documented? thank you -albe
