# \#to **URL:** https://forums.digi.com/tag/to/1303.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Xbee3 802.15.4 - problem - I'm migrating to XBEE3.](https://forums.digi.com/t/xbee3-802-15-4-problem-im-migrating-to-xbee3/20208)
**Author:** [@EduTruck](https://forums.digi.com/u/EduTruck)\ **Replies:** 7\ **Last updated:** [July 21, 2023, 3:06pm UTC](https://forums.digi.com/t/xbee3-802-15-4-problem-im-migrating-to-xbee3/20208 "2023-07-21T15:06:56Z")
I already use the XBEE S1 and S2 module in my product, I’m migrating to XBEE3. With the XBEE S1 / S2 modules, everything works fine. In XBEE3 with the UART firmware 802.15.4, either it works for a while and stops, or w… --- ## [How to setup a LAN (primary) to SIM (secondary) failover for continuous connection.](https://forums.digi.com/t/how-to-setup-a-lan-primary-to-sim-secondary-failover-for-continuous-connection/23156)
**Author:** [@Sherwin](https://forums.digi.com/u/Sherwin)\ **Replies:** 4\ **Last updated:** [July 21, 2022, 9:05am UTC](https://forums.digi.com/t/how-to-setup-a-lan-primary-to-sim-secondary-failover-for-continuous-connection/23156 "2022-07-21T09:05:29Z")
Hello, One of my clients sites has a ADSL connection which is flakey and loses connection periodically. We need to keep the server visible via a DDNS using the ADSL via Eth1 as the primary route and when it fails, to sw… --- ## [Conecting to plc5/30](https://forums.digi.com/t/conecting-to-plc5-30/22984)
**Author:** [@Majid\_Behboodi](https://forums.digi.com/u/Majid_Behboodi)\ **Replies:** 0\ **Last updated:** [March 4, 2022, 10:14am UTC](https://forums.digi.com/t/conecting-to-plc5-30/22984 "2022-03-04T10:14:46Z")
Hi evry one. I have a question about plc\_5/30. I can’t connect to it with RS232. But there is another plc-5 in other CO that i cannect with it easily. Is there anyone that help me. Is there any way to connect. --- ## [Portserver TS 2, DNP not working](https://forums.digi.com/t/portserver-ts-2-dnp-not-working/22865)
**Author:** [@ron.mingo](https://forums.digi.com/u/ron.mingo)\ **Replies:** 1\ **Last updated:** [December 22, 2021, 4:15pm UTC](https://forums.digi.com/t/portserver-ts-2-dnp-not-working/22865 "2021-12-22T16:15:31Z")
I have a DNP Ehternet master communicating to an serial RTU successfully, with a ConnectPort TS 16. I’m attempting to copy the exact setup, but using a Portserver TS 2. The “Connections” log in the Portserver shows “Conn… --- ## [There is not an active bootloader in the module.](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module/22425)
**Author:** [@sachin25](https://forums.digi.com/u/sachin25)\ **Replies:** 1\ **Last updated:** [June 22, 2021, 8:32am UTC](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module/22425 "2021-06-22T08:32:54Z")
Looking for active bootloader… \[ERROR\] There is not an active bootloader in the module. Resetting and entering bootloader… \[ERROR\] PutData1: Sent only 0 of 1 bytes --- ## [HOW to send the data fron routers to coordinator in xbee digimesh](https://forums.digi.com/t/how-to-send-the-data-fron-routers-to-coordinator-in-xbee-digimesh/22386)
**Author:** [@narendar\_reddy](https://forums.digi.com/u/narendar_reddy)\ **Replies:** 1\ **Last updated:** [May 10, 2021, 3:53am UTC](https://forums.digi.com/t/how-to-send-the-data-fron-routers-to-coordinator-in-xbee-digimesh/22386 "2021-05-10T03:53:23Z")
Actully we are working xbee s2c for street light project,we sends the data from coordinator to router ,it is fine but we need satatus of routers place like adc value and humdity,how to send the data from router to coord… --- ## [Connect a aqua device to digi S2C](https://forums.digi.com/t/connect-a-aqua-device-to-digi-s2c/22208)
**Author:** [@RonGroen](https://forums.digi.com/u/RonGroen)\ **Replies:** 3\ **Last updated:** [February 16, 2021, 8:02am UTC](https://forums.digi.com/t/connect-a-aqua-device-to-digi-s2c/22208 "2021-02-16T08:02:16Z")
Objective make a network with digi sc2 a controller and aqua door censor as end device 1 digi connection digi sc2 version 3 connected via an esp32 tx=tx rx=rx reset esp32=low 2 set digi to default value 3 write sett… --- ## [Connect Serial device to Serial port](https://forums.digi.com/t/connect-serial-device-to-serial-port/21906)
**Author:** [@richard\_lin](https://forums.digi.com/u/richard_lin)\ **Replies:** 0\ **Last updated:** [October 19, 2020, 1:22pm UTC](https://forums.digi.com/t/connect-serial-device-to-serial-port/21906 "2020-10-19T13:22:40Z")
Hello, I am using https://www.digi.com/products/networking/infrastructure-management/console-servers/digi-connect-it-16-48 (Digi Connect IT 16), and connecting by LAN to a Windows PC. I need to add 2 connectors. Can I … --- ## [Python code for ConnectPort X2 for redirecting data stream from Xbee to the DeviceCloud (Remote Manager)](https://forums.digi.com/t/python-code-for-connectport-x2-for-redirecting-data-stream-from-xbee-to-the-devicecloud-remote-manager/20296)
**Author:** [@mgmmath](https://forums.digi.com/u/mgmmath)\ **Replies:** 0\ **Last updated:** [March 1, 2019, 11:13am UTC](https://forums.digi.com/t/python-code-for-connectport-x2-for-redirecting-data-stream-from-xbee-to-the-devicecloud-remote-manager/20296 "2019-03-01T11:13:19Z")
This is part of a document called “A Beginner’s guide to send data to Device Cloud from a ZigBee Network” file:///C:/Users/mgolzar/Documents/New%20Temp%20Sensor%20Information/Gateway/guide\_to\_transmit\_data\_to\_Device\_Clo… --- ## [Replaced Xbee PRO Through hole with Surface mount but doesn't work, why??](https://forums.digi.com/t/replaced-xbee-pro-through-hole-with-surface-mount-but-doesnt-work-why/19135)
**Author:** [@casdsys](https://forums.digi.com/u/casdsys)\ **Replies:** 3\ **Last updated:** [February 15, 2018, 2:42pm UTC](https://forums.digi.com/t/replaced-xbee-pro-through-hole-with-surface-mount-but-doesnt-work-why/19135 "2018-02-15T14:42:50Z")
Ive been using XBee PRO’s for a while and would like to replace them on a new design with the Surface Mount type device. By just using the VCC, GND and ASSOC connected to a led, the led will flash to show that the radio … --- ## [how to Design circuit diagram?](https://forums.digi.com/t/how-to-design-circuit-diagram/18526)
**Author:** [@Vicky\_song](https://forums.digi.com/u/Vicky_song)\ **Replies:** 1\ **Last updated:** [July 18, 2017, 10:16am UTC](https://forums.digi.com/t/how-to-design-circuit-diagram/18526 "2017-07-18T10:16:00Z")
There is a technical problem that needs to be answered at present,our company bought some parts from www.hkin.com Now i wonder that, how to diy the Circuit diagram. for example, When the benchmark voltage source has 5V … --- ## [What Xbee Modules API interface? Is it different from HA profile of ZIgbee](https://forums.digi.com/t/what-xbee-modules-api-interface-is-it-different-from-ha-profile-of-zigbee/18240)
**Author:** [@santosh.india](https://forums.digi.com/u/santosh.india)\ **Replies:** 2\ **Last updated:** [April 11, 2017, 12:51pm UTC](https://forums.digi.com/t/what-xbee-modules-api-interface-is-it-different-from-ha-profile-of-zigbee/18240 "2017-04-11T12:51:11Z")
Does Xbee- S2C support temperature measurement cluster ID 0X0402? Do you mean Xbee-S2C partially support Zigbee HA profile? Why ones need to write Xbees API on application side, if it supports HA profile what are Xbee… --- ## [Multiple, point to point data transfer](https://forums.digi.com/t/multiple-point-to-point-data-transfer/17992)
**Author:** [@SOLARUX](https://forums.digi.com/u/SOLARUX)\ **Replies:** 2\ **Last updated:** [February 8, 2017, 7:54am UTC](https://forums.digi.com/t/multiple-point-to-point-data-transfer/17992 "2017-02-08T07:54:38Z")
Dear Mvut, What has been described is, in fact, not a network. Multiple, point to point data transfer. A, B, C, D are end devices with additional MCUs. The MCU of xbee (A) gives the instruction to xbee (A): xbee (A)… --- ## [Xbee settings Peer to peer and Point to point and Point to multi-point protocol](https://forums.digi.com/t/xbee-settings-peer-to-peer-and-point-to-point-and-point-to-multi-point-protocol/17985)
**Author:** [@SOLARUX](https://forums.digi.com/u/SOLARUX)\ **Replies:** 1\ **Last updated:** [February 3, 2017, 1:52pm UTC](https://forums.digi.com/t/xbee-settings-peer-to-peer-and-point-to-point-and-point-to-multi-point-protocol/17985 "2017-02-03T13:52:23Z")
A–300m–B–300m–C–300m–D Open terrain, API mode, xbee series 1. A, B, C, D are stations with xbee devices, each device has our MCU and is controlled by MCU. A knows the 16 bit address of B B knows the 16 bit address of… --- ## [The AnywhereUSB/2 driver after the Windows Server 2008 R2 updating isn't started](https://forums.digi.com/t/the-anywhereusb-2-driver-after-the-windows-server-2008-r2-updating-isnt-started/17788)
**Author:** [@sersid](https://forums.digi.com/u/sersid)\ **Replies:** 1\ **Last updated:** [December 15, 2016, 6:38pm UTC](https://forums.digi.com/t/the-anywhereusb-2-driver-after-the-windows-server-2008-r2-updating-isnt-started/17788 "2016-12-15T18:38:12Z")
We use AnywhereUSB/2. Everything successfully worked. After installation of updates of Windows Server 2008 R2 the driver ceased to be launched, Windows gives an error message: “It wasn’t succeeded to load driver \\Driver\\… --- ## [Is there a solution for the system hanging at startup when the file system is enabled?](https://forums.digi.com/t/is-there-a-solution-for-the-system-hanging-at-startup-when-the-file-system-is-enabled/17612)
**Author:** [@cityvic](https://forums.digi.com/u/cityvic)\ **Replies:** 3\ **Last updated:** [December 13, 2016, 2:14pm UTC](https://forums.digi.com/t/is-there-a-solution-for-the-system-hanging-at-startup-when-the-file-system-is-enabled/17612 "2016-12-13T14:14:43Z")
I am having the same issue with the system hanging when enabling the file system as reported by another user. I am wondering if there are any known issues/limitations with using the native file system on connectme -c mod… --- ## [RJ45 (8-PIN) TO DB9](https://forums.digi.com/t/rj45-8-pin-to-db9/17362)
**Author:** [@manjoel](https://forums.digi.com/u/manjoel)\ **Replies:** 1\ **Last updated:** [September 8, 2016, 10:35am UTC](https://forums.digi.com/t/rj45-8-pin-to-db9/17362 "2016-09-08T10:35:28Z")
I have connected a device with an rJ45 (8-pin) to DB9. The device has a connection, but when I try to send a command it fails. The connection stay with altpin on and off. what could I try to solve this --- ## [Realport on TS8 how the Ports are assigned](https://forums.digi.com/t/realport-on-ts8-how-the-ports-are-assigned/17216)
**Author:** [@mgatdigi](https://forums.digi.com/u/mgatdigi)\ **Replies:** 1\ **Last updated:** [August 9, 2016, 5:43pm UTC](https://forums.digi.com/t/realport-on-ts8-how-the-ports-are-assigned/17216 "2016-08-09T17:43:14Z")
We have a TS8 with 8 Ports and 6 POT Lines. If i install the Realport Software on Windows 2012R2 only 5 Lines are detected. The Communication over Port 771 works and a can call to outside from the determined Modems. H… --- ## [RCM3400 TX/RX to XT09 is crash with Time out waiting for respond](https://forums.digi.com/t/rcm3400-tx-rx-to-xt09-is-crash-with-time-out-waiting-for-respond/16999)
**Author:** [@kosta45](https://forums.digi.com/u/kosta45)\ **Replies:** 2\ **Last updated:** [June 30, 2016, 10:34am UTC](https://forums.digi.com/t/rcm3400-tx-rx-to-xt09-is-crash-with-time-out-waiting-for-respond/16999 "2016-06-30T10:34:19Z")
RCM3400 TX/RX to XT09 is crash with Time out waiting for respond . I have a RCM3400 runnibg port C at 9,600 bout and port D running at 19,200 bout. The port C connected by wire to the computer running win 7 or 10 and … --- ## [edgeport/8 detects only 6 out of 8 ports. What would issue and solution?](https://forums.digi.com/t/edgeport-8-detects-only-6-out-of-8-ports-what-would-issue-and-solution/16807)
**Author:** [@sriram.r](https://forums.digi.com/u/sriram.r)\ **Replies:** 3\ **Last updated:** [May 27, 2016, 6:11pm UTC](https://forums.digi.com/t/edgeport-8-detects-only-6-out-of-8-ports-what-would-issue-and-solution/16807 "2016-05-27T18:11:46Z")
edgeport/8 detects only 6 out of 8 ports.when installed in PC. what would be issue and solution --- ## [i get ( port 502 can't be reached ) when i try to connect to cj2m plc why ?](https://forums.digi.com/t/i-get-port-502-cant-be-reached-when-i-try-to-connect-to-cj2m-plc-why/16349)
**Author:** [@leineme](https://forums.digi.com/u/leineme)\ **Replies:** 0\ **Last updated:** [March 1, 2016, 12:04am UTC](https://forums.digi.com/t/i-get-port-502-cant-be-reached-when-i-try-to-connect-to-cj2m-plc-why/16349 "2016-03-01T00:04:00Z")
i am trying to connect to plc using modbus tcp/ip via ethernet cable in c# when i try the connection , it keeps telling me : port can’t be reached how can i fix that ? --- ## [Dropped Packets with XBEE modules](https://forums.digi.com/t/dropped-packets-with-xbee-modules/15975)
**Author:** [@richwriffel](https://forums.digi.com/u/richwriffel)\ **Replies:** 1\ **Last updated:** [December 23, 2015, 11:17am UTC](https://forums.digi.com/t/dropped-packets-with-xbee-modules/15975 "2015-12-23T11:17:07Z")
I purchased two XBee Series 1 modules and have them talking to each other via an FTDI based adapter from Adafruit, and a USB adapter directly. When running two consoles out of XCTU sending a 10 character packet separate… --- ## [Anywhere USB14 Security for multiple clients.](https://forums.digi.com/t/anywhere-usb14-security-for-multiple-clients/15816)
**Author:** [@otaskin](https://forums.digi.com/u/otaskin)\ **Replies:** 1\ **Last updated:** [November 19, 2015, 4:04pm UTC](https://forums.digi.com/t/anywhere-usb14-security-for-multiple-clients/15816 "2015-11-19T16:04:52Z")
Hello, We are using AnywherUSB14 and we are planning use for multiple clients however we are having problem to setup the security aspect of it. We have: Client A = Server 1 = Connects to RealportUSB Group2. Client B … --- ## [Transmitting data from a Sleep Support node to a sleeping network](https://forums.digi.com/t/transmitting-data-from-a-sleep-support-node-to-a-sleeping-network/15692)
**Author:** [@jackson](https://forums.digi.com/u/jackson)\ **Replies:** 1\ **Last updated:** [October 30, 2015, 11:41am UTC](https://forums.digi.com/t/transmitting-data-from-a-sleep-support-node-to-a-sleeping-network/15692 "2015-10-30T11:41:55Z")
Page 51, XBee-PRO S3B User Guide says: Synchronous Sleep Support Mode (SM=7): A sleep support node will only transmit normal data when the other nodes in the sleeping network are awake. If I send serial data to the mai… --- ## [connect bl4s100 to a display FD2000](https://forums.digi.com/t/connect-bl4s100-to-a-display-fd2000/15672)
**Author:** [@cubrix](https://forums.digi.com/u/cubrix)\ **Replies:** 0\ **Last updated:** [October 29, 2015, 10:23am UTC](https://forums.digi.com/t/connect-bl4s100-to-a-display-fd2000/15672 "2015-10-29T10:23:15Z")
Hi, is it possible to connect bl4s100 to a display FD2000 by modbus? I am just started to work with a microcontroller enviroment so Im not able to do nothing. --- ## [2 slaves are merging to spi master 1 spi1](https://forums.digi.com/t/2-slaves-are-merging-to-spi-master-1-spi1/15617)
**Author:** [@Arunkumar\_V\_N](https://forums.digi.com/u/Arunkumar_V_N)\ **Replies:** 1\ **Last updated:** [October 21, 2015, 12:28pm UTC](https://forums.digi.com/t/2-slaves-are-merging-to-spi-master-1-spi1/15617 "2015-10-21T12:28:45Z")
I am using wi.mx51 development board, i am trying to communicate spi with my slave device. I am accessing spi driver1.1 from userspace. it’s running fine, but -\> Powermanagement IC using spi 1.0 driver -\> i am using s… --- ## [How to configure xbees(series 2) for two way communication?](https://forums.digi.com/t/how-to-configure-xbees-series-2-for-two-way-communication/15451)
**Author:** [@Farhanahmad4473](https://forums.digi.com/u/Farhanahmad4473)\ **Replies:** 1\ **Last updated:** [September 24, 2015, 9:29am UTC](https://forums.digi.com/t/how-to-configure-xbees-series-2-for-two-way-communication/15451 "2015-09-24T09:29:53Z")
--- ## [How to configure PortServer II using mac address to acces login using PC or laptop](https://forums.digi.com/t/how-to-configure-portserver-ii-using-mac-address-to-acces-login-using-pc-or-laptop/15284)
**Author:** [@zwaneev](https://forums.digi.com/u/zwaneev)\ **Replies:** 2\ **Last updated:** [August 21, 2015, 10:53am UTC](https://forums.digi.com/t/how-to-configure-portserver-ii-using-mac-address-to-acces-login-using-pc-or-laptop/15284 "2015-08-21T10:53:33Z")
--- ## [Hi, How can I change operation mode from AT to API in XBee? thanks](https://forums.digi.com/t/hi-how-can-i-change-operation-mode-from-at-to-api-in-xbee-thanks/15096)
**Author:** [@mmd.parsi](https://forums.digi.com/u/mmd.parsi)\ **Replies:** 1\ **Last updated:** [July 9, 2015, 10:16am UTC](https://forums.digi.com/t/hi-how-can-i-change-operation-mode-from-at-to-api-in-xbee-thanks/15096 "2015-07-09T10:16:07Z")
Hi I am adding one more XBee in to my existing XBee network but it is in AT operating mode. I appreciate if you let me know that how I can change this new one’s mode to API mode. Other XBees are in API mode, so only th… --- ## [How can I configure xbee s2 in point to multipoint network in AT command mode?](https://forums.digi.com/t/how-can-i-configure-xbee-s2-in-point-to-multipoint-network-in-at-command-mode/14993)
**Author:** [@sam](https://forums.digi.com/u/sam)\ **Replies:** 1\ **Last updated:** [June 17, 2015, 10:54am UTC](https://forums.digi.com/t/how-can-i-configure-xbee-s2-in-point-to-multipoint-network-in-at-command-mode/14993 "2015-06-17T10:54:29Z")
[Next page](https://forums.digi.com/tag/to/1303.md?match_all_tags=true&page=1&tags%5B%5D=to)