# \#wr44 **URL:** https://forums.digi.com/tag/wr44/699.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [WR44 unable to login after factory reset](https://forums.digi.com/t/wr44-unable-to-login-after-factory-reset/23893)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 2\ **Last updated:** [February 15, 2023, 9:03am UTC](https://forums.digi.com/t/wr44-unable-to-login-after-factory-reset/23893 "2023-02-15T09:03:32Z")
Hello: I have a Digitransport WR44v2. I documented the setup in the router and then did a factory reset as need to reprogram it for another application. Upon coming back from the reset on 192.168.1.1 I cannot login via … --- ## [Operation of Primary and Secondary WWAN Connections](https://forums.digi.com/t/operation-of-primary-and-secondary-wwan-connections/22713)
**Author:** [@aclose](https://forums.digi.com/u/aclose)\ **Replies:** 0\ **Last updated:** [September 30, 2021, 10:15am UTC](https://forums.digi.com/t/operation-of-primary-and-secondary-wwan-connections/22713 "2021-09-30T10:15:04Z")
There are two WWAN connections on the WR44 R: WWAN Primary and WWAN Secondary. Can this device support two cellular antennas simultaneously or is the Secondary just for failover? --- ## [IX10 to WR21 IPsec issues](https://forums.digi.com/t/ix10-to-wr21-ipsec-issues/22637)
**Author:** [@Critt](https://forums.digi.com/u/Critt)\ **Replies:** 1\ **Last updated:** [September 2, 2021, 2:59am UTC](https://forums.digi.com/t/ix10-to-wr21-ipsec-issues/22637 "2021-09-02T02:59:27Z")
Tring to get a Digi IX10 and WR21 configuration with an IPsec tunnel Having trouble and not sure what else to do… Here is the event log on the WR21 5:33:02, 27 Aug 2021,(4364) IKE SA Removed. Peer: IX10,Negotiation Fa… --- ## [WR44 VRF overlapping subnets.](https://forums.digi.com/t/wr44-vrf-overlapping-subnets/22608)
**Author:** [@agarcorp](https://forums.digi.com/u/agarcorp)\ **Replies:** 0\ **Last updated:** [August 17, 2021, 11:32am UTC](https://forums.digi.com/t/wr44-vrf-overlapping-subnets/22608 "2021-08-17T11:32:02Z")
Looking for examples to set up WR44 using VRF. The purpose is to use 4 isolated overlapping subnets with NAT-ing over a cellular VPN. --- ## [Issue when trying to configure several TransPort peers using IKEv2 VPN Tunnel to a Cisco Responder](https://forums.digi.com/t/issue-when-trying-to-configure-several-transport-peers-using-ikev2-vpn-tunnel-to-a-cisco-responder/22586)
**Author:** [@Felipe1987](https://forums.digi.com/u/Felipe1987)\ **Replies:** 0\ **Last updated:** [August 5, 2021, 1:03pm UTC](https://forums.digi.com/t/issue-when-trying-to-configure-several-transport-peers-using-ikev2-vpn-tunnel-to-a-cisco-responder/22586 "2021-08-05T13:03:26Z")
Hi all, We followed the Application Note 58 to establish an IKEv2 VPN Tunnel Between a TransPort router WR44 and a Cisco Responder. It worked well when using only one peer, but if we configure another TransPort router W… --- ## [Is there a list of legacy products with corresponding end-of-sale/end-of-support dates?](https://forums.digi.com/t/is-there-a-list-of-legacy-products-with-corresponding-end-of-sale-end-of-support-dates/22060)
**Author:** [@Emil\_Isberg](https://forums.digi.com/u/Emil_Isberg)\ **Replies:** 1\ **Last updated:** [December 17, 2020, 1:26pm UTC](https://forums.digi.com/t/is-there-a-list-of-legacy-products-with-corresponding-end-of-sale-end-of-support-dates/22060 "2020-12-17T13:26:35Z")
Hi, I am looking into lifecycle information regarding WR44-U400-DE1-SW and WR44-U700-DE1-SW . Specifically any information regarding if those products are currently for sale or are legacy, and if so when the product(s) … --- ## [WR44 temperature\[SOLVED\]](https://forums.digi.com/t/wr44-temperature-solved/21808)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 1\ **Last updated:** [November 20, 2020, 6:24am UTC](https://forums.digi.com/t/wr44-temperature-solved/21808 "2020-11-20T06:24:35Z")
Hi All: I have an older WR44 and the temperature data is as follows: ss351205\>kycspare ss351205\>kycsparetemp mb: 52’C mo: 78’C OK This unit is in an airconditioned equipment room and the modem module is very hot. … --- ## [remote manager](https://forums.digi.com/t/remote-manager/21999)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 2\ **Last updated:** [November 19, 2020, 3:37am UTC](https://forums.digi.com/t/remote-manager/21999 "2020-11-19T03:37:05Z")
hi Guys: I am trying to give this remote manager thing a drive through and thus far it is ANYTHING but intuitive. What is the default password field for? Obviously, myself, like any responsible sysadmin, dumps the def… --- ## [Certificate Code Error\[SOLVED\]](https://forums.digi.com/t/certificate-code-error-solved/21772)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 2\ **Last updated:** [September 15, 2020, 7:47am UTC](https://forums.digi.com/t/certificate-code-error-solved/21772 "2020-09-15T07:47:34Z")
Hi All: Brand new WR44, event log filling up with this: 14:05:48, 15 Sep 2020,Certificate Code Error Lib: SSL routines Func: ssl3\_read\_bytes Reason: sslv3 alert certificate unknown How can I fix this? Cheers, joh… --- ## [Can the GPS facility on a WR44-U be used as a tracker?](https://forums.digi.com/t/can-the-gps-facility-on-a-wr44-u-be-used-as-a-tracker/21502)
**Author:** [@DMShell](https://forums.digi.com/u/DMShell)\ **Replies:** 1\ **Last updated:** [June 30, 2020, 4:40am UTC](https://forums.digi.com/t/can-the-gps-facility-on-a-wr44-u-be-used-as-a-tracker/21502 "2020-06-30T04:40:11Z")
I have acquired a few units (v1) that were originally fitted to railway vehicles as part of the remote monitoring system. I am going to build a Wi-fi access point and was also interested in using the GPS facility so we c… --- ## [new to python , need rescoures](https://forums.digi.com/t/new-to-python-need-rescoures/15869)
**Author:** [@ahmedosama](https://forums.digi.com/u/ahmedosama)\ **Replies:** 3\ **Last updated:** [September 17, 2019, 11:52am UTC](https://forums.digi.com/t/new-to-python-need-rescoures/15869 "2019-09-17T11:52:51Z")
dears i have a WR44 , i need some resources regarding how to deal with modbus & serial port using python thanks for any help --- ## [IPSec main mode failing connection](https://forums.digi.com/t/ipsec-main-mode-failing-connection/20034)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 5\ **Last updated:** [April 30, 2019, 12:42pm UTC](https://forums.digi.com/t/ipsec-main-mode-failing-connection/20034 "2019-04-30T12:42:53Z")
Hello All: I’m getting an error that is not in the latest version of the QN51 doc when connecting and IPsec tunnel to a Cisco IOS router in main mode: 10:17:22, 16 Nov 2018,(321) IKE SA Removed. Peer: 125.19.8.230,Nego… --- ## [port forwarding](https://forums.digi.com/t/port-forwarding/20396)
**Author:** [@ldelrosso](https://forums.digi.com/u/ldelrosso)\ **Replies:** 2\ **Last updated:** [April 5, 2019, 9:15am UTC](https://forums.digi.com/t/port-forwarding/20396 "2019-04-05T09:15:32Z")
port forwarding digi wr44-r --- ## [4 of my 13 Digi WR44-M800-AE1-RF Not establishing connection to VZW Network](https://forums.digi.com/t/4-of-my-13-digi-wr44-m800-ae1-rf-not-establishing-connection-to-vzw-network/20189)
**Author:** [@Iggster13](https://forums.digi.com/u/Iggster13)\ **Replies:** 3\ **Last updated:** [January 28, 2019, 7:49am UTC](https://forums.digi.com/t/4-of-my-13-digi-wr44-m800-ae1-rf-not-establishing-connection-to-vzw-network/20189 "2019-01-28T07:49:38Z")
I am in the process of setting up 12 Digi WR44-M800-AE1-RF Transport Modems to connect to various DAS deployments. We are using the standard startup Wizard and are running issues on 4 of the Modems. The SIM Cards we ar… --- ## [How to stop a WR44 from changing GPRS modes?](https://forums.digi.com/t/how-to-stop-a-wr44-from-changing-gprs-modes/19685)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 2\ **Last updated:** [July 7, 2018, 12:03am UTC](https://forums.digi.com/t/how-to-stop-a-wr44-from-changing-gprs-modes/19685 "2018-07-07T00:03:43Z")
Hello: I have a router in Haiti that comes up fine on GPRS, ppp1 comes up, IPSec comes up, the GRE tunnels connect inside the IPSec tunnels and then pings start to get answered from across the link. Within 5 seconds I s… --- ## [How do I only allow https outbound traffic?](https://forums.digi.com/t/how-do-i-only-allow-https-outbound-traffic/19584)
**Author:** [@m3rv89](https://forums.digi.com/u/m3rv89)\ **Replies:** 4\ **Last updated:** [June 26, 2018, 1:14pm UTC](https://forums.digi.com/t/how-do-i-only-allow-https-outbound-traffic/19584 "2018-06-26T13:14:45Z")
I have tried various firewall rule but i still cant allow specific https. I do notice pass out break end inspect-state rule is to allow outbound traffic. What if I only want https traffic to pass? --- ## [digi transport watchdog](https://forums.digi.com/t/digi-transport-watchdog/19561)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 2\ **Last updated:** [May 29, 2018, 6:22am UTC](https://forums.digi.com/t/digi-transport-watchdog/19561 "2018-05-29T06:22:43Z")
Hello: We have a site where a WR44V2 has locked up twice over the last 3 years. The guys came on site and all the lights were on. It seems obvious that the CPU internally to the router had froze. Is there a watchdog ci… --- ## [How to disable ppp (cell connection) on DIGI TRANSPORT WR44](https://forums.digi.com/t/how-to-disable-ppp-cell-connection-on-digi-transport-wr44/19080)
**Author:** [@antoinetr](https://forums.digi.com/u/antoinetr)\ **Replies:** 2\ **Last updated:** [February 5, 2018, 10:44am UTC](https://forums.digi.com/t/how-to-disable-ppp-cell-connection-on-digi-transport-wr44/19080 "2018-02-05T10:44:15Z")
Hi, I would like to disable the cell connection (ppp) so i can instead bring in the WAN via one of the Ethernet ports. I tried removing the SIM card but the router continues to want to dial up the cell connection. I t… --- ## [US GSM Carrier SIM Compatibility Question](https://forums.digi.com/t/us-gsm-carrier-sim-compatibility-question/17943)
**Author:** [@brienmorris](https://forums.digi.com/u/brienmorris)\ **Replies:** 2\ **Last updated:** [December 20, 2017, 8:30pm UTC](https://forums.digi.com/t/us-gsm-carrier-sim-compatibility-question/17943 "2017-12-20T20:30:53Z")
My friend purchased a WR44-L300-NE1-XH v2 on eBay and it has Novatel E371 LTE (AT&T) hardware, he has got it to successfully work on the AT&T network. Since it has dual SIM slots, my question is will other GSM SIM’s lik… --- ## [Firmware update bricks wr44 device](https://forums.digi.com/t/firmware-update-bricks-wr44-device/18706)
**Author:** [@marvinAptus](https://forums.digi.com/u/marvinAptus)\ **Replies:** 1\ **Last updated:** [September 12, 2017, 4:58am UTC](https://forums.digi.com/t/firmware-update-bricks-wr44-device/18706 "2017-09-12T04:58:12Z")
Today I upgraded my wr44 to the latest firmware (5.2.19.6). After this update my device does boot, but I can not acces the web interface. The leds on the unit keep doing loops. Something I’m forgetting to do here? Tha… --- ## [reboot on weak signal](https://forums.digi.com/t/reboot-on-weak-signal/18649)
**Author:** [@JamesMcCaig](https://forums.digi.com/u/JamesMcCaig)\ **Replies:** 5\ **Last updated:** [August 24, 2017, 9:49am UTC](https://forums.digi.com/t/reboot-on-weak-signal/18649 "2017-08-24T09:49:07Z")
Hello I have a series of WR44s and WR21s and i am looking for a way to reboot them if the signal strength becomes too low. For example signal strength weak reboot nothing too complicated I already can do this by time i… --- ## [WR44 - L2TP over 4G with PPP authentication (not IPSec): Throughput Query](https://forums.digi.com/t/wr44-l2tp-over-4g-with-ppp-authentication-not-ipsec-throughput-query/18504)
**Author:** [@alwayson](https://forums.digi.com/u/alwayson)\ **Replies:** 2\ **Last updated:** [July 6, 2017, 11:11am UTC](https://forums.digi.com/t/wr44-l2tp-over-4g-with-ppp-authentication-not-ipsec-throughput-query/18504 "2017-07-06T11:11:58Z")
With the Digi WR44v2, we run L2TP with PPP autentication over 4G, into our privale MPLS (not with IPSec), and we see a significant drop in spped compared to a direct connection to the provider network (EE). Typical 44Mbs… --- ## [WR44 R GPS stopped working after 5.2.17.12 firmware update, how to re-enable?](https://forums.digi.com/t/wr44-r-gps-stopped-working-after-5-2-17-12-firmware-update-how-to-re-enable/18233)
**Author:** [@gtoth](https://forums.digi.com/u/gtoth)\ **Replies:** 1\ **Last updated:** [April 10, 2017, 9:27am UTC](https://forums.digi.com/t/wr44-r-gps-stopped-working-after-5-2-17-12-firmware-update-how-to-re-enable/18233 "2017-04-10T09:27:14Z")
GPS was working under firmware 5.2.17.10. After upgrading firmware to 5.2.17.12 GPS stopped working and all GPS data fields on Management \> Telemetry \> GPS page show “Not available.” Other configuration parameters were … --- ## [Digi Transport WR44: Can you set NAT on a GRE tunnel interface?](https://forums.digi.com/t/digi-transport-wr44-can-you-set-nat-on-a-gre-tunnel-interface/18033)
**Author:** [@alwayson](https://forums.digi.com/u/alwayson)\ **Replies:** 3\ **Last updated:** [February 21, 2017, 9:59am UTC](https://forums.digi.com/t/digi-transport-wr44-can-you-set-nat-on-a-gre-tunnel-interface/18033 "2017-02-21T09:59:31Z")
I have two ethernet interfaces, eth0 traffic will be routed through the cellular WAN, eth1 traffic will be routed through a GRE tunnel carried over the Cellular connection. Can I configure the GRE tunnel interface with N… --- ## [How would I disable a Ipsec VPN? And is there an easy way to turn int off and on?](https://forums.digi.com/t/how-would-i-disable-a-ipsec-vpn-and-is-there-an-easy-way-to-turn-int-off-and-on/17978)
**Author:** [@Jason\_Intechsol](https://forums.digi.com/u/Jason_Intechsol)\ **Replies:** 2\ **Last updated:** [February 3, 2017, 3:23am UTC](https://forums.digi.com/t/how-would-i-disable-a-ipsec-vpn-and-is-there-an-easy-way-to-turn-int-off-and-on/17978 "2017-02-03T03:23:05Z")
I have purchased a system that has many of the WR44 routers in place. Some of them used to use a VPN connection to pass their SCADA information. Now I am using Modbus TCP and static IP’s so the VPN connection is disabled… --- ## [Sending GPS data to more than two connected IP devices (WR44)](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672)
**Author:** [@DC1](https://forums.digi.com/u/DC1)\ **Replies:** 2\ **Last updated:** [January 20, 2017, 1:58pm UTC](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672 "2017-01-20T13:58:10Z")
I’d like to send GPS data from the Digi Transport WR44 to three other IP devices. In the in web interface under configuration - position \>GPS, there are only two fields available. They are IP connection-1 and IP connect… --- ## [Forwarding Timeout, can "s" be floating point?](https://forums.digi.com/t/forwarding-timeout-can-s-be-floating-point/17812)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 7\ **Last updated:** [January 17, 2017, 11:44pm UTC](https://forums.digi.com/t/forwarding-timeout-can-s-be-floating-point/17812 "2017-01-17T23:44:40Z")
Hello: I have data coming in at 115200 baud with 1 bit per baud so effectively 115.2Kbps. 1 stop bit and 8 data bits is 9 bits, lets call it 10 bits for ease of the Arithmetic, takes 87 microseconds. I would like to se… --- ## [What are these network services?](https://forums.digi.com/t/what-are-these-network-services/17813)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 1\ **Last updated:** [December 20, 2016, 3:32am UTC](https://forums.digi.com/t/what-are-these-network-services/17813 "2016-12-20T03:32:38Z")
Hello: These items are in the router and either displayed and ignored in the manual are not even int he manual: Enable ASY Port Server Enable ZING Enable RCI over HTTP What do those mean? Cheers, john --- ## [Request for WR44 Mechanical Drawing](https://forums.digi.com/t/request-for-wr44-mechanical-drawing/17665)
**Author:** [@anuja.upale](https://forums.digi.com/u/anuja.upale)\ **Replies:** 1\ **Last updated:** [November 30, 2016, 2:12am UTC](https://forums.digi.com/t/request-for-wr44-mechanical-drawing/17665 "2016-11-30T02:12:56Z")
Hi, DOes digi have mechanical drawing for the WR44-L5G4-NE1-MD which includes not less than the mounting hole size, mounting hole spacing, and height of the unit? Preferrably in 3-D? I have looked through the User Guid… --- ## [WR44: Can I use both SIMs and aggregate the bandwidth?](https://forums.digi.com/t/wr44-can-i-use-both-sims-and-aggregate-the-bandwidth/17430)
**Author:** [@alwayson](https://forums.digi.com/u/alwayson)\ **Replies:** 1\ **Last updated:** [September 22, 2016, 2:04am UTC](https://forums.digi.com/t/wr44-can-i-use-both-sims-and-aggregate-the-bandwidth/17430 "2016-09-22T02:04:28Z")
[Next page](https://forums.digi.com/tag/wr44/699.md?match_all_tags=true&page=1&tags%5B%5D=wr44)